AFX MOTORSPORTS CAN004 Can Am Maverick Roof Rack Instruction Manual
- June 12, 2024
- AFX MOTORSPORTS
Table of Contents
AFX MOTORSPORTS CAN004 Can Am Maverick Roof Rack
Product Information
Sport Roof Rack for Can-Am Maverick X3/XDS/XRS
The Sport Roof Rack is an off-road accessory designed for use with Can-Am Maverick X3/XDS/XRS vehicles. It comes with a set of hardware including 4x 1/4 x 1 bolts with washers and nuts, 16x 1/4 x 1/2 bolts with nuts, and 24x 1/4 x 3/4 bolts with nuts. The installation requires a 5/32 Allen Key and a 7/16 Combination Wrench. The product consists of a Main Grill, Frontal Bar, Rear Bar, Frontal Leg, and Rear Leg. The installation process involves drilling two holes on the marks of the OEM plastic roof to align the rack bars with them. The Front and Rear corners are placed with the lateral, and the Front and Rear legs are set using screws with nuts. After assembly, all screws should be tightened for safety.
Note: that this product is for off-road use only.
Product Usage Instructions
- Drill two holes on the marks of the OEM plastic roof to align the rack bars.
- Place the Front and Rear corners with the lateral as shown in the image, using 8 1/4 x 1/2 screws with nuts.
- Set the Front and Rear legs as shown in the image using 8 1/4 x1/2 screws with nuts.
- Tighten all screws for safety.
Next, assemble the Roof Rack as a whole and install the cross bars in the indicated holes. Do not tighten the bolts until everything is sitting in its final place. Finally, assemble the Roof Rack completely over the roof, aligning it with the perforations done in step one. Use 4 1/4 x 1 screws with washers and nuts. Tighten all screws for safety.
Note: that this product is for off-road use only.
HOW TO INSTALL
Hardware
- (4x) 1/4” x 1” Bolts with washers and nuts.
- (16x) 1/4” x 1/2” Bolts with nuts.
- (24x) 1/4” x 3/4” Bolts with nuts.
Tools needed (Not Included)
- 5/32” Allen Key.
- 7/16” Combination Wrench.
INSTALLATION INSTRUCTIONS
- Drill 2 holes on the marks of the OEM plastic roof, in order to align the rack bars with them.
- Place the Front and Rear corners with the lateral (as it is shown in the image). Use an 8 1/4 x 1/2” screw with nuts.
- Set the Front and Rear legs (as it is shown in the image) using 8 1/4×1/2” screws with nuts.
- Tighten all the screws.
- Please asemble the Roof Rack as a whole, and after this procedure install the cross bars in the holes indicated below (Do notthighten the bolts until everything is sitting in this final place.
- Please assemble the Roof Rack (completely set) over the roof, aligning it with the perforations done in the first step. Use 4 1/4 x1” screws with the washer and nut.
- For safety tighten all the screws.
- Now you have finished the installation.
THIS PRODUCT IS FOR OFF-ROAD USE ONLY
Liability Statement
AFX Motorsports products are designed to best fit the user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by AFX Motorsports and is not recommended. AFX Motorsports products could interfere with other aftermarket accessories. If the user has aftermarket products on the machine, contact AFX Motorsports to verify that they will work together. Although AFX Motorsports has thousands of satisfied customers, user should be aware that installing bumpers, rock sliders, spare tire carriers, etc. will change the ride of the machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases the risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect users from severe injury or death. AFX Motorsports urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing AFX Motorsports products, the user agrees that should damages occur, AFX Motorsports will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. AFX Motorsports, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from AFX Motorsports. The total liability of the seller to the user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. AFX Motorsports will warranty only parts provided by AFX Motorsports. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by AFX Motorsports. AFX Motorsports parts and products are not warranted if the item was not installed properly, misused, or modified.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>