lorelli V1.0 PRINT RIMINI DI MARE Car Seat Instruction Manual

: August 14, 2024
: lorelli

Table of Contents

FEATURES
- Picture
IMPORTANT – READ CAREFULLY AND KEEP FOR FUTURE REFERENCE!
Read User Manual Online (PDF format)
Download This Manual (PDF format)

lorelli V1.0 PRINT RIMINI DI MARE Car Seat Instruction Manual

Scan the QR code to get more product information and manual instruction in more languages. Download QR Scanner App onto your device.

FEATURES

Picture

IMPORTANT – READ CAREFULLY AND KEEP FOR FUTURE REFERENCE!

SAFETY REQUIREMENT

This vehicle is suitable for children with a weight up to 22 kg or 4 years whichever comes first!
The height of the carried child in the stroller should not exceed 104 cm!
Use parking device if you do not hold the stroller with hand!
Do not leave the stroller on hills or inclined surfaces even if you have activated the parking system!
Parking device shall be engaged when placing and removing the children!
The shopping basket can take a maximum load of 2 kg!
Any load attached to the handle and/or on the back of the backrest and/or on the sides of the vehicle will affect the stability of the vehicle! Maximum load of the accessory bag 1 kg. Do not hang any additional bags!
Regularly check for loose parts! Make routine inspection, regularly maintain, clean and/or wash the vehicle!
The vehicle shall be used only for 1 child!
Accessories which are not approved by the manufacturer shall not be used!
Only spare parts delivered or recommended by the manufacturer/distributor can be used!
Make sure that the safety belts are placed properly!
The stroller should always be used under the supervision of an adult!
Do not allow children to suspend him/herself or play in the stroller!
Do not allow children to stand in the stroller!
Do not allow your child to stand on the seat and foot rest!
Do not use the stroller on uneven surfaces near fire or other dangerous places!
Do not use the stroller on stairs and escalators!
Fold the stroller before go upstairs and downstairs. Mounting the stroller on stairs, pavements and others
with the child in it and by pushing the handle causes deformation of the stroller and is out of warranty repair!
Adjusting of the back rest must be made only by a person read carefully the instruction rules for adjusting!
Any additional baggage left in the stroller may cause it to become unstable!
The person who assembles the stroller must be familiarised with its functions!
The front bar can not be used as a carry handle!
The chassis of this vehicle is compatible with a pram body „REYA” and with a car seat „JOY”.
This pushchair is designed to be used from baby’s birth. You shall use the most reclined position for newborn babies. The newborn child is not able to sit and hold his/her head up unassisted. Therefore do not fix the backrest in sitting position for children under 6 months!
Before using the product for the first time, remove all advertising material from it as well as the materials used to attach them to the product.
Do not place the carrycot close to open flame or another source of strong heat
The carry handies and the bottom of the carrycot should be checked regularly for signs of wear and damage
Before carrying or picking up the carrycot, ensure that the handle is in the correct position for use -the canopy should be open at a 90° to the horizontal..
Before carrying or picking up the carrycot, the bottom should be adjusted to the lowest position.
The head of the child in the carrycot must never be in a position lower than the body of the child;

WARNING

WARNING! Never leave the child unattended!
WARNING! Ensure that all the locking devices are engaged before use!
WARNING! To avoid injury ensure that the child is kept away when unfolding and folding this product!
WARNING! Do not let the child play with this product!
WARNING! Always use the restraint system!
WARNING! Check that the pram body or seat unit or car seat attachment devices are correctly engaged before use!
WARNING! This product is not suitable for running or skating!
WARNING! No additional mattress/ cushion shall be added.
WARNING! Always use the crotch belt in combination with the waist belt! To prevent injury from a fall or a slip off always use the shoulder straps!
WARNING! Keep away from fire!
WARNING! The pram body is meant to be used from the baby’s birth!
WARNING! The pram body is intended for a child who cannot sit up unassisted, turn over or get up on their hands and knees. Child maximum weight: 9 kg.
WARNING! The images on the front page and inside the manual are for illustrative purposes and may differ from the actual product.
WARNING! Do not carry the baby in the pram body!
WARNING! Only use on a firm, horizontal level and dry surface
WARNING! Do not let other children play unattended near the carry cot
WARNING! Do not use if any part of the carry cot is broken, torn or missing
WARNING! When using the car seat: This car seat is not mean to replace a cot or a bed for
sleeping. If your child needs to sleep, you need to place them in a suitable pram body, cot or bed. 19.
WARNING! Before using the product for the first time, remove all advertising material from it as well as the materials used to attach them to the product.

PARTS

Picture 1

Frame : – 1 pc.
Rear wheels : – 2 pcs.
Canopy : – 1 pc.
Bumper bar: – 1 pc.
Seat : 1 pc.
Front wheels: – 2 pcs.
Carrycot cover: 1 pc.
Carrycot with mattress: 1 pc.
Seat cover : 1 pc.
Backpack: 1 pc.

ASSEMBLING

Install the front and rear wheels by pressing them up into the frame until they lock in place. (Picture 1) **

Ensure that they are securely locked in place. To remove, press the button on the console and pull the wheel down (Picture 2).
**

Place the seat as shown in (Picture 3.) Please make sure you lock the seat onto the stroller frame after you hear a click.
To remove the seat from the frame, press the buttons on either side of the seat then pull it up **(Picture 4).

To turn the seat in the opposite direction, press the buttons on both sides of the seat and rotate it in the opposite direction, then secure it in place. Please make sure you lock the seat onto the frame after you hear a click (Picture 5).
**

Attaching the bumper bar – to install the bumper bar, guide both ends of the bumper bar into the
holes on either side of the seat (Picture 6).

To place the child in the seat, release one end of the bar and open it, then fasten it again (Picture 7). To remove the bumper bar, press the buttons on both sides and pull.
You can adjust the height of the handle (four positions) by pressing the button on the mechanism and moving it up or down (Picture 8).
You can adjust the position of the backrest by pulling up the handle to unlock the mechanism located on the back of the seat **(Picture 9/10).

**

Install the canopy to the seat by attaching it to the provided plastic elements on both sides of the seat. To adjust its position hold the upper part and move forward and backward to the desired position **(Picture 11).

**

Safety harness when using the seat, it is MANDATORY to put the child’s safety harness on! Attach the \straps and place them in the central locking buckle Adjust the length of the harness straps by pulling from the buckles. To release the harness, press on the central buckle button (Picture 12).
Adjusting the footrest – To change the position of the footrest, press the buttons on both sides simultaneously and adjust (Picture 13).

ATTENTION! Failure to observe this instruction will damage the locking mechanisms and will not be subject to warranty!
To park the stroller in one place, use the brake, which is on the side of the handle, by pressing the brake pedal (Picture 14). To release the brake, press the brake pedal with your foot again. Always engage the brake when the stroller is stopped.

Attention! The brake does not guarantee optimal power when on steep inclines! Therefore, never leave the stroller on an inclined surface with a child sitting or lying in the stroller!
WARNING! The brake on your stroller is a type of parking device. To activate the brake, bear in mind that the stroller must be stationary. Carefully press the brake pedal, while gently pushing the stroller front-and- back to synchronise the braking device and for more secure activation of the braking mechanism.

CARRYCOT

ATTENTION! Perform the following actions to prepare the newborn carrycot for use:

Place the cot on a table and remove the mattress and fabric liner.
Pressing the bottom, grasp the support straps and pull the towards the outside of the carrycot until they reach the limiters. (Picture 15)
Replace the mattress and the fabric liner.
Lift up the canopy frame until you hear a click ( Picture 16). It adjusts forward and backward as shown in the picture.
Install the carrycot on the stroller, ensuring that the adaptors are positioned and locked in the intended holes in the frame (Picture 17).

The click means that the carrycot is locked in place. In order to remove, simultaneously press the buttons on both sides of the carrycot and pull up (Picture 18). The carrycot should only be installed. facing the parents.
Reversible handle operation
Finally, place the foot muff and fasten it with a zipper and buttons onto the carrycot.
ATTENTION! Always check that the carrycot is securely attached by gently pulling it up and to the side.

REVERSIBLE HANDLE

Once the stroller is unfolded and the reversible handle is in working position, note that the wheels on the side of the handle lock in a straight line, while the front wheels have no angular restriction of movement (Picture 19).

Attention! Always use the brake mechanism that is on the reversible handle side. 2. The reversible handle is adjusted by simultaneously pulling up the mechanisms on both sides of the frame **(Picture 20, 21).

**

After moving the handle in one direction or the other, always make sure you hear a “Click”.

FOLDING AND UNFOLDING THE STROLLER

Attention:
Turn the handle in the direction of the larger wheels with the seat facing the parent.

Fold the canopy to the backrest as far as possible.
Press the button to retract the telescopic handle as far as possible (Picture 11). Pull the mechanisms on both sides of the frame up to release the lock (Picture 20), then push the handle down (Picture 22).

Lift the backrest adjustment mechanism forward and down until it is fully folded **(Picture 23).

Then grasp the carry handle under the seat and lift up to fully fold the stroller (Picture 24).
**

UNFOLDING

Grasp the carry handle with one hand and lift the frame from the side of the front wheels with the other hand (Picture 25).
Unfold the seat to the most upright position until you hear a click (Picture 26).
Raise the handle until you hear a “click” and the stroller locks, then do the same with the bumper bar. Always ensure that the frame is locked.
Folded view of the stroller **(Picture 27)

**

CARE AND MAINTENANCE

To clean the metal parts, wipe with a damp cloth and dry thoroughly with a dry cloth.
To clean the plastic parts, use a cloth, water and mild detergent.
To clean the textile parts, use an upholstery cleaner.
When the stroller is in storage never place other items on top of it.
Always dry and air out the stroller if it gets wet!
Periodically clean the wheel axles and plastic elements.
Always clean the axles of the wheels and the plastic elements after using the stroller on sand or other dusty
surfaces!
DO NOT GREASE the wheel axles or other moving parts of the stroller! Clean them only!
Periodically check for loose or damaged parts and if there are any, immediately replace them with new ones!