Minka Lavery 2161-66A Brentwood Shore 1 Light Coal Bell Pendant Instructions

October 30, 2023
MINKA LAVERY

Minka Lavery 2161-66A Brentwood Shore 1 Light Coal Bell Pendant Instructions

Minka Lavery 2161-66A Brentwood Shore 1 Light Coal Bell Pendant
Instructions

PREPARATION (Fig.1)

  1. Shut off power at the fuse box or circuit breaker box and remove the old fixture including the mounting hardware.

  2. Carefully unpack your new fixture and lay out all the parts in a clean area. Take care not to misplace any small parts necessary for installation.
    ASSEMBLING THE FIXTURE (Fig. 1)Minka Lavery 2161-66A Brentwood Shore 1
Light Coal Bell Pendant Instructions - Fig 1

  3. Determine the desired hanging height and thread rods (F1, F2 and F3) to all thread (G) on the fixture body. Attach canopy (D) by screwing onto rod (F1). Carefully pass the wires through each rod during assembly.
    Note: Remove all thread, if installing with one 6″ rod only.

  4. Attach the mounting plate (A) to the junction box (not included) with mounting screws (B) (Size: #8-32N*L0.5″). The side of the mounting plate (A) with “GND” marked on it and two convex points must face out.
    CONNECTING THE WIRES (Fig. 2)

  5. Connect the electrical wires as shown in fig 2, making sure that all wire connectors are secured. If your junction box has a ground wire (green or bare copper), connect the fixture’s ground wire to it. Otherwise, connect the fixture’s ground wire directly to the mounting plate (A) using the green screw provided.

  6. Tuck wire connectors neatly into the junction box.
    COMPLETING THE INSTALLATION (Fig. 1)

  7. Place canopy (D) over mounting plate (A) and secure with screws (E).

  8. Place glass shade (I) and metal ring (J) over socket (H) and fasten with socket ring (K).

  9. Install (1) one medium base bulb (L) up to 60 watts each or CFL or LED equivalent (not included) in accordance with the fixture specification –DO NOT EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!).

Your installation is now complete. Return power to the junction box and test the fixture.
Note: Illustration (Fig. 1) on this manual is for installation purposes only. It may or may not be identical to the fixture purchased.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

MINKA LAVERY User Manuals

Related Manuals