MINKA LAVERY 72806 Hillside Manor 1-Light Black and Gold Aluminum Hardwired Outdoor Weather Resistant Post Light Instruction Manual
- October 30, 2023
- MINKA LAVERY
Table of Contents
INSTALLATION INSTRUCTIONS
Model #72806
READ AND SAVE THESE INSTRUCTIONS
72806 Hillside Manor 1-Light Black and Gold Aluminum Hardwired Outdoor
Weather Resistant Post Light
WARNING ! SHUT POWER OFF ATFUSEO RCIR CUIT BREAKER .
PREPARING FOR INSTALLATION (Fig. 1)
-
Shut off the power at the fuse box or circuit breaker box and remove the old fixture, including the mounting hardware.
-
Carefully unpack your new fixture and lay out all the parts in a clear area. Take care not to lose any small parts necessary for installation.
-
Pull the black, white, and ground wires out of base of post (A).
CONNECTING THE WIRES (Fig. 2) -
While supporting fixture, connect electrical wires as shown in Fig. 2. If your post has a ground wire (green or bare copper), connect fixture ground wire to it. If not, consult your electrician for proper grounding (Fig.2).
-
After wires are connected, tuck them carefully inside the post cup (A) (not included).
COMPLETING THE INSTALLATION (Fig. 1) -
Place the fixture onto post (A) and secure with screws (B). (Fig.1)
-
Un-thread the nuts (D) and remove frame (I).
-
Install (1) one medium base bulb (E) up to 60 watts or CFL or LED equivalent (not included) in accordance with the fixture specification.
DO NOT EXCEED THE MAXIMUM WATTAGE RATING! (NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE!) -
Install frame (I) and secure with nuts (D).
Your installation is now complete. Return power and test the fixture.
“CAUTION-RISK OF FIRE CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH
CIRCUIT CONDUCTOR”
ATTENTION – RISQUE D’INCENDIE, CONSULTER
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>