CYGNETT CY3477PBCHE Chargeup Boost 2nd Generation 10K Power Bank User Manual

: June 4, 2024
: CYGNETT

Table of Contents

Charge Your Device
Product Specifications
Read User Manual Online (PDF format)
Download This Manual (PDF format)

CHARGEUP BOOST 2nd
Generation 10K
USER MANUAL

A Power button
B LED battery indicator
C USB-A output
D USB-A output
E USB-C input & output

Charge Your Device

Recharge your device(s) by connecting a compatible cable to the USB-A output(s) (C/D) and/or USB-C output (E). Press the power button (A), and your device(s) should begin to charge. When you are finished charging your device(s), remove the cables from your power bank, and it will turn off automatically.
To check the remaining charge on your power bank, press the power button (A) once. The LED battery indicator (B) will show the remaining charge from 0 to 100.
Recharge Your Power Bank
To recharge your power bank, use the included USB-C to USB-A cable, connect the USB-A to a compatible USB-A charger, then insert the USB-C connector into the USB-C input (E). Alternatively, use a USB-C to USB-C cable and a USB-C charger. When recharging, the LED battery indicator (B) will flash, indicating the remaining charge.

Product Specifications

Name	ChargeUp Boost 2nd Generation 10K
Item Number	CY3477PBCHE

Caution

Please read all warnings for your safety and optimal user experience. Please read and follow these instructions carefully and retain them for your records.

Disposal of a battery into a fire or a hot oven, mechanically crushing or cutting of a battery, can result in an explosion.
Leaving a battery at an extremely high temperature can result in an explosion or the leakage of flammable liquid or gas.
A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
The power bank will generate heat when charging. Always charge in a well-ventilated area. Do not charge under pillows, blankets or on flammable surfaces.
Keep the power bank away from heat sources, direct sunlight, combustible gas, humidity, water, or other liquids.
Do not disassemble, open, microwave, incinerate, paint or insert foreign objects into the power bank.
Do not subject the power bank to mechanical shock such as crushing, bending, puncturing, or shredding. Avoid dropping or placing heavy objects on the power bank.
Do not short-circuit the power bank or store it in a receptacle where it may be short circuited by other metallic or conductive objects.
Caution
Do not operate the power bank if it has been wet or otherwise damaged, to prevent electric shock, explosion, and/or injury. Contact the dealer or authorized agent.
Usage of a power bank by children should always be supervised.
Please note that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Cygnett
takes no responsibility for damages caused by incorrect use of its products. Made in China.

**** This symbol on the product indicates that this product shall not be treated as household waste. Instead, it shall be sent to the applicable collection point for the recycling of electronic equipment. By ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and human health. For more information about the recycling of this product, please contact your local city office.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to connect the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Cygnett is a trademark of Cygnett Pty Ltd. Made in China.

Cygnett Pty Ltd
858 Lorimer Street, Port Melbourne,
Victoria, 3207, Australia
Cygnett USA Inc
3838 W Carson St, Ste 220, Torrance, CA 90503
Cygnett UK Limited
71-75 Shelton St, London, WC2H 9JQ
Cygnett EU
Office 2, Goudstraat 65,
2718RD Zoetermeer, The Netherlands