CYGNETT CY4058PPWIR PowerBase III 15W Wireless Charger User Manual
- June 8, 2024
- CYGNETT
Table of Contents
PowerBase III
15W Wireless Charger
USER MANUAL
CY4058PPWIR PowerBase III 15W Wireless Charger
A: Wireless output
B: USB-C connector
Product Specifications
| Name | PowerBase III 15W Wireless Charger |
|---|---|
| Item Number | CY4058PPWIR, CY4059PPWIR, CY406OPPWIR, CY4061PPWIR |
| USB-C Input | 5.0V-3.0A (15.0W), 9.0V-2.22A (20.0W), 12.0V-1.67A (20.0W) |
| Wireless Output | 5.0W, 7.5W, 10.0W, 15.0W (15.0W Max) |
| Total output | 15.0W Max |
| Working Frequency Band | 112-205kHz |
After evaluation, the product satisfied with RED Directive RF exposure
required while used 20cm away from the human body.
Max Output Power| -18.5dBpA/m@10m
FCC ID| 2AEDZCY40XXPPWIR
Installation instructions
Using the integrated USB-C cable, insert the USB-C connector (B) into a compatible USB-C charger (not included). Place your wireless charging device onto the wireless charging output (A) and your device should begin to wirelessly charge automatically. To achieve fast charging, please ensure you are using a charger that is capable of fast charging at least 20W. For optimum charge speed, adjust your device so that it is aligned to the centre of the wireless charging output. Please ensure that the case on your phone is not affecting the wireless charging by removing it and checking the performance. Some cases interfere with wireless charging if they contain metallic material or are overly thick.
FCC RF RADIATION EXPOSURE STATEMENT CAUTION
To maintain compliance with the FCC’s RF exposure guideline, place the product at least 20cm from nearby persons.
| Indicator Light | Status |
|---|---|
| Flashes 3 times and turns off | Powered on and on standby |
| Solid green | Wirelessly charging a device |
| Solid red | Fully charged a device |
| Flashing Red | Foreign object detected on wireless output |
Caution
Please read all warnings for your safety and optimal user experience. Please
read and follow these instructions carefully and retain for your records.
- Do not disassemble or throw into fire or water.
- Do not expose to extreme weather conditions.
- Do not use this product if you observe visible defects.
- Do not short circuit the product or store it in a receptacle where it may be short circuited by other metallic or conductive objects.
- Do not operate the product if it has been wet or otherwise damaged, to prevent against electric shock, explosion and/or injury
- Never attempt to dismantle the unit.
- Children should be supervised to ensure that they do not play with the product.
- Do not use if broken, damaged, or exposed to liquids.
- Not to be used in extremely high ambient temperatures.
- Do not use with damaged or faulty accessories.
- Do not place near any sources of heat, open flame or liquid.
- Do not place close to a magnetic strip or strip card as it could cause magnetic failure.
- Please keep charger a safe distance of at least 80cm from any implantable medial devices to avoid medical device interference.
- In the case of the device overheating, place disconnect immediately.
Please note that changes or modifications not expressly approved by the
party responsible for compliance could void the user’s authority to operate
the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to connect the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separate between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help.
Complies with IMDA Standards DA104966
Cygnett and the Cygnett logo are trademarks of Cygnett Pty Ltd. Other brands
and product names are trademarks or registered trademarks of their respective
holders. Made in China.
Cygnett Pty Ltd,
858 Lorimer St, Port Melbourne.
Victoria, 3207, Australia
Cygnett UK Limited, ”
71-75 Shelton St,
London, WC2H 9JQ
Cygnett USA Inc,
3838 W Carson St,
Ste 220, Torrance, CA 90503
Cygnett EU,
Office 2, Goudstraat 65,
2718RD Zoetermeer, The Netherlands