levenhuk Ermenrich Zing WT40 Voltage Tester User Manual

October 30, 2023
levenhuk

Ermenrich Zing WT40 Voltage Teste
User Manual

levenhuk Ermenrich Zing WT40 Voltage Tester - Cover

Ermenrich Zing WT40 Voltage Tester

  1. levenhuk Ermenrich Zing WT40 Voltage Tester - Product Overview 1Sensor
  2. Flashlight
  3. LED indicator
  4. Power/flashlight button
  5. Battery compartment

Getting started

  • Open the battery compartment (5) and insert 2 AAA batteries according to the correct polarity. Close the cover.
  • Press (4) to turn the device on/off.

Testing

Press (4) to turn the device on and then wait until the device emits a sound and the LED indicator (3) is steady green. This means that the device is ready to be used.

Using

Bring the sensor (1) to a cable, a wire or a socket. A low-pitched sound will be emitted and the LED indicator (3) will blink when it detects AC voltage in the 12­48V range. A high-pitched sound will be emitted and the LED indicator (3) will light up when it detects AC voltage in the 48­1000V range.

Note! Random beeps and flashes may occur due to detection of static charges.

Flashlight

Press (4) and hold for 3 seconds to turn the flashlight on/off.

**** If the light is dim, please replace the batteries.

Specifications

Type non-contact
Voltage measurement range (AC) 12–48V

48–1000V
Frequency range| 50–60Hz
Sound signal| +
Light signal| +
Device auto-off| 180 seconds
Overvoltage class| category III
Operating temperature range| –10…+50°C (operating), −20…+60°C (storage) / +14…+122°F (operating),
–4…+140°F (storage)
Power supply| 2pcs AAA batteries

The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

Care and maintenance

Always test the device prior to using it. Never assume neutral or ground wires are de-energized. Do not use the device if it is not working properly. Do not use the device in an intense electric field environment. Do not use the device to detect AC voltage on any shielded conductor. Do not touch any bare conductor with your hand or skin. Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local specialized service center. Protect the device from sudden impact and excessive mechanical force. Store the device in a dry cool place. Only use accessories and spare parts for this device that comply with the technical specifications. Never attempt to operate a damaged device or a device with damaged electrical parts! If a part of the device or battery is swallowed, seek medical attention immediately. Keep away from children.

Battery safety instructions

Always purchase the correct size and grade of battery most suitable for the intended use. Always replace the whole set of batteries at one time; taking care not to mix old and new ones, or batteries of different types. Clean the battery contacts and also those of the device prior to battery installation. Make sure the batteries are installed correctly with regard to polarity (+ and ­). Remove batteries from equipment that is not to be used for an extended period of time. Remove used batteries promptly. Never short-circuit batteries as this may lead to high temperatures, leakage, or explosion. Never heat batteries in order to revive them. Do not disassemble batteries. Remember to switch off devices afmer use. Keep batteries out of the reach of children, to avoid risk of ingestion, suffocation, or poisoning. Utilize used batteries as prescribed by your country’s laws.

Levenhuk International Lifetime Warranty

All Levenhuk telescopes, microscopes, binoculars, and other optical products, except for their accessories, carry a lifetime warranty against defects in materials and workmanship. A lifetime warranty is a guarantee on the lifetime of the product on the market. All Levenhuk accessories are warranted to be free of defects in materials and workmanship for six months from the purchase date. The warranty entitles you to the free repair or replacement of the Levenhuk product in any country where a Levenhuk ofkce is located if all the warranty conditions are met.
For further details, please visit: www.levenhuk.com/warranty If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.

Levenhuk Inc. (USA): 928 E 124th Ave. Ste D, Tampa, FL 33612,
USA, +1-813-468-3001, contact_us@levenhuk.com
Levenhuk Optics s.r.o. (Europe): V Chotejně 700/7, 102 00 Prague 102,
Czech Republic, +420 737-004-919, sales-info@levenhuk.cz
Levenhuk®, Ermenrich® are registered trademarks of Levenhuk, Inc.
© 2006–2023 Levenhuk, Inc. All rights reserved.
www.levenhuk.com
20230403

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals