BEDRUG HLJL182DRK Jeep JL Headliner Instruction Manual
- June 13, 2024
- BEDRUG
Table of Contents
BEDRUG HLJL182DRK Jeep JL Headliner
Product Information
The product is a Jeep JL Headliner, available in two variants: HLJL182DRK and HLJL184DRK. It comes with installation instructions and a limited warranty.
Product Usage Instructions
- Before installing, read all the instructions provided.
- While it is recommended to remove the hardtop, it is not required.
- Lay out the parts and check the placement of the individual panels to the corresponding position on the hardtop.
- Using a clean lint-free cloth, clean the attachment surface of the hardtop.
- For HLJL182DRK, remove the paper release liner from the areas shown to expose the adhesive.
- For HLJL184DRK, follow the same process of removing the paper and releasing the liner from the areas shown to expose the adhesive.
Please note that these instructions are based on the provided text extract from the user manual. For detailed and accurate installation guidance, refer to the complete user manual accompanying the product.
- Read all instructions before installing.
- Removal of the hardtop is recommended, but not required.
- Lay parts out to check the placement of the individual panels to the corresponding position on the hardtop.
- Using a clean lint-free cloth, clean the attachment surface of the hardtop using isopropyl alcohol. If the clothes become visibly soiled, replace them with clean ones.
- NOTE: THE ATTACHMENT SURFACE TEMPERATURE SHOULD BE 68°F OR HIGHER IN ORDER FOR THE ADHESIVE STRIPS TO ACHIEVE MAXIMUM ADHESION. ALSO, NEVER CONTAMINATE THE ADHESIVE BY TOUCHING IT WITH YOUR FINGERS.
- Beginning at one side of each headliner panel, remove the release liner from the adhesive strips and place the panel up to the hardtop. Press firmly to ensure all the adhesive strips are thoroughly attached to the hardtop.
- Repeat steps 3 through 5 for the remaining headliner panels.
- Reinstall the hardtop, if removed.
LIMITED WARRANTY
BedRug Inc. warrants products for Jeep vehicles for three years from the original date of purchase. The warranty is limited to the original purchaser and is not transferable. The product is warranted to be free from defects in materials and workmanship. The warranty is void if the product has been damaged by accident, unreasonable use, neglect, improper service/installation/removal, modifications, acts of God, normal wear and tear, or other causes not arising out of defective materials or workmanship. Consequential and incidental damages are not covered under this warranty.
The warranty does not cover labour, the cost of shipping, or the cost of returning the product for warranty service or inspection. The terms of this warranty may vary from state to state. You may have rights under specific state laws that differ from the terms of this warranty. Proof of purchase will be required for warranty service. The product should be cleaned before return. A return authorization number must be obtained prior to returning any product. For warranty instructions, returns, and packaging contact BedRug Inc. Customer Service at 800-462-8435.
PRODUCT REGISTRATION
Thank you for purchasing your BedRug product! We would appreciate it if you would take a few minutes to register your purchase. Registration allows us to provide, with your permission, important updates, service information, helpful hints or warranty service should you ever require technical support. BedRug offers the option of returning product registration forms electronically, rather than having to fill them out by hand. You can be assured that BedRug does not share or sell the information you provide. Save a copy of your sales receipt. Activate your warranty by registering your product online at http://www.bedrug.com/customer-service/product-registration.html or by scanning the QR code. You will need the 6-digit lot and date code found on the underside of the product, see the label example below.
