LaView LV-PWB5B-2PK B5 2K Wired Outdoor Security Camera User Guide
- June 5, 2024
- LaView
Table of Contents
LaView LV-PWB5B-2PK B5 2K Wired Outdoor Security Camera
PRODUCT FEATURES
WHAT’S IN THE B0X
PLEASE CONSULT THIS CHECKLIST FOR ALL PARTS.
RESET
Press and hold the reset button for 5 seconds to reset the device (Camera will
return to factory default settings followed by a welcome ringtone.) Wait until
the camera is beeping every 15 seconds which means the camera is ready for
pairing. If the camera is not beeping, reset the camera again.
LED INDICATOR
Slow Flashing Light: Initializing/ Ready for Wi-Fi setup Fast Flashing Light:
Currently connecting//Network Error Solid Light: Network is properly connected
APP SETUP
DOWNLOAD AND INSTALL APP
- LaView APP is available for both iOS and Android OS. Search the name LaView in APP Store or Google Play. (The other LaView apps, such as LaView Connect, LaView
- ONE, LaView Life do NOT support B5 camera)
- Please download the LaView APP from the App Store or Scan the QR Code below
- MAKE SURE YOUR PHONE IS CONNECTED TOA 2.4GHZ Wi-Fi NETWORK
- COMPLETE THE APP REGISTRATION PROCESS
- FOLLOW THE IN-APP INSTRUCTION TO PAIR THE CAMERA
- Click on the +’ sign to add the camera. Continue to click “Video Surveillance”> “Smart Camera”
- Connect the camera to power via included USB Charger ( If you are not setting up the camera for the very first time, press the Reset button instead for 5 seconds until you hear a sound.)
- Wait until the camera is beeping twice every 15 seconds, which means the camera is in stand-by status and ready for pairing
- Enter the Wi-Fi Password to generate a QR code that carries your Wi-Fi information
- Use the camera to scan the QR code on the phone (keep the camera 8-12 inches away from the phone)
- Press 1 Heard a Prompt’ after the camera receives the QR code and beeps. The camera will start pairing
- When connecting, you should make sure your router, mobile phone, and camera are as close as possible
- Wait until the camera is connected online
- Customize the camera name to differentiate cameras in different locations and finish paring process
- If the pairing is not successful, press the Reset button for 5 seconds until you hear a beep and start again. Or check the FAQ section for more troubleshooting steps
INSTALLATION
- Fix the mount base on the wall with included screws.
- Snap the magnetic mount onto the mount base and screw it clockwise to seal.
- Attach a 3M sticker to the magnetic mount. (Optional.
- Recommended when installed in high wind environment)
- Attach your camera to the magnetic mount and adjust the camera view angle. to To uninstall the mounting bracket, turn the magnetic mount counter-clockwise
TROUBLESHOOTING
IF YOU CANNOT CONNECT THE CAMERA TO THE INTERNET, CHECK THE FOLLOWING STEPS
- Ensure you are connecting to a 2.4GHz Wi-Fi not 5GHz
- Ensure Wi-Fi password or SSID is correct
- Ensure the camera is placed as close to the router as possbile
- Ensure the camera is powered on and is beeping twice every 15 seconds before scanning the QR code
- Ensure you are using the correct APP ( LaView)
- Ensure the camera is Scanning the QR code on the phorne in the correct way
- If the above doesn’t help, reset the camera and start pairing again
WHAT CANI DO IF THE CAMERA STOPPED WORKING?
- Close and restart the APP
- Check if Wi-Fi settings is changed. If so, please reset the camera
- Ensure the router is powered on and online
- Ensure the camera is powered on
- Ensure the router has decent network bandwidth
- Check the app is on the latest version
MOTION DETECTION
HOW TO TURN ON AND OFF MOTION DETECTION?
To turn on or off motion detection and Human detection setting, go to the
camera menu and click on Detection Alarm Settings
WHAT CAN I DO IF I FI CANNOT RECEIVE NOTIFICATIONS?
- Ensure your phone notification setting is enabled for LaVievw APP
- Ensure the phone has a decent network
- Ensure the camera is online
WHAT CAN I DO IF I RECEIVE TOO MANY NOTIFICATIONS?
If the camera is placed at a location with heavy traffic, we recommend you relocate it to a place with less traffic to receive fewer alerts Objects with human body shape such as stuffed toys may be detected as human and trigger the alerts, remove those if they constantly show up in the camera
WHAT CANI DO IF THE IMAGE IS NOT CLEAR?
The camera is equipped with 2K Full HD lens and sensor to produce a superior image, however, the image quality may be affected by the lighting condition Ensure the camera is NOT facing to the environment with poor lighting conditions or with extremely high contrast. Ensure it is NOT facing directly to bright lighting source such as sunlight Ensure your phone and your router has enough bandwidth to stream HD video. A minimum of 2MBps is required to stream each 2K camera. If the network does not meet this requirement, the Live-view stream will be downgraded to SD automatically
NIGHT VISION
The camera is equipped with Infrared LED technology to capture black and white night vision images in detail at night. However, the night vision image quality may be affected by the following factor There are high contrast light sources such as car headlight pointing to the camera BS is equipped with a starlight sensor and Infrared LEDS to offer 4 night vision modes
Infrared Mode: LED emits Infrared light and produces a black and white image at night. Works in pitch black
Color Night Vision (Spotlight off): Produce starlight grade color night vision, but requires some ambient lighting such as street lights
Color Night Vision (Spotlight on): Produce full-color night vision even in pitch black conditions
Smart Mode : Image set in black & white night vision but switch to color night vision mode automatically when a motion is detected
WATERPROOF AND OUTDOOR USE
The camera is IP65 rated for totally dust tight and protection against low- pressure jets of directed water from any angle. The camera can operate between 14°F- 122 °F for all weather use. We recommend placing the camera under the eave and avoiding heavy rain or snow to maximize the camera life span For more technical questions or tutorials such as Alexa setup, and Cloud Storage setting, please follow the in-APP tutorial section in the LaView APP or visit Our Youtube tutorials We proudly offer a 1-year warranty on all of our products. This warranty extends to the original purchaser only and is non- transferable f you wish to return a product within the return period, please message us directly in vour Amazon accOunt o on our website
FCC COMPLIANCE
This device complies with Part 15 of the FCC Rules. Operation is subject to the Following two conditions:
- this device may not cause harmful interference,
- this device must accept any interference received, including interference that may cause undesired operation.
The manufacturer is not responsible for any radio or tv interference caused by modifications or changes to this equipment. Such modicduO the change could void the user’s authority to operate the equipment. his equipment has been tested and found to comply with the limits for a Class Britt devises, pursuant to part 0 the are designed to provide reasonable protection against harmful interference in a residential Installation. The equipment generates, uses and can radiate radio frequency energy and, not installed and used in accordance with the instructions, may cause narmrut interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Ir this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
RF warning statement:
To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20 cm between the radiator and your body.
CUSTOMER SERVICE
PARAMETER
IR Distance| mt
lens| 3.6mm
Day & Night| IRCut Filterwitn Auto Switch
Processor| High-Performance Embedded SOCProcessor
Wireless| Built-in 2.4GWi·Fi
Input| Built-in Omni-direction Microphone
Output| Built-inLoudspeaker
C ression Standard| H.265
Max. Resolution| 2560×1440
Fr.ime Rate| 20fps
WDR| DWDR
Cloud Storage| L.aview Cloud Storage
local Storage| Micro SDCard ( Max.128G)
PIR| PIR Motion Sensor
Operating Conditions| 14’F-112°F(-10’C-so·c )Humidity95%
or Less (non-condensing)
Power Supply| SVDC. lA
Power Consumption| Max.SW
Ingress Protection| IP65
PRODUCT WARRANTY CARD
Your LaView product is protected by a 1-year warranty from the. purchase date. For more information on repairs, exchanges, and other policies, please visit www.laviewusa.com. Please send all inquiries through the Contact Form on our website, or email us at info@laviewusa.com. And our technicians would be glad to assist you.