levenhuk SN70 Wezzer Sauna Thermometer User Manual

: October 30, 2023
: levenhuk

Table of Contents

Parts overview and screen interface
Getting started
Thermometer functions
Thermometer calibration
Reset
Specifications
Care and maintenance
Levenhuk International Lifetime Warranty
Customer Support
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

levenhuk SN70 Wezzer Sauna Thermometer

levenhuk SN70 Wezzer Sauna Thermometer

Parts overview and screen interface

Temperature (wired probe 1)
Temperature (wired probe 2)
Calendar
Time display
SET button
UP button
DOWN button
CONFIRM button
Wall mount hole
Table stand (foldout)
Output (probe)
Power input

Caution! Please remember that mains voltage in most European countries is 220–240V. If you want to use your device in a country with a different mains voltage standard, remember that use of a converter is absolutely necessary.

Getting started

Connect the power cable to the device and the DC adapter (not included) via a USB plug and connect to the AC power supply.
Extend the wired probe into the sauna room to measure the temperature there. Attention! The main unit should be installed in a place at which a maximum temperature of +80°C is not exceeded.

Thermometer functions

Press the SET button and hold it for 3 seconds. Highlight the desired menu item by scrolling up (UP button) or down (DOWN button). Select the highlighted item by pressing the CONFIRM button. Press UP or DOWN to change the value, and then press the CONFIRM button to save the settings.
In the menu, you can set the date and time, set the limits of the upper and lower temperature, and switch the alarm on or off.

Thermometer calibration

Press the UP and DOWN buttons simultaneously and hold them for 3 seconds. Then, press the CONFIRM button to calibrate the device manually. Press UP or DOWN to change the value, and then press the CONFIRM button to save the settings.

Reset

Press the UP and DOWN buttons simultaneously and hold them for 3 seconds. Press the DOWN button, and then press the CONFIRM button to reset the device to the default settings. Press UP or DOWN to change the value, and then press the CONFIRM button to save the settings.

Specifications

Temperature, units of measurement	°C
Operating temperature range (wired probe 1)	–40… +125°C
Operating temperature range (wired probe 2)	–40… +125°C
Probe length, m	5
Power supply	AC/DC adapter 5V 1000mA

The manufacturer reserves the right to make changes to the product range and specifications without prior notice.

Care and maintenance

The base station should be placed in a room within the manufacturer’s recommended humidity and temperature ranges. Take the necessary precautions when using the device with children or others who have not read or who do not fully understand these instructions. Do not try to disassemble the device on your own for any reason. For repairs and cleaning of any kind, please contact your local specialized service center. Protect the device from sudden impact and excessive mechanical force. Store the device in a dry cool place. Only use accessories and spare parts for this device that comply with the technical specifications. Never attempt to operate a damaged device or a device with damaged electrical parts! If a part of the device or battery is swallowed, seek medical attention immediately. Children should use the device under adult supervision only.

Levenhuk International Lifetime Warranty

All Levenhuk telescopes, microscopes, binoculars, and other optical products, except for their accessories, carry a lifetime warranty against defects in materials and workmanship. A lifetime warranty is a guarantee on the lifetime of the product on the market. All Levenhuk accessories are warranted to be free of defects in materials and workmanship for six months from the purchase date. The warranty entitles you to the free repair or replacement of the Levenhuk product in any country where a Levenhuk office is located if all the warranty conditions are met.

For further details, please visit: www.levenhuk.com/warranty
If warranty problems arise, or if you need assistance in using your product, contact the local Levenhuk branch.

Customer Support

Levenhuk Inc. (USA): 928 E 124th Ave. Ste D, Tampa, FL 33612,
USA, +1-813-468-3001, contact_us@levenhuk.com
Levenhuk Optics s.r.o. (Europe): V Chotejně 700/7, 102 00 Prague 102,
Czech Republic, +420 737-004-919, sales-info@levenhuk.cz
Levenhuk®, Wezzer® are registered trademarks of Levenhuk, Inc.
© 2006–2023 Levenhuk, Inc. All rights reserved.
www.levenhuk.com
20221201