MIBOXER FUT092 4-Zone RGB+CCT Remote User Manual
- June 10, 2024
- MiBOXER
Table of Contents
MIBOXER FUT092 4-Zone RGB+CCT Remote
Features
The product adopt worldwide used 2.4GHz frequency, GFSK control method, with the features of low power consumption, long-distance transmitting, strong anti-interference and fast communication rate. Adopt high-precision touching IC Touching is more stable and sensitive, can control specified Mi-Light / MiBoxer smart light with color, color temperature, saturation and brightness changes.
Products Key Diagram
- Long press “Master OFF” or “Zone OFF” to night light mode.
- Touch “Color Temperature Line” to white light mode and adjust color temperature.
- Touch “Color Ring” to change the colors.
- Press “Speed +” to accelerate the dynamic mode speed continously until to fastest speed.
- Press “Speed -” to lower the dynamic mode speed continously until to lowest speed.
Linking Code / Unlinking Code Instructions
_ Remark: _The light can be working after linking with the remote.
Linking Code Instructions
- Switch off light, after 10 seconds then switch on again.
- Short press the” ” button 3 times within 3 seconds when light is on.
- Lights blink 3 times slowly means linking is done successfully.
Warning: Linking failed if light is not blinking slowly, Please follow above steps again.
( Note: Light that have linked can’t link again)
Unlinking Code Instructions
- Switch off light, after 10 seconds then switch on again.
- Short press ” ” button 5 times within 3 seconds when light on.
- Unlinking must be the same zone with the Linking
- Lights blink 10 times quickly means unblinking is done successfully.
Warning: Unlinking failed if light is not blinking quickly, Please follow above steps again.
( _ Note: _Light haven’t linked that don’t need to unlink)
Grouping of several lights
You can add an endless number of lights to a zone on the 4 channel remote by linking the lights to different zones. This way you are completely flexible in creating different group combinations. Below you can see some grouping examples.
Remark
- The user can re-programme freely as needed. One remote can control countless lamps or controllers, but one lamp or controller can only be controlled by four remotes (Max).
- Please check the battery installation and controller (totally discharge the power), when you program after switching off and switching on.
Precautions
Attention
- This remote only control specified Mi-Light / Miboxer products; not all Mi-Light / Miboxer series can work on this remote.
- In the using of the remote, if the indicated lamp blinking quickly, Please change the battery in time. Please don’t use poor quality battery to avoid the leaking of battery liquid to damage the remote.
- This 2.4GHz remote is precise electronic product; don’t use it in humid, high temperature, dust and high voltage environment; Saving it at indoor, dry and no static electricity environment.
- Please don’t use the remote on the wide-range metal or strong electromagnetic wave area, otherwise, it will badly affect the controlling distance.
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>