cameo CLX3D Exhibition Lamp with Daylight LEDs User Manual

: June 10, 2024
: cameo

cameo CLX3D Exhibition Lamp with Daylight LEDs

Product Information

X3 D Exhibition Lamp with Daylight LEDs CLX3D

The X3 D Exhibition Lamp is a high-quality product that has been designed and manufactured to ensure optimal performance and durability. This product features daylight LEDs that provide bright and natural lighting for exhibitions, displays, and other indoor applications.

Product Usage Instructions

Before using the X3 D Exhibition Lamp, carefully read and understand all the safety instructions and definitions provided in the user manual.
Make sure that the packaging contents are complete, and all the required accessories are included.
Connect the lamp to a power source using the appropriate power cable and plug.
Use the operating and display elements to adjust the lamp’s settings according to your requirements.
If required, fit the diffuser or sash limiter to the lamp as per the instructions provided in the user manual.
Ensure that the minimum distance to illuminated surfaces and normally flammable materials is maintained as per the technical data provided in the user manual.
For optional accessories, refer to the user manual for instructions on how to install and use them.
Regularly clean and maintain the X3 D Exhibition Lamp to ensure optimal performance and longevity.
Refer to the user manual for disposal instructions and manufacturer’s declarations.
For DMX control, refer to the section provided in the user manual for detailed instructions.

YOU HAVE MADE THE RIGHT CHOICE!
This device has been developed and manufactured to the highest quality standards to ensure many years of problem-free operation. Please read this user manual carefully to be able to use your new Cameo product quickly and optimally. Further information about Cameo Light is availab-le on our website CAMEOLIGHT.COM.

INFORMATION ON THIS USER MANUAL

Carefully read the safety instructions and the entire manual before operating the device.
Observe the warnings on the device and in the user manual.
Always keep the user manual within reach.
If you sell or pass on the device, it is important that you also include this user manual, as it is an integral part of the product.

INTENDED USE
The product is a device for event technology!
This product has been developed for professional use in the field of event technology and is not suitable for use as domestic lighting!
Furthermore, this product is only intended for qualified users with specialist knowledge of event technology!
Use of the product outside the specified technical data and operating conditions is considered improper use!
Liability for damage and third-party damage to persons and property due to inappropriate use is excluded!

The product is not suitable for:

Use by persons (including children) with limited physical, sensory or mental abilities or lack of experience and knowledge.
Children (children must be instructed not to play with the device).

DEFINITIONS AND SYMBOL EXPLANATIONS

DANGER: The word DANGER, possibly in combination with a symbol, indicates immediately dangerous situations or conditions for life and limb.
WARNING: The word WARNING, possibly in combination with a symbol, indicates potentially dangerous situations or conditions for life and limb.
CAUTION: The word CAUTION, possibly in combination with a symbol, is used to indicate situa-tions or conditions that may lead to injury.
ATTENTION: The word ATTENTION, possibly in combination with a symbol, refers to situations or states that can lead to damage to property and/or the environment.

This symbol identifies hazards that can cause electric shock.

This symbol identifies hazardous areas or hazardous situations.

This symbol indicates hazards caused by hot surfaces.

This symbol indicates hazards caused by intense light sources.

This symbol denotes a device that does not contain any user-serviceable parts.

This symbol indicates additional information on the operation of the product.

SAFETY INSTRUCTIONS

HAZARD:

Do not open the device and do not perform any modifications.
If your device no longer functions properly, if liquids or objects get inside it or if it has been damaged in any other way, switch it off immediately and disconnect it from the mains. The device may be repaired only by authorised repair technicians.
For devices of protection class 1, the protective conductor must be connected correctly. Never disconnect the protective conductor. Devices of protection class 2 do not have a protective conductor.
Ensure that live cables are not kinked or otherwise mechanically damaged.
Never bypass the device fuse.

WARNING:

The device may not be operated if it shows obvious signs of damage.
The device may only be installed in a voltage-free state.
If the device’s power cable is damaged, the device may not be used.
Permanently connected power cables may only be replaced by a qualified person.

ATTENTION:

Do not switch on the device if it has been exposed to extreme temperature fluctuations (for example, following transport). Moisture and condensation can damage the device. Switch on the device only when it has reached room temperature.
Ensure that the voltage and frequency of the mains supply match the values specified on the device. If the device has a voltage selector switch, do not connect the device until it has been set correctly. Use only suitable power cables.
To disconnect the device from the mains on all poles, it is not sufficient to press the on/off switch on the device.
Make sure that the fuse used corresponds to the type printed on the device.
Ensure that suitable measures have been taken against overvoltage (e.g. lightning strikes).
Observe the specified maximum output current on devices with a Power Out connection. Ensure that the total current consumption of all connected devices does not exceed the specified value.
Replace plug-in power cables with original cables only.

HAZARD:

Danger of suffocation! Plastic bags and small parts must be kept out of reach of persons (including children) with reduced physical, sensory or mental capabilities.
Danger from falling down! Make sure that the device is securely installed and will not fall down. Only use suitable stands or mounts (particularly for fixed installa-tions). Ensure that accessories are properly installed and secured. Ensure that applicable safety regulations are observed.

WARNING:

Use the device in the prescribed manner only.
Operate the device using only accessories of the type recommended and supplied by the manufacturer.
Observe safety regulations applicable in your country during installation.
After connecting the device, ensure that all cables are routed so as to avoid dama-ge or accidents, such as from tripping.
Always observe the specified minimum distance to normally flammable materials!Unless explicitly stated, the minimum distance is 0.3 m.

CAUTION:

Moving components such as mounting brackets or other movable components may become jammed.
In the case of devices with motor-driven components, there is a risk of injury due to the movement of the device. Sudden device movement can cause shockreactions.
The housing surface of the device can become very hot during regular operation. Ensure that accidental touching of the housing is not possible. Always allow the lamp to cool sufficiently before removal, maintenance work and charging etc.

ATTENTION:

Do not install or use the device in the vicinity of radiators, accumulators, stoves, or other heat sources. Ensure that the device is always installed in such a way that it is sufficiently cooled and cannot overheat.
Do not place any ignition sources, such as burning candles, near the device.
Ventilation openings must not be covered and fans must not be blocked.
For transport, use the original packaging or packaging provided by the manufacturer.
Avoid any impacts to or shaking of the device.
Observe the IP rating and the ambient conditions such as temperature and humidity according to the specifications.
Devices can be continuously further developed. In the event of deviating information on operating conditions, performance or other device properties between the user manual and the device labelling, the information on the device always takes priority.
The device is not suitable for tropical climate zones or for operation over 2,000 m above sea level.
Unless explicitly stated, the device is not suitable for operation under marine conditions.

PLEASE NOTE:
For conversion or retrofit sets or accessories provided by the manufacturer, it is essential to observe the instructions included.

CAUTION! IMPORTANT INFORMATION REGARDING LIGHTING PRODUCTS!

Never look directly into the beam of light, not even for a short period of time.
Never look into the beam of light using optical devices such as a magnifying glass.
Stroboscopic effects may cause epileptic seizures in susceptible individuals!
Permanently installed lamps are built into these lighting units. These may not be replaced by the user. The lamps contained in this lighting unit may only be replaced by the manufacturer, its service partner, or a similarly qualified person.

NOTES FOR MOBILE INDOOR DEVICES

Temporary operation! Event equipment is generally only designed for temporary operation.
Continuous operation or permanent installation can impair the functioning of the device and cause premature ageing.

PACKAGING CONTENT

Remove the product from the packaging and remove all packaging material.
Please check the completeness and integrity of the delivery and notify your distribution partner immediately after purchase if the delivery is not complete or if it is damaged.

The packaging includes:

1 x Cameo X3D Spotlight
1x power cable
User manual

INTRODUCTION

LED PAR with 31 x 15 W Daylight LEDs CLX3D

CONTROL FUNCTIONS:

1 CH, 2 CH 16 bit, 4 CH 16 bit DMX control
Master/slave operation
Standalone operation

FEATURES

31 x 15 W Daylight LEDs. DMX512. 5-pin DMX connectors. Quicklight via rotary- push encoder. Operating voltage: 100–240 V AC.

The spotlight features the RDM standard (Remote Device Management). This remote device management enables the status query and configuration of RDM end devices via an RDM-capable controller, such as the optionally available Cameo UNICON (item number CLIREMOTE).
The Cameo UNICON also allows access to the entire fixture menu.

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS

POWER IN
TRUE1-compatible mains input socket. Operating voltage 100–240 V AC/50–60 Hz. A suitable mains cable with TRUE1 compatible plug is included.
POWER OUT
TRUE1-compatible mains output socket. Facilitates power supply to other CAMEO spotlights. Ensure that the total power consumption of all devices connected to the device does not exceed the given ampere (A) value.
FUSE
for 5 x 20 mm fuses. IMPORTANT NOTE: Replace the fuse only with one of the same type and rating. In the event of repeated fuse failure, please contact an authorised service centre.
DMX IN
Male 5-pin XLR socket for connection to a DMX control device (e.g. DMX console).
DMX OUT
Female 5-pin XLR socket for sending the DMX control signal.
OLED DISPLAY
The OLED display shows the currently activated operating mode (main display), the menu items in the menu and the numerical value or operating status in the corresponding menu items. If there is no input for approx. 30 seconds, the display automatically returns to the main display. Note on the main display in the operating modes with external control: As soon as the control signal is interrupted, the characters in the display start flashing; if the control signal is present again, the flashing stops.
ROTARY-PUSH ENCODER
Use the rotary-push encoder to navigate in the unit menu and configure the spotlight:
Open the main menu: Press encoder
select (sub)menu item: Rotate encoder
open (sub)menu item: Press encoder
Change value or status: Turn encoder
Confirm change: Press encoder
Exit menu level: Select and confirm the arrow symbol

SECURING LUG
One safety eyelet each for securing the headlamp when mounted overhead is located on the top and bottom of the headlamp.

OPERATION

PLEASE NOTE

As soon as the spotlight is correctly connected to the power supply, the following are displayed in succession: “Update wait …” (for service purposes only), “Welcome to Cameo”, the model name and the software version. After this process, the spotlight is ready for operation and the previously activated operating mode is launched.
The main display is activated automatically if no input is made within approximately 30 seconds.
If one of the DMX operating modes is activated and there is no DMX signal at the DMX input, the characters in the display start flashing. Turning the encoder now activates the Quicklight mode and you can set the brightness from 000 to 255 as desired.

MAIN DISPLAY
The main display shows the currently activated mode (in the example DMX mode with DMX start address 001).

SETTING DMX START ADDRESS (DMX address)
Starting from the main display, press the encoder to enter the main menu. Now select the menu item DMX Address and confirm. Set the desired DMX start address and confirm the entry (hig-hest value depends on the currently set DMX operating mode).

CONFIGURING DMX MODE (DMX Mode)
Starting from the main display, press the encoder to enter the main menu. Now select the menu item DMX Mode and confirm. Select the desired DMX operating mode and confirm the selection. Tables with the channel assignments can be found in these instructions under DMX CONTROL.

STATIC STANDALONE MODE
The stand-alone operating mode Static makes it possible to set the dimmer and strobe directly on the unit, similar to using a DMX control unit. In this way, an individual scene can be created without an additional DMX controller.
Starting from the main display, press the encoder to enter the main menu. Now select the Stand Alone menu item, confirm, then select Static and confirm again. Now select the menu item you wish to edit and confirm. Set the desired value and confirm the entry. The values for the strobe effect correspond to the values in channel 3 of the DMX table 4 CH 16 bit.

cameo-CLX3D-Exhibition-Lamp-with-Daylight-LEDs-7

AUTO STANDALONE MODE
Adjust brightness (dimmer), speed (speed) and fade time (fade) as desired.
Starting from the main display, press the encoder to enter the main menu. Now select the Stand Alone menu item, confirm, then select Auto and confirm again. Now select the menu item you wish to edit and confirm. Set the desired value and confirm the entry.

cameo-CLX3D-Exhibition-Lamp-with-Daylight-LEDs-8

TIMER FUNCTION

The timer function allows the standalone mode Static to be timer controlled in such a way that the fade-in time can be set from 0 to 60 minutes, the dwell time from 1 to 24 hours and the fade-out time from 0 to 60 minutes. Time control starts immediately after activating the timer function in the previously activated standalone mode and remains active even if the spotlight is switched off and restarted.

Starting from the main display, press the encoder to enter the main menu. Select the Stand Alonemenu item, confirm, then select Timer and confirm again. Now select Fade In, Dwell Time or Fade Out for the individual settings and confirm. A number field is shown in the display in each case and you can set the value as desired from 1 to 60 or 1 to 24 by turning the encoder. Confirm again. Once all settings have been made as desired, activate the timer function by selecting the Timer On/Off sub-menu item, confirm, select On and confirm again (to deactivate the timer func-tion, please select Off and confirm).

cameo-CLX3D-Exhibition-Lamp-with-Daylight-LEDs-9

Note: The timer function is suitable for use in master/slave operation via cable.

SLAVE MODE
Starting from the main display, press the encoder to enter the main menu. Select the Slave menu item and confirm the selection. Connect the slave and the master unit (same model, same software version) using a DMX cable and activate one of the stand-alone modes (Static, Auto) in the master unit. The slave unit will now follow the master unit.

SYSTEM SETTINGS (Settings)

Ausgehend von der Hauptanzeige gelangen Sie durch Drücken auf den Encoder in das Hauptmenü. Select the Settings menu item and confirm the selection.

This will take you to the submenu for setting the submenu items. See table (rotate the encoder to select and push the encoder to confirm selection, change value or status by rotating, confirm by pressing encoder.

Settings

Display Reverse| =| Rotate display| OFF| No display rotation
ON| Display is rotated by 180° (e.g. for over- head installation)
Display Off Timer| =| Display lighting| Off after 20s| Deactivates after approximately 20 se- conds of inactivity
Always On| On permanently
DMX fail| =| Operational status with DMX signal fault| Hold| Last command is retained
or blackout,| Activates blackout
Full| Full On = maximum brightness
Standa- lone| Stand Alone Mode Static is activated
Dimmer curve| =| Dimmer curve| Linear| Light intensity increases linearly with DMX value
Exponen- tial| Light intensity can be finely adjusted at lower DMX values and broadly adjusted at higher DMX values
Logarith- mic| Light intensity can be broadly adjusted at lower DMX values and finely adjusted at higher DMX values
S-curve| Light intensity can be finely adjusted at lower and higher DMX values and broadly adjusted at medium DMX values
Dimmer response| =| Dimmer response| LED| Light responds abruptly to changes in DMX value
Dimmer response| =| Dimmer response| Halogen| Light behaves like a halogen spotlight with slight brightness changes
---|---|---|---|---
PWM Fre-

quency

| =| LED PWM frequency| 650Hz,

1530Hz,

3600Hz,

12000Hz,

18900Hz,

25000Hz

SYSTEM INFORMATION (System Info)
Starting from the main display, press the encoder to enter the main menu. Select the System Info menu item and confirm the selection.

This will take you to the submenu for accessing the system information (see table):

System Info

Time xx:xxh

| Display of the unit operating time in

hours and minutes

LED Operation

Time xx:xxh

| Display of LED operating time in hours

and minutes

Service Time| Display of the unit operating time since the last reset of the service timer in

hours and minutes

INSTALLATION

DANGER: Overhead mounting requires extensive experience, including the calculation of the load limit values of the installation material and regular safety inspection of all installation materials and spotlights. If you do not have these qualifications, do not attempt to perform an installation yourself. Refer instead to a qualified professional. There is a risk that devices that are incorrectly mounted and secured may come loose and fall down. This can cause serious injury or death.

Mount a suitable truss clamp directly on the U-bracket (fig. A). An optionally available Omega bracket can also be attached to the U-bracket (Fig. B). Installation on a truss is possible with a truss clamp. Suitable truss clamps are optionally available.
Loosen the two clamping levers on the sides of the spotlight (fig. C) to adjust the beam direction on a vertical plane and tighten the two clamping levers again after adjustment.
Always ensure firm connections and secure the headlamp with a suitable safety rope, depending on the situation, to the safety eyelet on the top or bottom of the headlamp (Fig. D).

FITTING THE DIFFUSER OR SASH LIMITER
To mount an optionally available diffusing lens (or wing limiter), press the spring-loaded locking pin on the top of the headlamp (fig. A). The holder now automatically folds upwards (Fig. B). Slide the diffuser (or sash limiter) from above into the grooves of the side and bottom brackets.

cameo-CLX3D-Exhibition-Lamp-with-Daylight-LEDs-14

Now fold the spring-loaded bracket on the top of the headlamp back down, making sure that the locking pin engages correctly.

OPTIONAL ACCESSORIES

cameo-CLX3D-Exhibition-Lamp-with-Daylight-LEDs-15

CARE, MAINTENANCE AND REPAIR

In order to ensure the long-term, proper functioning of the device, it must be regularly cleaned and, if necessary, maintained. The maintenance requirement depends on the intensity of use and the environment in which it is used.
We generally recommend a visual inspection before each operation. Furthermore, we recommend carrying out all the applicable maintenance measures specified below once every 500 operating hours or, in the case of a lower intensity of use, at the latest after one year. Warranty claims may be limited in the event of defects resulting from inadequate maintenance.

CARE (carried out by user)

WARNING! Before carrying out any care or maintenance, the power supply – and, if possible, all device connections – must be disconnected.

PLEASE NOTE! Improper care can lead to impairment of the device or even its destruction.

Housing surfaces must be cleaned with a clean, damp cloth. Make sure that no moisture can penetrate the device.
Air inlets and outlets must be regularly cleaned of dust and dirt. If compressed air is used, make sure that damage to the device is prevented (e.g. fans must be blocked in this case).
Lines and plug contacts must be cleaned regularly and dust and dirt must be removed.
In general, no cleaning agents or abrasive agents may be used, otherwise the surface finish may be damaged.
Devices must generally be stored dry and protected from dust and dirt.

MAINTENANCE AND REPAIR (by qualified personnel only)

HAZARD! There are live components in the device. Even after disconnecting the mains connection, there may still be residual voltage in the device, for example, due to charged capacitors.

PLEASE NOTE!

There are no user-serviceable assemblies in the device.
Maintenance and repair work may only be carried out by qualified specialist personnel authorised by the manufacturer. If in doubt, consult the manufacturer.
Improperly performed maintenance work may affect warranty claims.

DIMENSIONS (mm)

cameo-CLX3D-Exhibition-Lamp-with-Daylight-LEDs-16

TECHNICAL DATA

cameo-CLX3D-Exhibition-Lamp-with-Daylight-LEDs-19

MINIMUM DISTANCE TO ILLUMINATED SURFACE

This symbol with distance specification in metres (m) indicates the minimum distance between the light head and the illuminated surface. In this example, the distance is 0.5 m. Please refer to the technical data in this manual and the imprint on the unit casing for the value valid for this unit!

MINIMUM DISTANCE TO NORMALLY FLAMMABLE MATERIALS

This symbol with distance specification in metres (m) indicates the minimum distance between the light head and normally flammable materials. In this example, the distance is 0.5 m. For the value valid for this unit, please refer to the technical data in this manual!

DISPOSAL

PACKAGING:

Packaging can be fed into the reusable material cycle using the usual disposal methods.
Please separate the packaging in accordance with the disposal laws and recicling regulations in your country.

DEVICE:

This device is subject to the European Directive on Waste Electrical and Electronic
Equipment, as amended. WEEE Directive Waste Electrical and Electronic Equipment.
Old appliances do not belong in household waste. The old device must be disposed of via an approved disposal company or a municipal disposal facility.
Please observe the applicable regulations in your country!
Observe all disposal laws applicable in your country.
As a private customer, you can obtain information on environmentally-friendly diposal options from the seller of the product or the appropriate regional authorties.

MANUFACTURER’S DECLARATIONS
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
Adam Hall GmbH, Adam-Hall-Str. 1, 61267 Neu Anspach, Germany / E-mail Info@adamhall.com / +49 (0)6081 / 9419-0.
Our current warranty conditions and limitation of liability can be found at: https://cdn-shop.adamhall.com/media/pdf/Manufacturers-Declarations- CAMEO_DE_EN_ES_FR.pdf Contact your distribution partner for service.

UKCA- CONFORMITY
Hereby, Adam Hall Ltd. declares that this product meets the following guidelines (where applicable)
Electrical Equipment (Safety) Regulations 2016
Electromagnetic Compatibility Regulations 2016 (SI 2016/1091)
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulation 2012 (SI 2012/3032)
Radio Equipment Regulations 201 7(SI 2016/2015)

UKCA- DECLARATION OF CONFORMITY
Products that are subject to Electrical Equipment(Safety)Regulation 2016, EMC Regulation 2016 or
RoHS Regulation can be requested at info@adamhall.com.
Products that are subject to the Radio Equipments Regulations 2017 (SI2017/1206) can be downloaded from www.adamhall.com/compliance/

Subject to misprints and errors, as well as technical or other modifications!