Kensington PocketMouse Max Mouse User Manual

Kensington PocketMouse Max Mouse

PocketMouse Mini Wireless Manual

Plugging In Your Device

• You can use the free Kensington MouseWorks® software to program your buttons, adjust acceleration control, or even to set a reminder to take a break.
• Get the latest and most updated version of MouseWorks®which includes bug fixes, updates and the latest peripheral support our Website: www.software.kensington.com

Battery Installation

• Remove top case (battery cover) and insert batteries. To remove top case, push down (1) and slide the case back (2).
• To save battery power, turn off the mouse when not in use by pressing the scroll wheel button and the mouse connect button at the same time. Repeat to turn mouse back on.

Note: The mouse goes into standby mode after several minutes of inactivity. This extends the battery life of the mouse. To wake the mouse up again, simply click any button.

Wireless Installation

To establish a wireless connection, press the connect button on the receiver

1. Then, press the connect button on the bottom of the mouse
2. Repeat this procedure when replacing the batteries.

IMPORTANT: This wireless device is similar to an FM radio, by adjusting the antenna you can get better reception. You may also want to experiment with different locations and positions of the receiver.

Common Troubleshooting Steps

1. Plug and re-plug the mouse.
2. Test the device on another computer.
3. Some surfaces may “trick” the optical sensor, such as high gloss wood, and reflective surfaces like glass or mirrors. The ideal surface is a bright white surface (such as a piece of paper).
4. If you would like to program buttons, adjust acceleration control or set a rest reminder, please visit www.software.kensington.com to download the latest MouseWorks® software.
5. To establish a wireless connection, see the instructions on Page 3
6. To save battery power, turn off the mouse when not in use by pressing the scroll wheel button and the mouse connect button at the same time.
7. If you are having trouble with the battery cover case, please see the instructions on Page 2.

Comfort Guidelines

Please visit HealthyComputing.com for very important safety tips when using this device.

healthycomputing.com

Visit for free information on computer ergonomics.

Important: Computer User Health Information

• In recent years, medical attention on occupational injuries has identified normal, seemingly harmless activities as a potential cause of a wide range of problems collectively known as Repetitive Stress Injuries (RSI) or Cumulative Trauma
• Disorders (CTD). It is now recognized that any repetitive motion may contribute to these health problems. As a computer user, you might also be at risk.
• By paying attention to the way you perform your work, use your computer and phone, play sports, and work around the house, you can identify the behaviors that may be putting you at risk. If you experience pain, swelling, numbness, or weakness in your wrists or hands (especially during sleep), see your physician immediately. These symptoms could mean that you are developing a  repetitive stress injury that requires prompt medical attention. For more detailed information, consult your doctor, at www.HealthyComputing.com or a reputable book.

Technical Support

In North America, technical support is available to all registered users of Kensington products. There is no charge for technical support except long distance charges where applicable.

Technical Support Tips

1. You may find the answer to your problem in the Frequently Asked Questions (FAQ) section of the Support area on the Kensington Web site: www.support.kensington.com
2. Call from a phone where you have access to your computer.
3. Be prepared to provide the following information:
4. Name, address, and telephone number
5. The name of the Kensington product
6. Make and model of your computer
7. Your system software and version
8. Symptoms of the problem and what led to them

Warranty Information

1-Year Warranty

• KENSINGTON TECHNOLOGY GROUP (“KENSINGTON” warrants this PRODUCT against defects in material and workmanship under normal use and service for one year from the original date of purchase. KENSINGTON, at its option, shall repair or replace the defective unit covered by this warranty. Please retain the dated sales receipt as evidence of the date of purchase. You will need it for any warranty service.
• To keep this warranty in effect, the product must have been handled and used as prescribed in the instructions accompanying this warranty. This warranty does not cover any damage due to accident, misuse, abuse, or negligence. This warranty is valid only if the product is used on the computer or system specified on the product box. Please check product box for details or call technical support.
• Repair or replacement, as provided under this warranty, is your exclusive remedy.
• KENSINGTON shall not be liable for any incidental or consequential damages. Implied warranties of merchantability and fitness for a particular purpose on this product are limited in duration to the duration of this warranty.
• Some states/countries do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. Some states/countries do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from state to state and country to country.

Federal Communications Commission Radio Frequency Interference Statement

Note: The Kensington PocketMouse Mini Wireless has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

• However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
• MODIFICATIONS: Modifications not expressly approved by Kensington may void the user’s authority to operate the device under FCC regulations and must not be made.
• SHIELDED CABLES: To meet FCC requirements, all connections to equipment using a Kensington input device should be made using only the shielded cable provided.
• Declaration of Conformity Compliance Statement for the Kensington PocketMouse
• The Kensington PocketMouse Mini Wireless (72214) complies with Part 15 of the FCC Rules.
• Operation is subject to two conditions:
  • This device may not cause harmful interference, and
  • this device must accept any interference received, including interference that may cause undesired operation.
• As defined in Section 2.909 of the FCC Rules, the responsible party for this device is Kensington Technology Group, 2000 Alameda de las Pulgas, Second Floor, San Mateo, CA 94403, 650-572-2700.

Contacting Kensington

• Troubleshooting information and answers to frequently asked questions are available 24 hours a day on the Kensington Web site at www.support.kensington.com.

Support by Telephone

• Technical Support is available by telephone.
• Please visit: www.kensington.com for hours.
• US/Canada: 800-535-4242 or 650-572-2700
• Mexico 52(55)5384-0620

Kensington Technology Group

• 2000 Alameda de las Pulgas Second Floor San Mateo, CA 94403 USA
• www.kensington.com

ACCO Europe

Gatehouse Road Aylesbury Bucks HP19 8 DT, UNITED KINGDOM

ACCO Canada Inc.

5 Precidio Court Brampton, Ontario L65 6B7 CANADA

This manual is copyright ©2003 Kensington Technology Group, a division of ACCO Brands, Inc. Any unauthorized copying, duplicating, or other reproduction of the contents hereof is prohibited without written consent from Kensington Technology Group. All rights reserved. 11/03 Transmit is rested perat treeti Comporaion. Al ether egited and unegistered.

906-0516-01

Frequently Asked Questions

How do I install batteries in the Kensington PocketMouse Max Mouse?

To install batteries, remove the top case (battery cover) and insert the batteries. Push down on the cover and slide it back to remove it.

How can I conserve battery power on the PocketMouse Max Mouse?

You can save battery power by turning off the mouse when it's not in use. Press the scroll wheel button and the mouse connect button simultaneously to turn it off. Repeat the same action to turn it back on.

What should I do if the mouse goes into standby mode due to inactivity?

If the mouse enters standby mode after several minutes of inactivity, simply click any button to wake it up and resume normal operation.

How do I establish a wireless connection with the PocketMouse Max Mouse?

To establish a wireless connection, press the connect button on the receiver, and then press the connect button on the bottom of the mouse. Repeat this process when replacing the batteries.

What should I do if I encounter issues with the battery cover case?

If you are experiencing trouble with the battery cover case, refer to the instructions on Page 2 of the manual for guidance on proper handling.

What surfaces are ideal for the PocketMouse Max Mouse's optical sensor?

The ideal surface for the mouse's optical sensor is a bright white surface, such as a piece of paper. High gloss wood and reflective surfaces like glass or mirrors may trick the sensor.

Is the PocketMouse Max Mouse compatible with both Windows and Mac operating systems?

Yes, the PocketMouse Max Mouse is compatible with both Windows and Mac operating systems. However, you may need to reformat it for Mac use.

What is the warranty period for the PocketMouse Max Mouse?

The Kensington PocketMouse Max Mouse typically comes with a 1-Year Warranty, which covers defects in material and workmanship under normal use and service for one year from the original date of purchase. Be sure to retain the dated sales receipt for warranty service.

Can I adjust the mouse's acceleration control settings?

Yes, you can adjust acceleration control settings using the Kensington MouseWorks® software. This feature allows you to control the cursor speed to match your preferences.

What is the purpose of the reminder feature mentioned in the manual?

The reminder feature in the Kensington MouseWorks® software allows you to set reminders to take breaks from computer use. It promotes healthy computing habits to reduce strain.

Is the PocketMouse Max Mouse compatible with reflective surfaces like glass or mirrors?

The PocketMouse Max Mouse may not perform well on highly reflective surfaces. It is recommended to use it on bright white surfaces for optimal performance.

How can I improve the wireless reception of my PocketMouse Max Mouse?

Similar to adjusting an FM radio antenna, you can enhance wireless reception by experimenting with the receiver's location and orientation. Finding an optimal position can lead to better connectivity.

Download The PDF link:Kensington PocketMouse Max Mouse User Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>