cameo H1 Spotlight Instruction Manual
- June 8, 2024
- cameo
Table of Contents
cameo H1 Spotlight
PRODUCT INFORMATION
This item is a product-specific accessory intended exclusively for use with
Cameo H1 series spotlights.
These installation instructions do not replace the user manual of the
associated product. Always read the relevant user manual first.
These accessories have no influence on the intended use of the associated
product.
Observe the safety instructions in the user manual of the associated product!
The technical data given in the user manual may change in connection with this
accessory.
SAFETY INSTRUCTIONS
- Please read this manual carefully.
- Keep all information and instructions in a safe place.
- Follow the instructions.
- Use the accessory in the prescribed manner only.
HAZARD: KEEP OUT OF THE REACH OF CHILDREN! THE PRODUCT CONTAINS SMALL PARTS THAT CAN BE SWALLOWED AS WELL AS PACKAGING MATERIAL THAT CAN BE SWALLOWED! PLASTIC BAGS MUST BE KEPT OUT OF THE REACH OF CHILDREN!
INCLUDED
Remove the product from the packaging and remove all packaging material.
Please check the completeness and integrity of the delivery and notify your
distribution partner immediately after purchase if the delivery is not
complete or if it is damaged.
The product CLH1SNOOT(WH) includes:
- Snoot lens hood (A)
- Installation instructions
The product CLH1HALFSNOOT(WH) includes:
- Halfsnoot lens hood (B)
- Installation instructions
MOUNTING
- Before installation, ensure that the spotlight is completely disconnected from the power supply.
- Loosen the 4 screws from the end ring on the front of the spotlight using a suitable tool and remove the end ring from the spotlight.
- Place the snoot lens hood (A) or halfsnoot (B) on the front of the spotlight and fasten it with the previously loosened screws (see illustration).
Please note: The halfsnoot lens hood can be rotated when installed on the
spotlight and has 4 locking points at 0°, 90°, 180° and 270°.
In addition, the lens hood can be adjusted to any intermediate position.
TECHNICAL DATA
Item number:
| CLH1SNOOT (WH)| CLH1HALFSNOOT (WH)
---|---|---
Product type:| Spotlight accessory|
Spotlight accessory
Type:
| Snoot lens hood for Cameo H1 series|
Halfsnoot lens hood for Cameo H1 series
Colour:
| black (CLH1SNOOT) white (CLH1SNOOTWH)|
black (CLH1HALFSNOOT) white (CLH1HALFSNOOTWH)
Material:
| Metal| Metal
Dimensions (Ø x H):| 128 x 76 mm|
128 x 45 / 99.6 mm
Weight:
| 0.220 kg|
0.225 kg
DISPOSAL
Packaging:
- Packaging can be fed into the reusable material cycle using the usual disposal methods.
- Please separate the packaging in accordance with the disposal laws and recycling regulations in your country.
Product:
Dispose of the product in accordance with the applicable disposal regulations
in your country
MANUFACTURER’S DECLARATIONS
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
Adam Hall GmbH, Adam-Hall-Str. 1, D-61267 Neu Anspach /
E-mailInfo@adamhall.com / +49 (0)6081 /
9419-0.
For details of our current warranty conditions and limitation of liability,
see:
https://cdn-shop.adamhall.com/media/pdf/Manufacturers-Declarations
CAMEO_DE_EN_ES_FR.pdf
If you require service, please contact your distribution partner.
UKCA CONFORMITY
Adam Hall GmbH hereby declares that this product complies with the
following directives (where applicable):
R &TTE (1999/5/EC) or RED (2014/53/EU) as of June 2017
Low Voltage Directive (2014/35/EU)
EMC Directive (2014/30/EU)
RoHS (2011/65/EU) The declaration of conformity
can be found atwww.adamhall.com.
You can also request it viainfo@adamhall.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>