NITECORE BlowerBaby Electronic Photography Blower User Manual
- June 6, 2024
- Nitecore
Table of Contents
NITECORE BlowerBaby Electronic Photography Blower
IMPORTANT NOTICE CONCERNING WARRANTY SERVICE
Thank you for purchasing! Before using this product, please find your
verification code on the package box, and go to
https://photo.nitecore.com/Validation (or scan the QR code beside the
verification code to visit on your mobile phone). 
Type in your verification code and personal information as required,
and submit the page. After verification, NITECORE will send you a warranty
service email for a free warranty extension of 6 months. This email and your
registration email address are essential to your possible warranty
application.
Features
- Portable Cordless Electronic Blower
- Applicable to the cleaning of photographic equipment and more devices
- Max wind speed of 70 km/h (43.5 mph)
- Built-in 1,500mAh Li-ion battery provides a consistent usage
- Built-in Li-ion battery charging circuit with a USB-C port
- Unidirectional air intake to prevent secondary damage to the object surface
- Replaceable high density filter included for effective dust filtration
- Power indicator to indicate the remaining battery power
- Silicone nozzle to prevent accidental damage to the object surface
- Constructed from aerospace grade aluminum alloy with HA-III military grade hard-anodized finish
Technical Specifications
| Input | 5V⎓2A |
|---|---|
| Rated Power | 22.2W |
| Battery Capacity | 1,500mAh |
| Cleaning Times | Approx. 90 Times (10s per time under full charge) |
| Rotational Speed | 26,000 RPM |
| Wind Speed | 70 km/h (43.5 mph) (with Standard Filter) |
50 km/h (31.1 mph) (with Sensor Cleaning Filter)
Dimensions| 137mm×61mm×30mm (5.39″×2.4″×1.18″)
Weight| 153g (5.4oz)
Accessories| Standard Filter, USB-C Charging Cable
Charging Function
The BlowerBaby™ is equipped with an intelligent charging system. Please charge the product before the first use. Use the USB cable to connect an external power supply to the charging port to begin the charging process.
- During the charging process, the power indicator will steadily glow red.
- Once the battery is fully charged, the product will stop charging and the power indicator will turn green.
- Charging time is approx. 1 hour 30 minutes.
Operating Instructions
Fast Cleaning Mode
When the power is off, press and hold the Power Button to turn it on. Release
to turn it off.
Constant Cleaning Mode
On: When the power is off, double press the Power Button to turn it on and the
power indicator will glow blue.
Off: When the power is on, press the Power Button to turn it off.(When the
power is low in Constant Cleaning Mode, the power indicator will turn red and
the product will automatically turn off.)
Power Indication
When the power is off, press the Power Button and the power indicator will
glow to indicate the remaining battery power:
| Color of Indicator | Remaining Power |
|---|---|
| Green | Above 50% |
| Blue | Below 50% |
| Red | Below 10% |
Note: Please recharge the product when the power indicator light turns red or the product cannot be turned on due to low power.
Warnings
- Use the product for the specified purposes only. Misuse of the product may be risky.
- It is recommended to use the BlowerBaby™ together with the NITECORE Camera Cleaning Pen for the best cleaning result. Please read the user manual carefully before using the product. Connect the applicable power source only according to
- the specifications in this user manual to charge the product.
- Please recharge the product every 3 months without a long-time usage.
- Ambient Temperature of Usage: -10~40°C (14~104°F); Temperature of Storage: -20~60°C (-4~140°F)
- DO NOT put any foreign objects into the air inlet, outlet or the charging port.
- DO NOT cover the air inlet when using the product.
- DO NOT use the product without a filter, or it will gather dust in the air inlet.
- Stop using the product at any sign of malfunction.
- Store the product in ventilated areas. DO NOT use any liquid to clean the product. Keep it away from any combustible material.
- DO NOT store or use the product in an environment where the temperature is extremely high/low or changes rapidly, or in a confined area with a high temperature.
- Avoid any vibration or impact to the product.
- DO NOT disassemble or modify the product as this could result in battery explosion, cracking or leaking, causing personal injury, property damage and/or other unpredictable risks.
Maintenance
- Please replace the filter as soon as possible when it is broken, the air inlet is blocked by dust, or the wind speed is found significantly decreased.
- DO NOT use any liquid to clean the product when the air inlet is blocked by dust. It is recommended to use a soft brush to sweep the dust, replace the filter and then turn it on until no more dust comes out from the inside.
Filter Changing
It is recommended to replace the filter regularly to maintain the best
cleaning performance. Please follow the steps below:
- Rotate the filter counterclockwise and take it out.
- Install a new filter with the arrow pointing to the lower left.
- Rotate the filter clockwise to lock it up.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>