cameo DVC D5 USB To DMX Interface User Guide
- June 1, 2024
- cameo
Table of Contents
cameo DVC D5 USB To DMX Interface
Product Information
Specifications
- Product Name: DVC D5 USB to DMX-Interface
- Manufacturer: Adam Hall GmbH
- Country of Origin: Germany
- Model Number: CLDVCD5
- Channels: Upgradable with new software or USB DMX Interface
Product Usage Instructions
Safety Information
- Read and keep all instructions in a safe place.
- Follow all safety warnings and instructions.
- Use equipment only as intended.
- Use stable and compatible stands/mounts for fixed installations.
Manufacturer’s Warranty & Limitation of Liability
For warranty service, contact Adam Hall GmbH at the provided address and
email. Follow recycling guidelines based on user type (household or business).
Quick Guide
- Download the CAMEO DVC D5 Software from cameolight.com/dvc-d5.
- Sign in or create an account at store.dmxsoft.com or store.daslight.com.
- Register the interface through the software after connecting it to your computer.
- Enter the keycode found on the plastic keycard included with the product.
Frequently Asked Questions (FAQ)
-
Where can I find additional channels for the product?
You can upgrade to a new software version or load extra channels via a USB DMX Interface available at store.dmxsoft.com. -
How can I request warranty service?
To request warranty service, contact Adam Hall GmbH at Adam-Hall-Str. 1, 61267 Neu Anspach, or email [email protected], or call +49 (0) 6081 9419-0. -
What should I do with the product for recycling?
Household users should contact the retailer or local government for recycling details. Business users should refer to their supplier and purchase contract terms for disposal guidelines.
SAFETY INFORMATION
- Please read these instructions carefully.
- Keep all information and instructions in a safe place.
- Follow the instructions.
- Observe all safety warnings. Never remove safety warnings or other information from the equipment.
- Use the equipment only in the intended manner and for the intended purpose.
- Use only sufficiently stable and compatible stands and/or mounts (for fixed installations). Make certain that wall mounts are properly installed and secured. Make certain that the equipment is installed securely and cannot fall down.
- During installation, observ e the applicable safety regulations for your country.
- Never install and operate the equipment near radiators, heat registers, ovens or other sources of heat. Make certain that the equipment is always installed so that is cooled sufficiently and cannot overheat.
- Never place sources of ignition, e.g., burning candles, on the equipment.
- Ventilation slits must not be blocked.
- This appliance is designed exclusively for indoor use, do not use this equipment in the immediate vicinity of water (does not apply to special outdoor equipment – in this case, observe the special instructions noted below). Do not expose this equipment to flammable materials, fluids or gases.
- Make certain that dripping or splashed water cannot enter the equipment. Do not place containers filled with liquids, such as vases or drinking vessels, on the equipment.
- Make certain that objects cannot fall into the device.
- Use this equipment only with the accessories recommended and intended by the manufacturer.
- Do not open or modify this equipment.
- After connecting the equipment, check all cables in order to prevent damage or accidents, e.g., due to tripping hazards.
- During transport, make certain that the equipment cannot fall down and possibly cause property damage and personal injuries.
- If your equipment is no longer functioning properly, if fluids or objects have gotten inside the equipment or if it has been damaged in anot her way, switch it off immediately and unplug it from the mains outlet (if it is a powered device). This equipment may only be repaired by authorized, qualified personnel.
- Clean the equipment using a dry cloth.
- Comply with all applicable disposal laws in your country. During disposal of packaging, please separate plastic and paper/cardboard.
- Plastic bags must be kept out of reach of children.
SOFTWARE DOWNLOAD
The CAMEO DVC D5 Software installation files can be downloaded at
cameolight.com/dvc-d5.
HOW TO USE
SIGN IN OR CREATE AN ACCOUNT
If you do not have an account, one can be created at
store.dmxsoft.com or
store.daslight.com.
INTERFACE REGISTRATION THROUGH THE SOFTWARE
Connect your CAMEO DVC D5 interface to your computer and start the software
.
ENTER THE KEYCODE
Enter the keycode located on the plastic keycard with the product or on the
interface if it´s an update.
WARRANTY
MANUFACTURER’S WARRANTY & LIMITATION OF LIABILITY
LIMITATION OF LIABILITY
You can find our current warranty conditions and limitation of liability at:
https://cdn-shop.adamhall.com/media/pdf/MANUFACTURERS-DECLARATIONS_CAMEO.pdf
To request warranty service for a product, please contact Adam Hall GmbH,
Adam-HAll-Str. 1, 61267 Neu Anspach / Email
[email protected] / 49 (0) 6081 / 9419-0
PROPER DISPOSAL OF THIS PRODUCT (WASTE ELECTRICAL AND ELECTRONIC
EQUIPMENT)
(Valid in the European Union and other European countries with waste
separation) This symbol on the product, or the documents accompanying the
product, indicates that this appliance may not be treated as household waste.
This is to avoid environmental damage or personal injury due to uncontrolled
waste disposal. Please dispose of this product separately from other waste and
have it recycled to promote sustainable economic activity. Household users
should contact either the retailer where they purchased this product, or their
local government office, for details on where and how they can recycle this
item in an environmentally friendly manner. Business users should contact
their supplier and check the terms and conditions of the purchase contract.
This product should not be mixed with other commercial wastes for disposal
MORE CHANNELS? NEW SOFTWARE?
Upgarde to a new software version or load your usb DMX Interface with extra
channels. See store.dmxsoft.com for more
information.
Adam Hall GmbH
Adam-Hall-Str. 1 | 61267 Neu-Anspach | Germany
Phone: +49 6081 9419-0 | adamhall.com
Adam Hall Ltd. | The Seedbed Business Centre | SS3 9QY Essex | United Kingdom
References
- Eventtechnik Lösungen | Adam Hall Group
- Cameo DVC D5 | DMX Controllers | Cameo
- Webstore | Daslight
- Webstore | Dmxsoft