rombica mysound Tito 1C BT-S024 Bluetooth Speaker User Manual
- June 5, 2024
- rombica
Table of Contents
rombica mysound Tito 1C BT-S024 Bluetooth Speaker User Manual
Thank you for purchasing Rombica device. Please read this user manual before the operation and save it for the future
IN THE BOX
- Bluetooth speaker
- USB cable
- Manual
GENERAL INFORMATION
- Mode button
- Short press — Pause/Play
- Long press — power on/off
- Quick double press — call to last caller (Bluetooth mode)
- Short press during incoming call — receive incoming call (Bluetooth mode)
- Long press during incoming call — reject incoming call (Bluetooth mode
- Micro-USB port for charging built-in battery
- Microphone
- LED indicator #1
- LED indicator #2
- Dynamic
SPECIFICATION
- Power: DC 5V, from battery
- Bluetooth version: v 5.
- True Wireless Stereo support: yes
- Frequency range: 100 Hz — 20 kHz
- Speaker power: 3 W
- Speaker diameter: 33 mm
- Battery: 400 mAh / 3.7 V
- Interfaces: micro-USB, BT, mic
TECHNICAL CHARACTERISTICS AND APPEARANCE MAY BE CHANGED WITHOUT PRIOR NOTICE
OPERATION OF THE DEVICE
POWER ON
Press and hold Mode button. Sound notification and turned-on LED indicator#2
will confirm turning-on
POWER OFF
Press and hold Mode button. Sound notification and turned-off LED indicator#2
will confirm turning-off
PAIRING VIA BLUETOOTH
- Turn on the speaker
- Open Bluetooth settings on your smartphone/PC, enable Bluetooth and search for new devices. When Bluetooth speaker found, confirm pairing
- After successful pairing both the Bluetooth speaker and your device, you can control playback by Mode button
TRUE WIRELESS STEREO MODE
When you have two Rombica Mysound Tito speakers you can use them together with
True Wireless Stereo mode.
- Turn on both of the Rombica Mysound Tito speakers
- Quick triple press Mode button (1) on any of Rombica Mysound Tito speakers to pair two speakers with each other. Sound notification will confirm TWS pairing
- Pair speakers with your device same way as described in paragraph «Pairing via Bluetooth»
- If you want to cancel TWS connection between two speakers quick triple press Mode button (1) on any of Rombica Mysound Tito speakers.
PHONE CALLS
You could receive incoming calls with Bluetooth speaker if it paired to
smartphone/tablet PC. You can talk using built-in mic and dynamic. Short press
Mode button to receive the incoming call, press once more to end the call.
Long press Mode button is rejecting incoming call
BATTERY CHARGING
Before use, fully charge Bluetooth speaker within 6 hours. New battery
requires 2-3 full charge-discharge cycles to reach full capacity. Use
(supplied) cable and connect it to the Bluetooth speaker by micro-USB side.
Connect USB cable to the PC or wall charger (wall charger is not supplied).
LED indicator #1 is red during charging and turns off when the battery is
fully charged
SAFETY INFORMATION
- Before charging make sure that voltage of the power is 5V. The recommended adapter is 5V / 300mA
- If device is not used during long time, charge it at least once per month
- In cause of breaking do not try to open and repair device by yourself. Use service center
- Avoid influence of the high humidity, dust and dirt. Use dry soft lint-free cloth to clean device. Not allowed to use washing or cleaning liquids
- Do not store, use or charge device near heat sources and flammable objects, during low or high ambient temperature. Charging can be done only under adult supervision. Recommended temperature is 5 to 35 °C
- Not allowed to drop or hit device
- Do not insert foreign objects into the device interfaces
- Turn off device after use
- Never pull the cord to disconnect cable, pull the plug
- Bluetooth speaker is not intended for the commercial use
- Standard battery life is 500 charge-discharge cycles. After exceeding 500 cycles the effective capacity of the battery can be reduced. Effective capacity also depends on the ambient temperature
- Do not cover working device by cloth or other material
STORAGE CONDITIONS
Keep the device in a dry, well-ventilated place, far from heaters and direct sunlight. Keep the device out of reach of children. Do not bite or lick device, as it may cause damage or explode the device. Children or persons with disabilities should not use the device without the supervision of the responsible person.
DISPOSAL
Do not dispose with household waste! Required to dispose this electrical device at designated recycling collection point for electrical devices. It ensures that device is recycled professionally and prevents the release of the harmful substance into the environment. Make sure that device is uncharged before disposal.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>