kogan KASB130DDWSA 2.1CH 130W Dolby Soundbar With Wireless Subwoofer User Guide

kogan KASB130DDWSA 2.1CH 130W Dolby Soundbar With Wireless Subwoofer

SAFETY & WARNINGS

Ensure to read all instructions and warnings in this user guide prior to first use. Retain this user guide for future reference.

•  This soundbar and subwoofer uses a voltage of 220–240V and a frequency of 50–60Hz. Ensure the power socket used matches this.
•  Do not use the soundbar and subwoofer underwater or in humid environments.
•  Do not use the soundbar and subwoofer in high temperatures or near heat sources.
•  Do not expose this soundbar and subwoofer to direct sunlight for extended periods.
•  Do not allow water or any other liquid to touch the soundbar or subwoofer.
•  Do not place the soundbar or subwoofer near water or liquid-filled items (for example, vases).
•  Ensure to the soundbar and subwoofer is placed on a stable level surface, or securely mounted to the wall.
•  Do not listen at high volumes for extended periods as this may cause hearing damage.
•  Do not attempt to modify or disassemble the soundbar or subwoofer yourself.
•  If the soundbar or subwoofer is damaged, stop use and contact help.Kogan.com for assistance.

COMPONENTS LIST

•  Soundbar (x1)
•  Power adapter for the soundbar (x1)
•  RCA cable (x1)
•  Wall mounting screw (x2)
•  Remote control (x1)
•  Warranty card (x1)
•  Subwoofer (x1)
•  Power adapter for the subwoofer (x1)
•  Wall mounting bracket (x2)
•  Metal stand (x2)
•  User guide (x1)

OVERVIEW

Top view (Soundbar)

1. Bluetooth button

2. Volume up button

3. Volume down button

4. Power button
   Ports (Soundbar)
   

5.  Power port

6.  HDMI (ARC) input

7. USB port

8.  Line input

9.  Optical input

10. AUX input R (RCA/Phono)

11. AUX input L (RCA/Phono)
    Subwoofer
    

12. Power port

13.  LED indicator

14.  ON/OFF switch

INSTALLATION

Wall mounting
If you would like the soundbar to be wall-mounted, follows the steps below.\

1.  Align the soundbar against the wall where you would like to mount the soundbar on. There are two sets of screws located at the back of the soundbar. Ensure there is at least a 10cm clearance between the TV and soundbar.

2.  Mark the vertical midpoint of each screw set on the wall. This distance between the markings should be approximately 406.7mm. Remove the soundbar and using a drill (not supplied), drill holes on the two markings.

3.  Using a Phillips screwdriver (not supplied), loosen the screws on the soundbar. Secure the provided brackets with the two loosened screws each.

4.  Insert one wall anchor into each drilled hole. Using a Phillips screwdriver, secure the anchors with the two provided screws.

5.  Hook the brackets and soundbar onto the wall.

OPERATION

Remote control

Previous button

| | ·   Press this button to play the previous track.

·   This functionality only applies in Bluetooth and USB mode.

---|---|---

Next button

| | ·   Press this button to play the next track.

·   This functionality only applies in Bluetooth and USB mode.

Play/Pause button

| | ·   Press this button to play/pause tracks.

·   This functionality only applies in Bluetooth and USB mode.

Music EQ button

|

MUSIC

| Pressing this button will alter the EQ to be optimised for music.

Movie EQ button

|

MOVIE

| Pressing this button will alter the EQ to be optimised for watching movies.

Dialogue EQ button

|

DIALOGUE

| Pressing this button will alter the EQ to be optimised for dialogue.
Bass increase button| BASS+| Press this button to increase bass.
Bass decrease button| BASS–| Press this button to decrease bass.

Mode/Mute button

|

| ·   Press this button to change the connection mode.

·   Press and hold this button to mute/unmute the soundbar.

Powering on

1.  Connect one end of the soundbar’s power adapter into the power port on the soundbar. Connect the other end into a power socket and switch on the socket. The soundbar will then enter standby.
2.  Press the power button on the soundbar or remote control to turn on the soundbar.

Notes:

•  The remote control has a working range of 6 meters.
•  This remote control requires x1 AAA battery (not included) to power it.

Connect one end of the subwoofer’s power adapter into the power port on the subwoofer. Connect the other end to a power socket and switch on the socket. Toggle the ON/OFF switch on the subwoofer into the “ON” position. The subwoofer will then automatically pair to the soundbar.
Press the power button on the soundbar, or the mode/mute button on the remote control to switch to the desired connection mode.

Note:
The soundbar may be detached into 2 parts. Each part can then be placed on the provided metal stands.

Connection modes

This soundbar can be connected via six modes. These include:

•  Bluetooth mode
•  HDMI (ARC) mode
•  Line in mode
•  AUX-in mode
•  Optical mode
•  USB mode

Steps on how to connect audio devices using each mode are detailed below.

Bluetooth mode

•  By default, the soundbar will enter Bluetooth mode when turned on. If this is not the case, press the power button on the soundbar or the mode/mute button on the remote control until the LED indicator illuminates a flashing blue.
•  Place your audio device within 3 meters of the soundbar. Turn on the Bluetooth of the audio device and allow it to search for nearby Bluetooth devices.
• Select “KASB130DDWSA” from the Bluetooth device list and tap to connect.

Note:
If the device asks for a password, enter “0000” and press confirm to pair the device with the soundbar.

•  Once paired, the LED indicator will illuminate a solid blue. Music can now be played from your device with its sound emitting from the soundbar. Ensure to keep the audio device away from obstructions and within 10 meters of the soundbar to maintain a stable connection.
•  To disconnect the audio device, press the Bluetooth button on the soundbar. The soundbar will remain available for connection to other Bluetooth audio devices until it is turned off or another connection mode is selected.

HDMI (ARC) mode
This soundbar supports HDMI with an audio return channel (ARC). Many standard HDMI ports support ARC but if unsure, check with the TV’s manufacturer. This allows the sound from a TV to emit through the soundbar rather than the TV’s inbuilt speakers.

•  Press the power button on the soundbar or mode/mute button on the remote control until the LED indicator illuminates light blue.
•  Connect one end of an HDMI cable (not included) into the HDMI (ARC) input on the soundbar. Connect the other end into the HDMI (ARC) port of your TV.
•  Enter the settings of the TV and set the audio/digital output to be “PCM” or “Dolby”.
•  The TV’s sound will now emit from the soundbar. Use the remote control to make any desired audio adjustments.

Line in mode

•  Connect one end of a 3.5mm audio cable (not included) into your device. Connect the other end to the line input on the soundbar.
•  Press the power button on the soundbar or mode/mute button on the remote control until the LED indicator illuminates green.
•  To prevent sudden loudness, adjust the volume on your device to low then begin playing. Adjust the volume and audio settings using the remote control as desired.

AUX in mode

•  Using the included RCA cable, connect one end of the cable into your device. Connect the other end into the AUX input of the soundbar.
•  Press the power button on the soundbar or the mode/mute button on the remote control until the LED indicator illuminates yellow.
•  To prevent sudden loudness, adjust the volume on your device to low then begin playing. Adjust the volume and audio settings using the remote control as desired.

Optical mode

•  Press the power button on the soundbar or the mode/mute button on the remote control until the LED indicator illuminates purple.
•  Connect one end of an optical cable (not included) to your device (for example, TV, gaming console, DVD player). Connect the other end into the optical input on the soundbar.
•  Enter the settings on your device and set the audio/digital output to be “PCM” or “Dolby”.
•  Sound from your device will now be emitted through the soundbar. Use the remote control to make any audio adjustments.

USB mode

•  Insert a USB into the USB port of the soundbar.
•  Press the power button on the soundbar or the mode/mute button on the remote control until the LED indicator illuminates white.
•  Press the Play/Pause button to play and pause music.
•  Press the Previous or Next button to play previous or skip songs.

Powering off
Press and hold the power button on the soundbar or remote control to turn the soundbar off.

Remote control battery replacement
This remote control is powered with x1 AAA battery (not included). To replace the battery:

•  Slide the back cover and remove the old battery.
•  Noting the polarity markings ‘(+/–)’, insert a new battery into the remote control.
•  Slide the back cover onto the remote control.

TROUBLESHOOTING

Problem| R e a s o n / s ol u t i on
---|---

The Bluetooth device cannot be paired

| ·   Another device may already be paired to the soundbar. When powered on, the soundbar will automatically find any paired devices and connect.

·   Disable the Bluetooth from the paired device to connect the desired device.

Bluetooth playback volume is too low| ****

Adjust the volume using the Bluetooth connected device.

Bluetooth device is not playing within 10 metres of the soundbar| ****

There may be obstructions between the device and the soundbar. Remove any obstructions that may be present.

Bluetooth connection is interrupted with disconnected sound

| ·   There may be an obstruction between the soundbar and Bluetooth device. Remove any obstructions that may be present.

·   The Bluetooth device is further than 10 metres away from the soundbar. Bring the device closer to the soundbar.

The subwoofer is not pairing to the soundbar| ****

Contact help.Kogan.com for assistance.

SPECIFICATIONS

• Dimensions: Soundbar: 813 x 92 x 63mm Subwoofer: 195 x 298 x 250mm
• Power: 32.5W (each detachable soundbar), 65W (subwoofer
• Frequency: 50Hz
• Voltage: 220–240V
• Speaker frequency: 60Hz–16kHz
• Bluetooth: Version 5.0. Supports A2DP and AVRCP
• Bluetooth range: Up to 10m

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require, head online to help.kogan.com

References

• Kogan Help Centre

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>