deli S206 Bar Code Scanner User Manual

deli S206 Bar Code Scanner

Dear customers, thank you for your products. We are committed to providing our customers with high-quality products To ensure best performance, please read this manual carefully before use!

How to use the barcode scanner correctly

1. If the barcode is small, the barcode shall be close to the product scanning window; On the contrary, if the barcode is large, the barcode should be slightly away from the product scanning window, so that it is easier to read the barcode correctly.
2. If the barcode has a high reflectance (for example, the barcode surface is coated with film), the barcode should be kept at a certain angle with the product scanning window, so that the barcode can be successfully scanned.
3. When scanning the barcode, it must be aligned and the scanning line must be completely wrapped around the barcode for decoding. It is not allowed to scan only part of the barcode, otherwise, there may be an error code.

Component description

Packing list

• Barcode Scanner x1
• USB Cable x1
• Manual x1
• Paper Clip x1

Technical parameter

Settings

Global configuration code setting

Communication interface settings

Reading mode setting

Decode sound settings

Common terminator settings

Troubleshooting

Simple maintenance method

1. The dirt and dust on the scanning window sometimes affect the work of the scanner. When cleaning, you should use high-quality facial tissue paper, gently wipe it, and then blow it with a blowing balloon. If the paper with poor quality is used for wiping for a long time, the surface finish of the scanning window will be damaged and the reading effect of the scanner will be affected.
2. The shell of the scanner can be wiped with a soft cleaning cloth. If necessary, a small amount of detergent can be added with water, and then wiped with a soft cloth dipped in water.

Maintenance

• Our company is responsible for free maintenance in case of product failure within one year of normal use from the date of purchase.
• The start date of the warranty period is subject to the purchase date and invoice of the product warranty card.
• Please show the product warranty card and invoice during maintenance.
• Please keep this warranty card properly. If it is lost, it will not be replaced. The purchase date filled in must be consistent with the invoice number, otherwise it will be invalid.
• This cord cannot be altered, otherwise it will be invalid. For products beyond the warranty period or not subject to free maintenance, the maintenance service center of our company is still enthusiastic to serve you.
• One of the following conditions does not belong to the scope of free maintenance:
  1. Products beyond the warranty period
  2. Those who cannot provide purchase invoices or valid vouchers.
  3. The appearance is naturally old due to use, and the consumer requires updating.
  4. Failure caused by failure to use according to the instructions
  5. Failure caused by falling or collision.
  6. Failure is caused by self-assembly, disassembly, and repair.
  7. Samples and processed products for commercial display and products with performance overload test

The table of toxic and hazardous substances/elements and their content

• : Indicates that this toxic or hazardous substance contained in all of the homogeneous materials for this part is below the limit requirement in SJ/T 11363-2006 «Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products».
• : Indicates that this toxic or hazardous substance contained in at least one of the homogeneous materials used for this part is above the limit requirement in SJ/T 11363-2006 «Requirements for Concentration Limits for Certain Hazardous Substances in Electronic Information Products». Due to limitations of science and technology development, these toxic or hazardous substances cannot be replaced or reduced for now. Under normal use conditions, no leakage or abrupt change will occur within 10 years, nor will it cause pollution to the environment or damage to people and property.

Environment-Friendly Use Period

This mark refers to the environment-friendly use period of electronic and electrical products sold under the Regulation of the People’s Republic of China on Limit on Use of Hazardous Substances in Electric and Electronic Products and General Guidelines of Environment-Friendly Use Period of Electronic Information Products.

WARRANTY CARD

REPAIR FORM

For any questions, please contact your local dealer.

DELI GROUP CO., LTD.

• Deli Industrial Zone, Ninghai County, Ningbo City, Zhejiang Province, China Made in China.
• info@nbdeli.com
• www.deliworld.com.

References

• Intrinsic Development : Professional Software Services

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>