kanto PS400SG Outdoor TV Mount User Manual

June 10, 2024
Kanto

PS400SG Outdoor TV Mount
User Manual

kanto PS400SG Outdoor TV Mount

PS400SG Outdoor TV Mount

STAINLESS STEEL OUTDOOR FULL MOTION TV MOUNT

kanto PS400SG Outdoor TV Mount - kg Supporting your digital lifestyle™
Thank you for choosing Kanto
Read these instructions fully before assembly and installation. If you do not understand these directions, or have any doubts about the safety of the installation, please consult a qualified installation contractor. Make sure there are no defective or missing parts. Do not use defective parts. Kanto cannot be liable for property damage or injury caused by incorrect mounting, incorrect assembly, lifting or incorrect use of this product. If there is hardware missing, or if you are uncertain whether a part is defective, please contact Kanto directly using one of the methods below.
CAUTION
The maximum loading weight is 88 lb (40 kg). This mount is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in instability causing possible injury. The wall you plan to affix the Kanto mount to must be able to support more than 5 times the weight of the television and the mount combined. Do not use this product for any purpose other than to mount a VESA compliant TV on a vertical surface as outlined in this manual. Improper installation may cause damage to your TV or serious  injury. This product should not be mounted on steel stud walls or cinder block walls. Consult a qualified installation contractor if you are unsure about the type of wall you may have.

Supplied Parts and Hardware

kanto PS400SG Outdoor TV Mount - Parts

Project Overview

IMPORTANT!: Please read this entire document before  attempting assembly.

  1. Select TV Screws and Spacers
  2. Select Spacers for Irregular TVs
  3. Attach TV Brackets
  4. Mount Wall Plate Assembly
  5. Attach Wall Plate Covers
  6. Hang and Secure TV
  7. Level TV
  8. Finalize Adjustments
  9. Manage Cables

If you have any problems or difficulties while following these instructions, please contact Kanto directly:
Email: support@kantoliving.com
Toll Free: US & Canada: 1-888-848-2643

  1. Select TV Screws and Spacers

|
---|---
1.1 A–I Select Screws The back of your TV has 4 screw holes in a square or rectangular pattern. This is where the mount will attach to your TV. Kanto provides several sizes and lengths of screws. This guide will help you select the right screws for your TV. You will only use 4 of the provided screws to attach your TV – the rest are not needed.| 1.2 J–K Select Spacers Plastic spacers are also provided in 2 thicknesses to allow the mount to work with curved TVs, and TVs that have recessed mount holes, protrusions, or inputs in the way. They can also be used to prevent the TV screws from going too deep and damaging your TV. You may not need spacers for your TV.
2. Select Spacers for Irregular TVkanto PS400SG Outdoor TV Mount - Figkanto PS400SG Outdoor TV Mount - Irregular TVs Spacers can be used to provide clearance around protrusions on the back of your TV, or to accommodate a curved TV. You may need to use longer screws. 3. Attach TV Brackets
WARNING
Do not lay the TV face down on its front. Use a wall or TV stand.
kanto PS400SG Outdoor TV Mount - Brackets *Optional: Only applicable if using M4 / M5 / M6
3b.**
kanto PS400SG Outdoor TV Mount - Brackets 2

  1. a.Mount Wall Plate Assembly (Wood Stud Wall)
    kanto PS400SG Outdoor TV Mount - Assembly
    Mount height depends on TV size, viewing position, and personal preference.
    kanto PS400SG Outdoor TV Mount - Brackets 4Mount height depends on TV size, viewing position, and personal preference.
    WARNING

    Do not use concrete anchors in drywall or wood stud walls.
    CAUTION
    Make sure the supporting surface will support the load limits outlined in the caution on page two. Make sure the wood studs are spaced 16″ on center. Make sure the drywall covering the wood studs is at maximum 5/8″ thick. Tighten lag bolts (O) until the wall plate is snug against the wall. Do not over tighten the lag bolts (O). Each lag bolt must be located in the middle of a wood stud.
    4b. Mount Wall Plate Assembly (Concrete Wall)
    kanto PS400SG Outdoor TV Mount - Brackets5 WARNING

    Do not use concrete anchors in drywall or wood stud walls.
    Mount height depends on TV size, viewing position, and personal preference.
    kanto PS400SG Outdoor TV Mount - Brackets6 CAUTION
    Make sure the concrete wall is at least 5.5” thick. Make sure the anchor is seated completely flush with the concrete surface even if there is another layer of material, such as drywall. If drywall is over 5/8” thick, custom lag bolts must be used. Concrete must be a minimum of 2000 psi in density.

  2. Attach Wall Plate Covers
    kanto PS400SG Outdoor TV Mount - Brackets 7

  3. Hang and Secure TV


kanto PS400SG Outdoor TV Mount - Brackets 8|
---|---

  1. Level TV kanto PS400SG Outdoor TV Mount - Brackets 10
  2. **Finalize Adjustments
  • Adjust Arm Tension (Optional)
    **

    1. Manage Cables
      kanto PS400SG Outdoor TV Mount - Brackets 12

kanto PS400SG Outdoor TV Mount - Brackets 13kanto
PS400SG Outdoor TV Mount - Brackets 14

Limited Warranty to Original Purchaser
Kanto Living Inc. (Kanto) warrants the equipment it manufactures to be free from defects in material for the limited warranty period of 5 years.
If equipment fails because of such defects and Kanto is notified within 5 years from the date of shipment with proof of original invoice from  an authorized reseller, Kanto will, at its option, provide replacement parts or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications. Any replacement parts or replacement units are warranted for 90 days from the day of reshipment to the original purchaser.
Customers will be responsible for obtaining a Return Authorization Number and paying shipping costs to return product to a Kanto location or authorized depot. If the equipment is covered under the warranty provisions above, Kanto will replace parts or provide a replacement unit, and be responsible for shipping costs to the customer. Please keep the original packaging to prevent damage to the product during shipping. Insuring your shipment is also recommended.
The information in the manual has been carefully checked and is believed to be accurate. However, Kanto assumes no responsibility for any inaccuracies that may be contained in the manual. In no event will Kanto be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect in the equipment, even if advised of the possibility of such damages. This warranty is in lieu of all other warranties expressed or implied, including without limitation, any implied warranty, including any warranty of merchantability and fitness for any particular purpose, all of which are expressly disclaimed.

www.kantomounts.com
support@kantoliving.com
Toll Free: 1-888-848-2643

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals