Kanto PX720 Full Motion TV Mount User Manual
- June 2, 2024
- Kanto
Table of Contents
- Thank you for choosing Kanto
- Supplied Parts and Hardware
- Project Overview
- 1. Select TV Screws and Spacers
- 2. Select Spacers for Irregular TVs
- 3. Attach TV Brackets
- **3.3
- **5a. Mount Wall Plate Assembly (Wood Stud Wall)
- 5b. Mount Wall Plate Assembly (Concrete Wall)
- 6. Hang and Secure TV
- 7. Level TV
- 8. Finalize Adjustments
- 9. Manage Cables
- Limited Warranty to Original Purchaser
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
User Manual
PX720
FULL MOTION TV MOUNT
Thank you for choosing Kanto
Read these instructions fully before assembly and installation. If you do not
understand these directions, or have any doubts about the safety of the
installation, please consult a qualified installation contractor. Make sure
there are no defective or missing parts.
Do not use defective parts. Kanto cannot be liable for property damage or
injury caused by incorrect mounting, incorrect assembly,
lifting or incorrect use of this product. If there is hardware missing, or if
you are uncertain whether a part is defective, please contact Kanto directly
using one of the methods below.
CAUTION
The maximum loading weight is 150 lb (68 kg). This mount is intended for use
only with the maximum weights indicated.
Use with products heavier than the maximum weights indicated may result in
instability causing possible injury. The wall you plan to affix the Kanto
mount to must be able to support more than 5 times the weight of the
television and the mount combined. Do not use this product for any purpose
other than to mount a VESA compliant TV on a vertical surface as outlined in
this manual. Improper installation may cause damage to your TV or serious
injury. This product should not be mounted on steel stud walls or cinder
block walls. Consult a qualified installation contractor if you are unsure
about the type of wall you may have.
Supplied Parts and Hardware
Project Overview
- Select TV Screws and Spacers
- Select Spacers for Irregular TVs
- Attach TV Brackets
- Remove Covers
- Mount Wall Plate Assembly
- Hang and Secure TV
- Level TV
- Finalize Adjustments
- Manage Cables
1. Select TV Screws and Spacers
1.1 A–G Select Screws
The back of your TV has 4 screw holes in a square or rectangular pattern. This
is where the mount will attach to your TV.
Kanto provides several sizes and lengths of screws. This guide will help you
select the right screws for your TV. You will only use 4 of the provided
screws to attach your TV – the rest are not needed.
2. Select Spacers for Irregular TVs
Spacers can be used to provide clearance around protrusions on the back of
your TV, or to accommodate a curved TV. You may need to use longer screws.
3. Attach TV Brackets
WARNING:
Do not lay the TV face down on its front. Use a wall or TV stand.
3.1
3.2
†Only applicable if using M5 / M6 screw Applicable uniquement avec vis M5 /
M6 Aplicable sólo con tornillos M5 / M6
**3.3
3.4, 3.5
3.6
4. Remove Covers
**
4.1
4.2
**5a. Mount Wall Plate Assembly (Wood Stud Wall)
**
5.1, 5.2
5.3
5b. Mount Wall Plate Assembly (Concrete Wall)
5.1
**5.2
**
**5.3, 5.4
**
6. Hang and Secure TV
6.1, 6.2, 6.3, 6.4
7. Level TV
7.1, 7.2, 7.3
8. Finalize Adjustments
8.1, 8.2, 8.3, 8.4,
9. Manage Cables
Limited Warranty to Original Purchaser
Kanto Living Inc. (Kanto) warrants the equipment it manufactures to be free
from defects in material for the limited warranty period of 5 years.
If equipment fails because of such defects and Kanto is notified within 5
years from the date of shipment with proof of original invoice from an
authorized reseller, Kanto will, at its option, provide replacement parts or
replace the equipment, provided that the equipment has not been subjected to
mechanical, electrical, or other abuse or modifications. Any replacement parts
or replacement units are warranted for 90 days from the day of reshipment to
the original purchaser. Customers will be responsible for obtaining a Return
Authorization Number and paying shipping costs to return product to a Kanto
location or authorized depot. If the equipment is covered under the warranty
provisions above, Kanto will replace parts or provide a replacement unit, and
be responsible for shipping costs to the customer. Please keep the original
packaging to prevent damage to the product during shipping. Insuring your
shipment is also recommended.
The information in the manual has been carefully checked and is believed to be
accurate. However, Kanto assumes no responsibility for any inaccuracies that
may be contained in the manual. In no event will Kanto be liable for direct,
indirect, special, incidental, or consequential damages resulting from any
defect in the equipment, even if advised of the possibility of such damages.
This warranty is in lieu of all other warranties expressed or implied,
including without limitation, any implied warranty, including any warranty of
merchant ability and fitness for any particular purpose, all of which are
expressly disclaimed.
Kanto PX720 Full Motion TV Mount User Manual – Optimized
PDF
Kanto PX720 Full Motion TV Mount User Manual – Original
PDF