kanto SP9 Desktop Speaker Stands User Manual

October 27, 2023
Kanto

kanto logo SP9 Desktop Speaker Stands
User Manual
kanto SP9 Desktop Speaker Stands SPEAKER STAND
Supporting your digital lifestyle™

Thank you for choosing Kanto
Read these instructions fully before assembly and installation. If you do not understand these directions, or have any doubts about the safety of the installation, please consult a qualified installation contractor. Make sure there are no defective or missing parts.
Do not use defective parts. Kanto cannot be liable for property damage or injury caused by incorrect mounting, incorrect assembly, lifting or incorrect use of this product. If  there is hardware missing, or if you are uncertain whether a part is defective, please contact Kanto directly using one of the methods below.

CAUTION
The maximum loading weight is 30 lb (13.6 kg). This speaker stand is intended for use only with the maximum weights indicated. Use with products heavier than the  maximum weights indicated may result in instability causing possible injury.

1-888-848-2643
**** supprt@kantoliving.com

Supplied Parts and Hardware

kanto SP9 Desktop Speaker Stands - Parts and
Hardware

Project Overview

If you have any problems or difficulties while following these instructions, please contact Kanto directly: Email: support@kantoliving.com
Toll Free: US & Canada: 1-888-848-2643

Assemble Base

kanto SP9 Desktop Speaker Stands - Assemble
Base

Insert Cables

kanto SP9 Desktop Speaker Stands - . Insert
Cables

Change to Large Top Plate (Optional)

kanto SP9 Desktop Speaker Stands -
Large Top

Adjust Top Plate Angle (Optional)

kanto SP9 Desktop Speaker Stands -
Large Top 1

Mount Speaker (Optional)

Optional step. Only for speakers with standard threaded speaker mount. Speaker not included.kanto SP9 Desktop Speaker Stands - Mount
Speaker

Attach Top Plate to Tube

NOTE
Procedure is the same if you did not mount a speaker in step 3.kanto SP9
Desktop Speaker Stands - Attach Top Plate

kanto logokanto SP9 Desktop Speaker Stands - fig

Limited Warranty to Original Purchaser
Kanto Living Inc. (Kanto) warrants the equipment it manufactures to be free from defects in material for the limited warranty period of 2 years.
If equipment fails because of such defects and Kanto is notified within 2 years from the date of shipment with proof of original invoice from an authorized reseller, Kanto  will, at its option, provide replacement parts or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or  modifications. Any replacement parts or replacement units are warranted for 90 days from the day of reshipment to the original purchaser.
Customers will be responsible for obtaining a Return Authorization Number and paying shipping costs to return product to a Kanto location or authorized depot. If the  equipment is covered under the warranty provisions above, Kanto will replace parts or provide a replacement unit, and be responsible for shipping costs to the customer.  Please keep the original packaging to prevent damage to the product during shipping. Insuring your shipment is also recommended.
The information in the manual has been carefully checked and is believed to be accurate. However, Kanto assumes no responsibility for any inaccuracies that may be  contained in the manual. In no event will Kanto be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect in the equipment, even if  advised of the possibility of such damages. This warranty is in lieu of all other warranties expressed or implied, including without limitation, any implied warranty, including  any warranty of merchantability and fitness for any particular purpose, all of which are expressly disclaimed.

22-H
www.kantoaudio.com
support@kantoliving.com
Toll Free: US & Canada: 1-888-848-2643

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals