kanto PDX650SG 37 Inch TV Wall Mounts User Manual
- June 3, 2024
- Kanto
Table of Contents
- kanto PDX650SG 37 Inch TV Wall Mounts
- Supplied Parts and Hardware
- Project Overview
- Select TV Screws and Spacers
- Select Spacers for Irregular TVs
- Attach TV Brackets
- Hang and Secure TV
- Level TV
- Finalize Adjustments
- Manage Cables
- Limited Warranty to Original Purchaser
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
kanto PDX650SG 37 Inch TV Wall Mounts
Supplied Parts and Hardware
Required Tools
Wood stud wall
Concrete wall
Project Overview
- Select TV Screws and Spacers
- Select Spacers for Irregular TVs
- Attach TV Brackets
- Mount Wall Plate Assembly
- Hang and Secure TV
- Level TV
- Finalize Adjustments
- Manage Cables
IMPORTANT: Please read this entire document before attempting assembly.
If you have any problems or difficulties while following these instructions,
please contact Kanto directly:
Email: support@kantoliving.com
Toll Free: US & Canada:
1-888-848-2643
Select TV Screws and Spacers
A–G Select Screws
The back of your TV has 4 screw holes in a square or rectangular pattern. This is where the mount will attach to your TV. Kanto provides several sizes and lengths of screws. This guide will help you select the right screws for your TV. You will only use 4 of the provided screws to attach your TV – the rest are not needed.
H–J Select Spacers
Plastic spacers are also provided in 3 thicknesses to allow the mount to work with curved TVs, and TVs that have recessed mount holes, protrusions, or inputs in the way. They can also be used to prevent the TV screws from going too deep and damaging your TV. You may not need spacers for your TV.
Select Spacers for Irregular TVs
Spacers can be used to provide clearance around protrusions on the back of your TV, or to accommodate a curved TV. You may need to use longer screws.
Attach TV Brackets
WARNING
Do not lay the TV face down on its front. Use a wall or TV stand.
Note: Once complete, proceed to step 4.
WARNING
Do not lay the TV face down on its front. Use a wall or TV stand.
Use whichever holes and slots work with your TV’s VESA pattern.
Only applicable if using M5 / M6 screw
- *Optional
Mount Wall Plate Assembly (Wood Stud Wall)
Mount height depends on TV size, viewing position, and personal preference.
WARNING
Do not use concrete anchors in drywall or wood stud walls.
CAUTION
Make sure the supporting surface will support the load limits outlined in the
caution on page two. Make sure the wood studs are spaced 16″ on center. Make
sure the drywall covering the wood studs is at maximum 5/8″ thick. Tighten lag
bolts (N) until the wall plate is snug against the wall. Do not over tighten
the lag bolts (N). Each lag bolt must be located in the middle of a wood stud.
Mount Wall Plate Assembly (Concrete Wall)
Mount height depends on TV size, viewing position, and personal preference.
WARNING
Do not use concrete anchors in drywall or wood stud walls.
CAUTION
Make sure the concrete wall is at least 5.5” thick. Make sure the anchor is
seated completely flush with the concrete surface even if there is another
layer of material, such as drywall. If drywall is over 5/8” thick, custom lag
bolts must be used. Concrete must be a minimum of 2000 psi in density.
Hang and Secure TV
Level TV
Finalize Adjustments
Manage Cables
Limited Warranty to Original Purchaser
Kanto Living Inc. (Kanto) warrants the equipment it manufactures to be free
from defects in material for the limited warranty period of 5 years.
If equipment fails because of such defects and Kanto is notified within 5
years from the date of shipment with proof of original invoice from an
authorized reseller, Kanto will, at its option, provide replacement parts or
replace the equipment, provided that the equipment has not been subjected to
mechanical, electrical, or other abuse or modifications. Any replacement parts
or replacement units are warranted for 90 days from the day of reshipment to
the original purchaser.
Customers will be responsible for obtaining a Return Authorization Number and paying shipping costs to return product to a Kanto location or authorized depot. If the equipment is covered under the warranty provisions above, Kanto will replace parts or provide a replacement unit, and be responsible for shipping costs to the customer. Please keep the original packaging to prevent damage to the product during shipping. Insuring your shipment is also recommended.
The information in the manual has been carefully checked and is believed to be accurate. However, Kanto assumes no responsibility for any inaccuracies that may be contained in the manual. In no event will Kanto be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect in the equipment, even if advised of the possibility of such damages. This warranty is in lieu of all other warranties expressed or implied, including without limitation, any implied warranty, including any warranty of merchantability and fitness for any particular purpose, all of which are expressly disclaimed.
support@kantoliving.com
Toll Free: 1-888-848-2643