kanto PSC350 Column TV Mount User Manual

June 3, 2024
Kanto

kanto PSC350 Column TV Mount

PSC350 Column TV MountPSC350 Column TV
Mount

Interdiction

Thank you for choosing Kanto
Read these instructions fully before assembly and installation. If you do not understand these directions, or have any doubts about the safety of the installation, please consult a qualified installation contractor. Make sure there are no defective or missing parts.
Do not use defective parts. Kanto cannot be liable for property damage or injury caused by incorrect mounting, incorrect assembly, lifting or incorrect use of this product. If there is hardware missing, or if you are uncertain whether a part is defective, please contact Kanto directly using one of the methods below.

CAUTION
The maximum loading weight is 88 lb (40 kg). This mount is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in instability causing possible injury. The column you plan to affix the Kanto mount to must be able to support more than 5 times the weight of the television and the mount combined. Do not use this product for any purpose other than to mount a VESA compliant TV on a column as outlined in this manual. Improper installation may cause damage to your TV or serious injury. Consult a qualified installation contractor if you are unsure about the type of wall you may have.

1-8~88-848-2643
Email iconsupport@kantoliving.com
See installation video online at: www.kantomounts.com/resources

Supplied Parts and Hardware

Supplied Parts and Hardware
Supplied Parts and Hardware

Required Tools

  • Socket Set

  • **Phillips Screwdriver

**

  • Level

Project Overview

IMPORTANT!: Please read this entire document before attempting assembly.

  1. Select TV Screws and Spacer
  2. Select Spacers for Irregular TVs
  3. Attach TV Brackets
  4. Remove Covers
  5. Remove Arm
  6. Attach Ratchets
  7. Mount Wall plate
  8. Thread Straps
  9. Mount Arms
  10. Install Covers
  11. Hang TV
  12. Level TV
  13. Finalize Adjustments
  14. Manage Cables
  15. Adjust Arm Tension
  16. Remove Straps

Select TV Screws and Spacers

A–G Select Screws

The back of your TV has 4 screw holes in a square or rectangular pattern. This is where the mount will attach to your TV. Kanto provides several sizes and lengths of screws. This guide will help you select the right screws for your TV. You will only use 4 of the provided screws to attach your TV – the rest are not needed.
Select TV Screws and Spacers

H–I Select Spacers

Plastic spacers are also provided in 2 thicknesses to allow the mount to work with curved TVs, and TVs that have recessed mount holes, protrusions, or inputs in the way. They can also be used to prevent the TV screws from going too deep and damaging your TV. You may not need spacers for your TV.
Select TV Screws and Spacers

Select Spacers for Irregular TVs

Select Spacers for Irregular TVs
Spacers can be used to provide clearance around protrusions on the back of your TV, or to accommodate a curved TV. You may need to use longer screws.

Attach TV Brackets

WARNING
Do not lay the TV face down on its front. Use a wall or TV stand.
Attach TV Brackets

cont’d

Attach TV Brackets
3.5
Attach TV Brackets
Attach TV Brackets

Remove Covers

Remove Covers

Remove Arms

Remove Arms

Attach Ratchets

Attach Ratchets

Mount Wallplate

Mount Wallplate

Thread Straps

Thread Straps

Mount Arms

Mount Arms

Install Covers

Install Covers

Hang TV

Hang TV

Level TV

Level TV

Finalize Adjustments

Finalize Adjustments

Manage Cables

Manage Cables

Adjust Arm Tension (Optional)

Adjust Arm Tension \(Optional\)

Remove Straps

Remove Straps
Adri Product

kantoaudio.com
Kanto Audio
@kantoaudio
Kanto Solutions
Social Media iconkantoaudio
Kanto Living

Limited Warranty to Original Purchaser

Kanto Living Inc. (Kanto) warrants the equipment it manufactures to be free from defects in material for the limited warranty period of 5 years.
If equipment fails because of such defects and Kanto is notified within 5 years from the date of  shipment with proof of original invoice frogman authorized reseller, Kanto will, at its option, provide replacement parts or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications. Any replacement parts or replacement units are warranted for 90 days from the day of reshipment to the original purchaser.
Customers will be responsible for obtaining a Return Authorization Number and paying shipping costs to return product to a Kanto location or authorized depot. If the equipment is covered under the warranty provisions above, Kanto will replace parts or provide a replacement unit, and be responsible for shipping costs to the customer. Please keep the original packaging to prevent damage to the product during shipping. Insuring your shipment is also recommended.
The information in the manual has been carefully checked and is believed to be accurate. However, Kanto assumes no responsibility for any inaccuracies that may be contained in the manual. In no event will Kanto be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect in the equipment, even if advised of the possibility of such damages. This warranty is in lieu of all other warranties expressed or implied, including without limitation, any implied warranty, including any warranty of merchantability and fitness for any particular purpose, all of which are expressly disclaimed.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals