kanto SB200 Sound Bar Mount User Manual
- June 4, 2024
- Kanto
Table of Contents
- kanto SB200 Sound Bar Mount
- Supplied Parts and Hardware
- Supplied Parts and Hardware
- Configurations
- Above a Free Standing TV
- Above a Wall Mounted TV
- Below a Wall Mounted TV
- Wall Mounted
- Fastening Types
- Dual Lock Mount
- Bottom Screw Mount Support
- Rear Screw Mount Support
- Keyhole Mount
- References
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
kanto SB200 Sound Bar Mount
Thank you for choosing Kanto
Read these instructions fully before assembly and installation. If you do not
understand these directions, or have any doubts about the safety of the
installation, please consult a qualified installation contractor. Make sure
there are no defective or missing parts. Do not use defective parts. Kanto
cannot be liable for property damage or injury caused by incorrect mounting,
incorrect assembly, lifting or incorrect use of this product. If there is
hardware missing, or if you are uncertain whether a part is defective, please
contact Kanto directly using one of the methods below.
CAUTION
The maximum loading weight is 22 lb (10 kg). This mount is intended for use
only with the maximum weights indicated. Use with products heavier than the
maximum weights indicated may result in instability causing possible injury.
The surface you plan to affix the Kanto mount to must be able to support more
than 5 times the weight of the soundbar and the mount combined. Do not use
this product for any purpose other than to mount a soundbar as outlined in
this manual. Improper installation may cause damage to your equipment or
serious injury. Consult a qualified installation contractor if you are unsure
about your installation.
See installation video online at: www.kantomounts.com/resources
Supplied Parts and Hardware
Supplied Parts and Hardware
-
Configurations
Configurations -
Above a Free-Standing TV
-
Above a Wall-Mounted TV
-
Below a Wall Mounted TV
-
Wall-Mounted
-
Fastening Types
Types de fixation -
Dual Lock Mount
-
Bottom Screw Mount
-
Rear Screw Mount
-
Keyhole Mount
IMPORTANT!: Please read this entire document before attempting assembly.
If you have any problems or difficulties while following these instructions,
please contact Kanto directly:
Email: support@kantoliving.com
Toll Free: US & Canada:
1-888-848-2643
Configurations
This mount can be used in several configurations. Choose the configuration that suits your application.
Choose a Fastening Type above and follow the assembly instructions on that page.
Above a Free Standing TV
Above a Wall Mounted TV
Below a Wall Mounted TV
Wall Mounted
Wood Stud Wall
Each lag bolt must be located in the middle of a wood stud.
Concrete Wall
Each lag bolt must be used with an included concrete anchor (R)
CAUTION / ATTENTION / PRECAUCIÓN
Make sure the supporting surface will support the load limits outlined in the
caution on page two. Tighten lag bolts (P) until the wall plate is snug
against the wall. Do not over tighten the lag bolts (P). Each lag bolt must be
located in the middle of a wood stud.
CAUTION / ATTENTION / PRECAUCIÓN
Make sure the concrete or brick wall is at least 4” thick. Make sure the
anchor is seated completely flush with the concrete surface even if there is
another layer of material, such as drywall. If drywall is over 5/8” thick,
custom lag bolts must be used. Concrete must be a minimum of 2000 psi in
density.
Fastening Types
This mount can be used with most soundbars. Choose the hardware that matches your soundbar.
Choose a Fastening Type above and follow the assembly instructions on that page.
Dual Lock Mount
Bottom Screw Mount Support
May need to purchase a soundbar manufacturer recommended screw.
Rear Screw Mount Support
May need to purchase a soundbar manufacturer recommended screw.
Keyhole Mount
- kantoaudio.com
- Kanto Audio
- Kanto Audio
- @kantoaudio
- Kanto Living
Limited Warranty to Original Purchaser
Kanto Living Inc. (Kanto) warrants the equipment it manufactures to be free
from defects in material for the limited warranty period of 5 years.
If equipment fails because of such defects and Kanto is notified within 5
years from the date of shipment with proof of original invoice from an
authorized reseller, Kanto will, at its option, provide replacement parts or
replace the equipment, provided that the equipment has not been subjected to
mechanical, electrical, or other abuse or modifications. Any replacement parts
or replacement units are warranted for 90 days from the day of reshipment to
the original purchaser. Customers will be responsible for obtaining a Return
Authorization Number and paying shipping costs to return product to a Kanto
location or authorized depot. If the equipment is covered under the warranty
provisions above, Kanto will replace parts or provide a replacement unit, and
be responsible for shipping costs to the customer. Please keep the original
packaging to prevent damage to the product during shipping. Insuring your
shipment is also recommended. The information in the manual has been carefully
checked and is believed to be accurate. However, Kanto assumes no
responsibility for any inaccuracies that may be contained in the manual. In no
event will Kanto be liable for direct, indirect, special, incidental, or
consequential damages resulting from any defect in the equipment, even if
advised of the possibility of such damages. This warranty is in lieu of all
other warranties expressed or implied, including without limitation, any
implied warranty, including any warranty of merchantability and fitness for
any particular purpose, all of which are expressly disclaimed