Kanto Living Full Motion Wall Mount [PDX680, PDX680W] User Manual
- June 2, 2024
- Kanto
Table of Contents
User Manual
FULL MOTION FLAT PANEL TV MOUNT
SUPPORT ARTICULÉ POUR TV D’ÉCRAN PLAT
MONTAJE ARTICULADO PARA TV DE PANTALLA PLANA
English
Thank you for choosing a Kanto Living full motion wall mount. The PDX680 is
designed to mount a VESA-compliant television weighing up to 125 lbs (57 kg),
extend 24” from your wall, sit less than 2” from the wall when fully
compressed, pan left and right up to 85º (depending
on TV size), and tilt your TV +15º / –3º. You can also adjust the horizontal
level ±2°.
Read these instructions fully before assembly and installation of this mount.
If you do not understand these directions, or have any doubts about the safety
of the installation, please consult a qualified installation contractor. Make
sure there are no defective or missing parts. Do
not use defective parts. Kanto cannot be liable for property damage or injury
caused by incorrect mounting, incorrect assembly, lifting or incorrect use of
this product. If there is hardware missing, or if you are uncertain whether a
part is defective, please contact Kanto directly using one of the methods
below.
CAUTION
The maximum loading weight is 125 lbs (57 kg). This wall mount is intended for
use only with the maximum weights indicated. Use with products heavier than
the maximum weights indicated may result in instability causing possible
injury. The wall you plan to affix the Kanto
mount to must be able to support more than 5 times the weight of the
television and the wall mount combined. Do not use this product for any
purpose other than to mount a flat panel TV on a vertical surface as outlined
in this manual. Improper installation may cause damage
to your TV or serious injury. This product should not be mounted on steel stud
walls or cinder block walls. Consult a qualified installationcontractor if
you are unsure about the type of wall you may have.
French
Thank you for choosing a Kanto Articulating Flat Panel TV Mount. The PDX680 is
designed to mount a VESA suitable TV weighing up to 125 lbs (57 kg), extend
nearly 24 “from your wall, rest within 2” of the wall when it is fully
compressed, rotate left and right up to 85 ° (depending on the size of your
TV), and tilt your TV + 15º / -3º. You can also adjust the horizontal level ±
2 °.
Read these instructions completely before mounting and installing this
bracket. If you do not understand these instructions, or have doubts about the
safety of the installation, please consult a qualified installer. Make sure
there are no defective parts or missing. Do not use defective parts. Kanto
cannot be held responsible for any property damage or injuries caused by
improper assembly, improper assembly, or improper handling or use of this
product. materials that you are missing, or if you are unsure if any material
is defective, please contact Kanto directly through one of the methods below.
Email: support@kantoliving.com
Toll-Free: US & Canada: 1-888-848-2643
| UK: +44 800086999
WARNING The maximum loading weight is 125 lbs (57 kg). This wall mounting
system is
intended for use only with the maximum weights indicated. Use with products
heavier than the
maximum weights indicated may cause instability and injuries. This product
should not be mounted on steel stud walls or
concrete block walls. Consult a qualified installer if you are not sure what
type of wall you might have. We make every
effort to ensure that all necessary materials are included. The wall that you
plan to install the Kanto bracket must be able to
support more than 5 times the weight of the television and the system.
combined wall mounting. Do not use this product for any purpose
other than mounting a flat screen TV on a vertical surface, such as explained
in this manual. Improper installation can cause damage
to your TV or serious injury.
Spanish Thank you for choosing the Kanto Full Motion Wall Mount.
The PDX680 has been designed to mount a television VESA compliant, with a
maximum weight of 57 kg (125 lbs),
with a maximum extension of 61cm (24 ”) from the wall, allowing rotation to
left and right with an angle of up to 85 ° and a TV tilt of ± 15 ° / –3 °.
You can also adjust the horizontal level ± 2 °. Please read these instructions
completely before assembling and installing
this bracket. If you do not understand these instructions, or have questions
Regarding installation safety, please consult a qualified installation
contractor. Make sure there are no parts defective or missing. Do not use
defective parts. Kanto cannot be held
liable for property damage or injury caused by improper assembly, incorrect
assembly, lifting, or improper use of this
product. If hardware is missing or if you are not sure If the part is
defective, contact Kanto directly using one of the
following methods. Email: support@kantoliving.com Toll Free: US & Canada:
1-888-848-2643 | UK: +44 800086999
CAUTION The maximum load weight is 57 kg (125 lbs). This wall mount is
only intended
for installations not exceeding the maximum weight indicated. If the weight of
the product
exceeds that specified, it could result in an unstable installation, which it
could cause injury. This product should not be mounted on steel
stud walls or concrete block walls. See to a qualified installation contractor
if you are unsure of your
wall type. The wall you plan to attach the mount to Kanto must be able to
support 5 times the weight of the TV itself
and the wall mount combined. Do not give this product uses other than mounting
a flat screen TV on a vertical surface as
indicated in this manual. A Improper installation could cause damage to your
TV or serious injury. Supplied Parts and Hardware / Matériel et les pièces
fournies Partes suministradas y materiales WARNING/ AVERTISSEMENT/ PRECAUCIÓN Do not
lay the TV face down on its front. Use a wall or TV stand. Ne posez pas la
téléviseur sur son front. Utilisez un mur ou un support de téléviseur. No deje
el televisor posado sobre su cara de cristal. Utilice un soporte depared o de
TV.
3A. Wood Stud Wall / Wooden Stud Wall / Pared de
vigas de madera
The mounting height depends on![Kanto Living Full Motion Wall Mount](https://manuals.plus/wp-content/uploads/2020/12/Kanto-Living-Full-Motion-Wall-Mountt_6-300x225.png)
TV size, viewing position,
and personal preference.
The hauteur du support varie
selon la taille du téléviseur,
display position et depréférence
personal
The height at which it is installed
mounting depends on![The mounting height depends on TV size, viewing position, and personal preference. The hauteur du support varie selon la taille du téléviseur, display position et depréférence personal The height at which it is installed mounting depends on TV size, display position, and personal preferences.](https://manuals.plus/wp-content/uploads/2020/12/Kanto-Living-Full-Motion-Wall-Mountt_7-300x190.png)
TV size,
display position, and
personal preferences.
![Kanto Living Full Motion Wall Mount](https://manuals.plus/wp-content/uploads/2020/12/Kanto-Living-Full-Motion-Wall-Mountt_8-300x278.png)
**3B. Brick or Concrete / Brick or Concrete /
Ladrillo u Hormigón**
Mount height depends on
TV size, viewing position,
and personal preference.
The hauteur du support varie
![Kanto Living Full Motion Wall Mount](https://manuals.plus/wp-content/uploads/2020/12/Kanto-Living-Full-Motion-Wall-Mountt_9-300x139.png)
selon la taille du téléviseur,
the position of visualization
et depréférence
personnelle
The height at which it is installed
mounting depends on
TV size,
display position, and
personal preferences.
![Kanto Living Full Motion Wall Mount](https://manuals.plus/wp-content/uploads/2020/12/Kanto-Living-Full-Motion-Wall-Mountt_10-300x263.jpg)
![Kanto Living Full Motion Wall Mount](https://manuals.plus/wp-content/uploads/2020/12/Kanto-Living-Full-Motion-Wall-Mountt_11-237x300.png)![Kanto Living Full Motion Wall Mount](https://manuals.plus/wp-content/uploads/2020/12/Kanto-Living-Full-Motion-Wall-Mount_12-234x300.png)
![Kanto Living Full Motion Wall Mount](https://manuals.plus/wp-content/uploads/2020/12/Kanto-Living-Full-Motion-Wall-Mount_13-230x300.png)
7. Cable Management / Cable management / Cable management Limited Warranty to Original
Purchaser Kanto Living Inc. (Kanto) warrants the equipment it manufactures
to be
free from defects in material and workmanship for the limited warranty period
of 5 years. If equipment fails because of such defects and Kanto is notified
within
5 years from the date of shipment with proof of original invoice from an
authorized reseller, Kanto will, at its option, provide replacement
parts or replace the equipment, provided that the equipment has not been
subjected to mechanical, electrical, or other abuse or modifications.
Any replacement parts or replacement units are warranted for 90 days from the
day of reshipment to the original purchaser. Customers will be responsible for
obtaining a Return Authorization Number
and paying shipping costs to return product to a Kanto location or authorized
depot. If the equipment is covered under the warranty
provisions above, Kanto will replace parts or provide a replacement unit, and
be responsible for shipping costs to the customer.
Please keep the original packaging to prevent damage to the product
during shipping. Insuring your shipment is also recommended. The information
in the manual has been carefully checked and is believed
to be accurate. However, Kanto assumes no responsibility for any inaccuracies
that may be contained in the manual. In no event will
Kanto be liable for direct, indirect, special, incidental, or
consequential damages resulting from any defect, even if advised of the
possibility
of such damages. This warranty is in lieu of all other warranties expressed or
implied, including without limitation, any implied
warranty or merchantability or fitness for any particular purpose,
all of which are expressly disclaimed.
Garantie Limitée à l’Acheteur Initial Kanto Living Inc. (Kanto) garantit l’ensemble des produits qu’il fabrique contre tout défaut matériel ou de main d’oeuvre pendant toute la période de garantie limitée de 5 ans. En cas de panne du matériel résultant de tels défauts et si Kanto en est informé avant 5 ans suivant la date d’envoi avec présentation de la facture originale délivrée par un revendeur agréé, Kanto s’engage, à sa discrétion, à fournir des pièces de remplacement ou à substituer le matériel, à condition que le système mécanique ou électrique du matériel en question n’ait été soumis à aucune modification et aucun abus. Toute pièce de remplacement ou tout appareil de substitution sera garanti pendant 90 jours à partir de la date d’envoi vers l’acheteur d’origine. Les clients seront chargés d’obtenir un numéro d’autorisation de renvoi et de payer les frais de retour du produit à un entrepôt de Kanto ou un centre agréé. Si le matériel est couvert en vertu de la garantie énoncée précédemment, Kanto s’engage à fournir des pièces de remplacement ou substituer le matériel et à assumer les frais d’envoi vers le client. Veillez à conserver l’emballage d’origine afin d’éviter tout dommage au cours du transport. Il est également recommandé d’assurer votre colis. Les renseignements du manuel ont été soigneusement contrôlés et sont considérés comme exacts. Kanto décline toutefois toute responsabilité pour toute erreur contenue dans le manuel. Kanto ne pourra en aucun cas être tenu responsable de tout dommage direct, indirect, spécial, accidentel ou consécutif résultant d’un défaut, même si l’éventualité de tels dommages a été prévenu. Cette garantie annule et remplace toute autre garantie expresse ou tacite, incluant sans limitations, toute garantie implicite ou relative à quelque valeur commerciale ou aptitude que ce soit, toutes expressément déclinées par la présente.
Garantía Limitada al Comprador Original Kanto Living Inc. (Kanto) garantiza
que el equipo que fabrica está libre de defectos en materiales y mano de obra por el período
de garantía limitada de 5 años. Si el equipo falla debido a tales defectos y se notifica a Kanto
dentro de los 5 años a partir de la fecha de envío con un comprobante de la factura original de un
distribuidor autorizado, Kanto proporcionará, a su elección, piezas de repuesto o reemplazará el
equipo, siempre y cuando el equipo no haya sido sometido a abuso o modificaciones mecánicas,
eléctricas u otras. Cualquier pieza de repuesto o unidad de reemplazo está garantizada por 90 días
a partir del día de reenvío al comprador original. Los compradores serán responsables de obtener
un número de autorización de devolución y pagar los costos de envío para devolver el producto a
una ubicación o depósito autorizado de Kanto. Si el equipo está cubierto por las disposiciones
de garantía anteriores, Kanto reemplazará las piezas o proporcionará una unidad de reemplazo
y será responsable de los costos de envío al cliente. Guarde el empaque original para evitar daños
al producto durante el envío. También se recomienda asegurar su envío. La información en
el manual ha sido cuidadosamente revisada y se cree que es precisa. Sin embargo, Kanto no
asume ninguna responsabilidad por cualquier inexactitud que pueda contener el manual. En ningún
caso Kanto será responsable de los daños directos, indirectos, especiales, incidentales o consecuentes
que resulten de cualquier defecto, incluso si se informa de la posibilidad de dichos daños. Esta garantía sustituye a todas las demás garantías explícitas o implícitas, incluidas, entre otras, cualquier garantía
implícita de comerciabilidad o idoneidad para un fin determinado, todas las cuales se rechazan
expresamente.
Read More About This Manual & Download PDF:
Kanto Living Full Motion Wall MountManual Optimized
Kanto Living Full Motion Wall MountManual Original