kanto MTP100 Rolling TV Stand User Manual

May 15, 2024
Kanto

kanto MTP100 Rolling TV Stand

kanto-MTP100-Rolling-TV-Stand-product

Product Information

Specifications:

  • Brand: Kanto
  • Model: MTP100
  • Weight Capacity: 200 lb (91kg)
  • VESA Compliant

Product Usage Instructions

  1. Assemble Legs
    Follow the instructions provided to assemble the legs of the product.

  2. Select Spacers
    Choose the appropriate spacers based on your TV’s requirements, especially for curved TVs or those with recessed mount holes.

  3. Configure Mount Height
    Adjust the mount height to your desired level using the instructions provided.

  4. Use VESA Pattern
    Ensure to use the correct holes and slots that align with your TV’s VESA pattern for proper mounting.

FAQ:

  • Q: What is the warranty period for Kanto products?
    A: Kanto offers a limited warranty period of 5 years from the date of purchase. The warranty is valid in the country of purchase.

  • Q: Is the warranty transferable for second-hand purchases?
    A: Yes, the limited warranty is fully transferable for second-hand purchases. A copy of the original receipt is required to establish the purchase date.

  • Q: How can I obtain a Return Authorization Number for a product return?
    A: Customers can obtain a Return Authorization Number through Customer Support by contacting support@kantoliving.com. Customers are responsible for return shipping costs unless otherwise prohibited.

  • Q: What is the customer support contact information?
    A: For customer support inquiries, you can reach out to support@kantoliving.com or call toll-free at 1-888-848-2643.

ROLLING TV STAND

kanto-MTP100-Rolling-TV-Stand-fig- \(1\)

Thank you for choosing Kanto
Read these instructions fully before assembly and installation. If you do not understand these directions, or have any doubts about the safety of the installation, please consult a qualified installation contractor. Make sure there are no defective or missing parts. Do not use defective parts. Kanto cannot be liable for property damage or injury caused by incorrect mounting, incorrect assembly, lifting or incorrect use of this product. If there is hardware missing, or if you are uncertain whether a part is defective, please contact Kanto directly using one of the methods below.

CAUTION
The maximum loading weight is 200 lb (91 kg). This rolling TV stand is intended for use only with the maximum weights indicated. Use with products heavier than the maximum weights indicated may result in instability causing possible injury. The floor you plan to use the Kanto mount on must be able to support more than 5 times the weight of the television and the mount combined. Do not use this product for any purpose other than to mount a VESA-compliant TV as outlined in this manual. Improper installation may cause damage to your TV or serious injury. Do not install this product if you are unsure what kind of floor you may have or the load it can support. You are advised to consult a qualified installation contractor before installing this product.

Supplied Parts and Hardware

kanto-MTP100-Rolling-TV-Stand-fig- \(2\)

Required Tools

Phillips Screwdriver

Project Overview

  1. Select TV Screws and Spacers
  2. Select Spacers for Irregular TVs
  3. Attach TV Brackets
  4. Assemble Legs
  5. Configure Mount Height
  6. Assemble Shelf
  7. Assemble TV Stand
  8. Mount TV
  9. Assemble and Attach the Webcam Shelf

IMPORTANT:
Please read this entire document before attempting assembly.

Installation Instruction

Select TV Screws and Spacers

A-E Select Screws
The back of your TV has 4 screw holes in a square or rectangular pattern. This is where the mount will attach to your TV. Kanto provides several sizes and lengths of the provided screws to attach your TV – the rest are not needed.

G Select Spacers
Plastic spacers are also provided in 1 thickness to allow the mount to work with curved TVs and TVs that have recessed mount holes, protrusions, or inputs in the way. They can also be used to prevent the TV screws from going too deep and damaging your TV. You may not need spacers for your TV.

Select Spacers for Irregular TVs

kanto-MTP100-Rolling-TV-Stand-fig- \(6\)

Spacers can be used to provide clearance around protrusions on the back of your TV or to accommodate a curved TV. You may need to use longer screws.

Attach TV Brackets

WARNING
Do not lay the TV face down on its front. Use a wall or TV stand.

kanto-MTP100-Rolling-TV-Stand-fig- \(7\)

Assemble Legs

kanto-MTP100-Rolling-TV-Stand-fig- \(8\)

kanto-MTP100-Rolling-TV-Stand-fig- \(9\)

Configure Mount Height

kanto-MTP100-Rolling-TV-Stand-fig- \(10\)

Assemble Shelf

kanto-MTP100-Rolling-TV-Stand-fig- \(11\)

Assemble TV Stand

kanto-MTP100-Rolling-TV-Stand-fig- \(12\)kanto-
MTP100-Rolling-TV-Stand-fig- \(13\)

Mount TV

kanto-MTP100-Rolling-TV-Stand-fig- \(14\)kanto-
MTP100-Rolling-TV-Stand-fig- \(15\)

Assemble and Attach the Webcam Shelf

kanto-MTP100-Rolling-TV-Stand-fig- \(16\)

Other Products

kanto-MTP100-Rolling-TV-Stand-fig- \(17\)

Limited Warranty

Kanto Living Inc. (Kanto) warrants the equipment it manufactures to be free from defects in material or workmanship for a limited warranty period of 5 years. This warranty is valid in the country of purchase.

If you are experiencing an issue with your mount and Kanto is notified within the warranty period listed above from the date of purchase with proof of original receipt from an authorized reseller, Kanto will, at its option provide replacement parts, repair or replace the equipment, and be responsible for return shipping to the customer, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications. Any replacement parts, and repaired or replaced equipment are covered by the full warranty of the original purchase. The maximum liability of Kanto shall not exceed the actual purchase price.

If you purchased a Kanto product second-hand the limited warranty is fully transferable provided that you can furnish a copy of the original receipt to establish the purchase date. Customers will be responsible for obtaining a Return Authorization Number through Customer Support and are responsible for return shipping costs to a Kanto location or authorized depot unless otherwise prohibited.

The information in the manual has been carefully checked and is believed to be accurate. However, Kanto assumes no responsibility for any inaccuracies that may be contained in the manual. In no event will Kanto be liable for direct, indirect, special, incidental, or consequential damages resulting from any defect in the equipment, even if advised of the possibility of such damages? This warranty is instead of all other warranties expressed or implied, including without limitation, any implied warranty, including any warranty of merchantability and fitness for any particular purpose, all of which are expressly disclaimed.

If you have any problems or difficulties while following these instructions, please contact Kanto directly:

Contact Information

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals