CX W01-P1-12A RF LED Light Dimmer Receiver Instruction Manual
- August 29, 2024
- Support
Table of Contents
CX W01-P1-12A RF LED Light Dimmer Receiver
- WiFi Smart LED Controller is our newly developed LED controller series, including DIM, Dual White, RGB, RGBW, and RGBCCT 5 kinds.
- It works on the Tuya Smart Life APP for smartphone control and 4G long-distance control and works with a 2.4GHz RF remote controller. It also supports third-party voice control.
Features
Parameters
Tuya Wifi RF LED Dimmer
- Model: CX-W01-P1-12A
- Work Voltage: 12-24V DC
- Output Channel: 1
- Output: 6A/Port, Total 12A Max
- Max. Power: 144W(12V), 288W(24V)
- Size: L75W36H16.5mm
- Match Remote: LM007, LM087, RC01RF, RC01RFB
Connection Diagram
Input Voltage=Output Voltage
Tuya Wifi RF LED CCT Controller
- Model: CX-W01-P2-12A
- Work Voltage: 12-24V DC
- Output Channel: 2
- Output: 6A/Port, Total 12A Max
- Max. Power: 144W(12V), 288W(24V)
- Size: L75W36H16.5mm
- Match Remote: RC02RF, RC02RFB, WR01RF
Connection Diagram:
Input Voltage=Output Voltage
Tuya Wi fiRF RGB Controller
- Model: CX-W01-P3-12A
- Work Voltage: 12-24V DC
- Output Channel: 3
- Output: 6A/Port, Total 12A Max
- Max. Power: 144W(12V), 288W(24V)
- Size: L75W36H16.5mm
- Match Remote: RCO3RF, RCO3RFB, RC03RF, RCO3RFB, WRO2RF
Connection Diagram:
Input Voltage=Output Voltage
Tuya Wi fiRF RGBW Controller
- Model: CX-W01-P4-12A
- Work Voltage: 12-24V DC
- Output Channel: 4
- Output: 4A/Port, Total 12A Max
- Max. Power: 144W(12V), 288W(24V)
- Size: L75W36H16.5mm
- Match Remote: RC03RF, RC03RFB, RC03RF, RCO3RFB, WRO2RF
Connection Diagram:
Input Voltage=Output Voltage
Tuya Wi fiRF RGBCCT Controller
- Model: CX-W01-P5-12A
- Work Voltage: 12-24V DC
- Output Channel: 5
- Output: 4A/Port, Total 12A Max
- Max. Power: 144W(12V), 288W(24V)
- Size: L75W36H16.5mm
- Match Remote: RC03RF, RC03RFB, RC03RF, RC03RFB, WR02RF
- Connection Diagram:
Input Voltage=Output Voltage
Compatible Remote Controller
- Compatible with these remote controls (Purchased separately).
- For more details, pls read the remote instructions.
Signal transmitting
- One strip controller can transmit the signals from the remote control to another controller within 30m, as long as there is a strip controller within 30m, the remote control distance can be limitless.
Mode synchronization
- Different controllers can work synchronously when they are started at different times, controlled by the same remote, under the same dynamic mode, and with the same speed.
Smartphone APP WiFi Control Instruction
- Download and install [Smart Life] or [Tuya Smart] APP Search for [Smart Life] in the Apple or Google store or scan the following QR code to download and install the app.
- Please click the Register” button to create an account while using it for the first time, Log in directly if you already have an account.
- Link to Smartphone &Reset Devices
- Make sure the Smartphone is working on the WLAN network.
- Long press the “SET” button, or switch ON-OFF power 4 times (ON-OFF-ON-OFF-ON-OFF-ON), when the white light blinks, the device comes into a link or reset mode.
- Open the sign-in APP, it will discover the devices automatically, (If it’s not discovered, please click”+” on the top right corner, and select “add new device” manually) follow the steps and complete the linking;
- Added devices will be displayed on the homepage after linking successfully, then click the device and go into the control interface for more operation.
Note: Please complete the linking within 3 minutes, after 3 minutes, the devices will not on linking mode, you have to do the above “2)” step, and link again.
Bluetooth Control
While the WiFi router is disconnected, you can open the bluetooth on your smartphone and control the linked device directly at a shorter distance(within 20M).
Switch Bluetooth Control Steps:
- Complete the network configuation of the devices on your smartphone first.
- Disconnect the WiFi router connected to the device, close the WiFi signal and 4G signal on your smartphone, then open the bluetooth, wait for some minutes to control.
Attention
- Please check whether the input voltage of the constant voltage power supply is under the controller, and please check the connection of both the cathode and anode.
- The working Voltage is DC12~24V, the controller will be broken if the voltage is higher than 24V.
- Non-professional users cannot dismantle the controller directly, otherwise, it may cause fire and electric shock.
- The working temperature(Ta) is 25-45 C; Do not use the device to direct sunlight, moisture, and other high-temperature areas.
- Please do not use a controller around the mental area and high magnetic field, otherwise, it will badly affect the control distance.
- When the device loads to 12A, the wire diameter must be over 1.5mm.
- When the device loads over 10A, the connecting cable must be shorter than 40cm from the DC port to the LED strip.
- Please install the device in a good dissipation area.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>