BONTEC CT128 TV Wall Bracket Mount Installation Guide
- June 14, 2024
- BONTEC
Table of Contents
INSTALLATION MANUAL
TV Wall Mount
Model: CT128
Thank you for choosing our products.
**** UNPACKING INSTRUCTIONS
- Carefully open the carton, remove contents and lay out on cardboard or other protective surface to avoid damage.
- Check package contents against the Supplied Parts List in the next page to assure that ail components were received undamaged. Do not use damaged or defective parts.
- Carefully read all instructions before attempting installation.
**** IMPORTANT SAFETY INFORMATION
Install and operate this device with care. Please read this instruction before
beginning the installation, and carefully follow all instructions contained
herein.
Use proper safety equipment during installation.
Please call a qualified installation contractor for help if you:
- lf you don’t understand these directions or have any doubts about the safety of the installation.
- lf you are uncertain about the nature of your wali, consult a qualified instailation contractor.
Do not use this product for any purpose or in any configuration not explicitly specified in this instruction. We hereby disclaim any and ail liability for injury or damage arising from incorrect assembly, incorrect mounting, or incorrect use of this product.
WARNING | CAUTION! |
---|
This TV mount must be securely attached to the vertical wall. If the mount is
not properly installed it may fall, resulting in possible injury and/or
damage.
Tools Required| ● 4mm Drill Bit
● Phillips Screwdriver| ● 10mm Masonry Bit
● Stud Finder| ● Wrench or Socket Set
● Carpenter’s Level
---|---|---|---
Note: The mounting components and hardware supplied in this package are not designed for installations to walls with steel studs or to cinder block walls. If the hardware you need for your installation is not included, please consult your local hardware store for proper mounting hardware for the application.
Supplied Parts
Before getting started, let’s make sure this mount is perfect for you!
-
Is your TV VESA equal to/greater than 75x75mm and equal to/less than 200x200mm?Yes — Perfect!
No — This mount is NOT compatible. -
What is your wall made of?
CAUTION:
DO NOT install into drywall alonDrywall with wood studs?Solid concrete wall?
Step 1 lnstall VESA Plate to the back of TV
For Flat screen TV
For Curved TV
Step 2 Mounting the Wall Plate to the Wall
Brick or Concrete Wall
Wood Studs Wall
Step 3 Lift and hang TV with brackets onto wall bracket.
Step 4
Product dimensions:
Documents / Resources
|
BONTEC CT128 TV Wall Bracket
Mount
[pdf] Installation Guide
CT128, CT128 TV Wall Bracket Mount, TV Wall Bracket Mount, Wall Bracket Mount,
Bracket Mount, Mount
---|---