VTech 80-185600 Baby On-The-Moove Activity Bar User’s Manual

VTech 80-185600 Baby On-The-Moove Activity Bar

Dear Parent,

Ever notice the look on your baby’s face when they learn something new through their own discovery? These self-accomplished moments are a parent’s greatest reward. To help fulfill them, VTech® created the Infant Learning® series of toys.

These unique interactive learning toys directly respond to what children do naturally – play! Using innovative technology, these toys react to baby’s interactions, making each play experience fun and unique as they learn age- appropriate concepts like first words, numbers, shapes, colors and music. More importantly, VTech®’s Infant Learning® toys develop babies’ mental and physical abilities by inspiring, engaging, and teaching.

At VTech®, we know that a child has the ability to do great things. That’s why all of our electronic learning products are uniquely designed to develop a child’s mind and allow them to learn to the best of their ability. We thank you for trusting VTech® with the important job of helping your child learn and grow!

Sincerely,

Your friends at VTech®

To learn more about VTech® toys, visit vtechkids.com

INTRODUCTION

Thank you for purchasing the VTech® On-the-Moove Activity BarTM learning toy. The VTech® On-the-Moove Activity BarTM is a cute farm-themed toy bar for babies on the go. Press the button on the chunky cow character or activate the motion sensor by rocking and spinning the cow to hear a variety of playful responses. The bird comes with a textured ring that is easy for baby to grab and swing while the ladybug has a baby-safe mirror for peek-a-boo fun!

INCLUDED IN THIS PACKAGE

• One VTech® On-the-Moove Activity BarTM learning toy
• One user’s manual

WARNING: All packing materials, such as tape, plastic sheets, wire ties and tags are not part of this toy, and should be discarded for your child’s safety.

NOTE: Please keep this instruction manual as it contains important information.

1. Turn the packaging lock counter-clockwise several times.
2. Pull out and discard the packaging lock.

GETTING STARTED

BATTERY INSTALLATION

1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the cow. Use a screwdriver to loosen the screw.
3. Install 2 new “AAA” batteries following the diagram inside the battery box. (The use of new alkaline batteries is recommended for maximum performance.)
4. Replace the battery cover and tighten the screw to secure it.

BATTERY NOTICE

• Install batteries correctly observing the polarity (+,-) signs to avoid leakage.
• Do not mix old and new batteries.
• Do not use batteries of different types.
• Remove batteries from the equipment when the unit will not be used for an extended period of time.
• Do not dispose of batteries in a fire.
• Do not attempt to recharge ordinary batteries.
• The supply terminals are not to be short-circuited.
• Only batteries of the same and equivalent type as recommended are to be used.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.

WARNING: With the VTech® On-the-Moove Activity Bar™safety comes first. To ensure your child’s safety, adult assembly is required.Never use toy bar as a handle. Do not use in moving vehicles. Do not add additional strings or straps. Possible entanglement or strangulation injury when attached to crib/cot or playpen/play yard. Do not attach to crib/cot or playpen/play yard.

PRODUCT FEATURES

1. ON/OFF/VOLUME CONTROL SWITCH
   To turn the unit ON, slide the ON/ OFF/VOLUME CONTROL SWITCH to the LOW VOLUME ( ) or the HIGH VOLUME ( ) position. To turn the unit OFF, slide the ON/OFF/VOLUME CONTROL SWITCH to the OFF ( ) position.

2. INFANT CARRIER ATTACHMENT
   To attach the toy bar to an infant carrier, position the toy bar so that the animals are facing baby and are within reach. Secure the two straps around the infant carrier handle. Wrap the elastic straps around the infant carrier handle so the toy bar is attached tightly and securely to the infant carrier handle.

3. AUTOMATIC SHUT-OFF
   To preserve battery life, the VTech® On-the-Moove Activity BarTM will automatically power down after approximately 45 seconds without input. The unit can be turned on again by pressing any button. Activating the motion sensor will not turn the unit back on.

ACTIVITIES

1. Slide the on/off/volume control switch to turn the unit on. You will hear a playful sound, a song, a fun phrase, and a short tune. The light will flash with the sound.
2. Press the cow button to hear fun sounds, playful phrases, songs, and playful melodies. When a melody is playing activate the motion sensor to hear fun sounds play over the melody. The light will flash with the sound.
3. Swing the cow to activate the motion sensor and hear fun sounds and playful phrases. The light will flash with the sound.

MELODY LIST

1. Boys and Girls Go Out to Play
2. Shoo Fly, Don’t Bother Me
3.  Arkansas Traveller
4. Oh! Susanna
5. Farmer in the Dell
6. Old MacDonald Had a Farm
7. Aiken Drum
8. Toyland
9. Turkey in the Straw
10. Yellow Rose of Texas
11. Buffalo Gals
12. Clementine
13. Chicken Reel
14. Pop! Goes the Weasel
15. Diddle, Diddle, Dumpling
16. Big Rock Candy Mountain
17. Happy Farmer
18. Baa, Baa, Black Sheep
19.  Hey Diddle Diddle
20. Goosey Goosey Gander

SUNG SONG LYRICS

SONG 1

• I’m a little happy cow, moo, moo, moo!
• I have two little horns on the top of my head.

SONG 2

• Birdie, birdie, do you like to sing?
• Sitting on your little round ring.

SONG 3

• Peek-a-boo, little ladybug.
• Who do you see in your little mirror?

CARE & MAINTENANCE

1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat source.
3. Remove the batteries when the unit will not be in use for an extended period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to moisture or water.

TROUBLESHOOTING

If for some reason the program/activity stops working or malfunctions, please follow these steps:

1. Please turn the unit OFF.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace it with a new set of batteries.

If the problem persists, please call our Consumer Services Department at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada, and a service representative will be happy to help you.

For information on this product’s warranty, please call our Consumer Services Department at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada.

IMPORTANT NOTE: Creating and developing Infant Learning products is accompanied by a responsibility that we at VTech® take very seriously. We make every effort to ensure the accuracy of the information, which forms the value of our products. However, errors sometimes can occur. It is important for you to know that we stand behind our products and encourage you to call our Consumer Services Department at 1-800-521-2010 in the U.S., or 1-877-352-8697 in Canada, with any problems and/or suggestions that you might have. A service representative will be happy to help you.

NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

1. THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND
2. THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.

CAN ICES-3 (B)/NMB-3(B)

Caution:  changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

PRODUCT WARRANTY

• This Warranty is applicable only to the original purchaser, is non-transferable and applies only to “VTech” products or parts. This product is covered by a 3-month Warranty from the original purchase date, under normal use and service, against defective workmanship and materials. This Warranty does not apply to (a) consumable parts, such as batteries; (b) cosmetic damage, including but not limited to scratches and dents; (c) damage caused by use with non-VTech products; (d) damage caused by accident, misuse, unreasonable use, immersion in water, neglect, abuse, battery leakage, or improper installation, improper service, or other external causes; (e) damage caused by operating the product outside the permitted or intended uses described by VTech in the owner’s manual; (f) a product or part that has been modified (g) defects caused by normal wear and tear or otherwise due to the normal aging of the product; or (h) if any VTech serial number has been removed or defaced.
• Prior to returning a product for any reason, please notify the VTech Consumer Services Department, by sending an email to vtechkids@vtechkids.com or calling 1-800-521-2010. If the service representative is unable to resolve the issue, you will be provided instructions on how to return the product and have it replaced under Warranty. Return of the product under Warranty must adhere to the following rules:
• If VTech believes that there may be a defect in the materials or workmanship of the product and can confirm the purchase data and location of the product, we will at our discretion replace the product with a new unit or product of comparable value. A replacement product or parts assumes the remaining Warranty of the original product or 30 days from the date of replacement, whichever provides longer coverage.
• THIS WARRANTY AND THE REMEDIES SET FORTH ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDITIONS, WHETHER ORAL, WRITTEN, STATUTORY, EXPRESS OR IMPLIED. IF VTECH CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES THEN TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED TO THE DURATION OF THE EXPRESS WARRANTY AND TO THE REPLACEMENT SERVICE AS DETERMINED BY VTECH IN ITS SOLE DISCRETION.
• To the extent permitted by law, VTech will not be responsible for direct, special, incidental or consequential damages resulting from any breach of Warranty.
• This Warranty is not intended to persons or entities outside the United States of America. Any disputes resulting from this Warranty shall be subject to the final and conclusive determination of VTech .

To register your product online at www.vtechkids.com/warranty

FREQUENTLY ASKED QUESTIONS

What is the VTech 80-185600 Baby On-The-Moove Activity Bar?

The VTech 80-185600 Baby On-The-Moove Activity Bar is an engaging toy designed for infants, featuring various interactive elements to entertain and stimulate young babies.

What are the dimensions of the VTech 80-185600 Baby On-The-Moove Activity Bar?

The product dimensions are 2.05 inches in length, 13.15 inches in width, and 7.4 inches in height.

How much does the VTech 80-185600 Baby On-The-Moove Activity Bar weigh?

The VTech 80-185600 weighs 9.3 ounces.

What is the item model number for the VTech Baby On-The-Moove Activity Bar?

The item model number is 80-185600.

What is the manufacturer recommended age for the VTech 80-185600 Baby On-The- Moove Activity Bar?

The VTech 80-185600 is recommended for children aged 0 to 3 years.

What type of batteries does the VTech 80-185600 Baby On-The-Moove Activity Bar require?

The toy requires 2 AAA batteries to operate.

What is the price of the VTech 80-185600 Baby On-The-Moove Activity Bar?

The VTech 80-185600 Baby On-The-Moove Activity Bar is priced at $11.99.

What is the warranty period for the VTech 80-185600 Baby On-The-Moove Activity Bar?

The warranty period for the VTech 80-185600 is 3 months.

Who is the manufacturer of the VTech 80-185600 Baby On-The-Moove Activity Bar?

The manufacturer of the VTech 80-185600 is VTech.

Why isn't my VTech 80-185600 Baby On-The-Moove Activity Bar turning on?

Ensure the batteries are properly installed and fully charged. Check the battery compartment for any corrosion or loose connections that might be preventing the toy from powering on.

What should I do if the sounds on my VTech 80-185600 Baby On-The-Moove Activity Bar are not working?

Verify that the volume is turned up and not muted. Check the batteries to ensure they have enough power. If the issue persists, inspect the speaker area for any blockages or damage.

Why are the lights on my VTech 80-185600 Baby On-The-Moove Activity Bar flickering?

Flickering lights can be caused by loose batteries or poor connections in the battery compartment. Try removing and reinserting the batteries or replacing them with fresh ones.

How can I fix the buttons if they are not responding on my VTech 80-185600 Baby On-The-Moove Activity Bar?

Ensure the batteries are fully charged and properly installed. Clean the buttons to remove any dirt or debris that might be preventing them from making proper contact. If the issue persists, it could be a problem with the internal circuitry.

What should I do if my VTech 80-185600 Baby On-The-Moove Activity Bar is making unusual noises?

Unusual noises could indicate a mechanical issue. Ensure that there are no foreign objects inside the toy. If the noise continues, it might be best to contact VTech customer support for further assistance.

Why is my VTech 80-185600 Baby On-The-Moove Activity Bar not responding to touch inputs?

Ensure the batteries are properly installed and fully charged. Clean the touch-sensitive areas to remove any dirt or debris. If the issue persists, the touch sensors might be faulty and require professional repair.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK: VTech 80-185600 Baby On-The-Moove Activity Bar User’s Manual

REFERENCE:VTech 80-185600 Baby On-The-Moove Activity Bar User’s Manual- Device.Report

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>