ZUMTOBEL E14529 Cardan LED Light Instruction Manual
- June 5, 2024
- ZUMTOBEL
Table of Contents
ZUMTOBEL E14529 Cardan LED Light
CARDAN LED
Typ-Nr. E14529, E14531, E14533, E14530, E14535, E14532, E14534,
E14536
- The servicing of the control gear in this luminaire should only be undertaken by the manufacturer or his service agent or a similarly qualified person
- The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
WARNING: Installation and commissioning may only be carried out by
authorized specialists.
Luminaire not suitable for covering with thermally insulating material.
WARNING: The luminaire is used exclusively for lighting and is to be
installed in accordance with the national installation regulations. Any other
use or installation is regarded as
“not according to instructions”.
Caution! Make sure that the luminaires and power supply units are always
disconnected from the mains supply during wiring and installation work.
Otherwise, the LED modules may be destroyed.
LDO
Durchschleifen – Looping-in (feed through)
230V
Durchschleifen – Looping-in (feed through)
ATTETION:
With thin or soft ceiling material it is recommended that ceiling reinforcing rings should be used to enlarge the bearing surface.
INSTRUCTIONS
E14529 E14530 E14533 E14535
switchDIM
Specifications subject to change without notice
Internet: http://www.Zumtobel.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>