Mounting Dream MD2268-MK TV Wall Mounts Instruction Manual
- June 3, 2024
- Mounting Dream
Table of Contents
Mounting Dream MD2268-MK TV Wall Mounts
Before getting started
Let’s make sure this mount is perfect for you!
-
Is your TV VESA equal to/greater than 75x75mm/3×3″ and equal to/less than 400x400mm/16×16″?
-
Does your TV (including accessories) weigh less than 88 LBS (40 kg)?
-
What is your wall made of?
-
Installation Tools (Not Included)
-
Safety Caution
Please read this instruction carefully before installation.- This product is designed for use in wood stud and solid concrete wall.
- DO NOT install into drywall alone.
- The wall must be capable of supporting five times the weight of the TV and mount combined.
- Do not apply this product to any purpose not indicated by Mounting Dream.
- Incorrect installation may result in product damage or body injury. Mounting Dream shall bear no responsibility for any damage or injury resulted from incorrect installation, incorrect assembly or misuse.
Attach Bracketsto TV
Parts and Hardware
WARNING: This product contains small items that could be a choking hazard
if swallowed. Before starting assembly, verify all parts are included and
undamaged.
NOTE: Not all hardware included will be used.
-
Select TV Screws
-
Need Spacer?
Yes, go to PAGE 3 I for detailed combination. -
Attach the TV Brackets
- Spacer(s), screw and washer
Tips: If you need to combine M6(e) or M8(c/f) screw with 2.5mm spacer(j), you have to remove the inner circle. - Screw and washer
- Spacer(s), screw and washer
Attach Wall Plate to Wall
For wood stud installation, follow STEP 2A
For concrete installation, follow STEP 2B on PAGE 6
Parts and Hardware
Wood Stud Installation
CAUTION: To avoid potential personal injury or property damage:
All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the
wall plate assembly. Ensure the wall plate assembly is securely fastened to
the wall before continuing on to the next step.
Solid Concrete Wall Installation
CAUTION: To avoid potential personal injury or property damage:
All 4 lag bolts MUST BE firmly tightened to prevent unwanted movement of the
wall plate assembly. Ensure the wall plate assembly is securely fastened to
the wall before continuing on to the next step.
Hang and Secure TV to Wall Plate
Before hanging TV, please conduct “wall plate installation integrity test” first.
Adjustments
Tilting angle adjustment (0°/-8°)：
Pull TV to your desired angle then fasten 2 tilting bolts with Allen key 02.
Option: To keep TV in vertical position, please use two pins to insert the holes on two brackets respectively (as shown in below image).
Take Down the TV from-the Mount
Product dimensions
