i3 INTERNATIONAL M71 5MP H.265 Edge Ai Dome Camera User Manual

i3 INTERNATIONAL M71 5MP H.265 Edge Ai Dome Camera User Manual

Thank you for purchasing i3 International’s M71 Edge Ai dome camera. M71 is equipped with a motorized 2.8-12mm @ F1.4 lens. This camera is compatible with the optional back box (Part#: B71). M71 camera’s versatile Edge Ai functionality can be utilized by a variety of i3’s solution, including i3’s i3Ai software, SRX-Pro Server and as part of the i3’s Velocity Timer Solution (VTS).
Note: h.265 codec is supported by SRX-Pro v7 and above only. For backwards compatibility, change the codec to h.264 in the camera’s web settings > Config

Image > Video/Audio > Video Compression.

SAFETY

When installing your M71 camera be sure to avoid:

• excessive heat, such as direct sunlight or heating appliances
• contaminants such as dust and smoke
• strong magnetic fields
• areas with mechanical vibrations
• fluorescent lamps or objects that reflect light and unstable light sources
• temperatures below -30° C (-22° F) and above 55° C (131° F).

To avoid electrical shock and to preserve the product warranty, DO NOT disassemble the camera. Refer servicing to qualified personnel only.

CLEANING

• For maximum optical clarity, the camera dome or lens must remain clean. Use a soft, dry cloth to remove finger prints or dust from the dome cover.
• Use a blower to remove dust from the lens.
• Do not use volatile solvents such as alcohol, benzene, or thinners, as they may damage the surface finishes.

PACKAGE CONTENTS

Ensure that the items received match those listed on the order form and the packing slip. In addition to this manual and a fully assembled camera, the dome camera packing box includes:

• A. Standard RJ45 connector (x2)
• B. Surface mount template (x1)
• C. Torx bit (x1)
• D. Plastic anchors (x4)
• E. Round head screws, tapping type (x4)
• F. BNC test monitor input & DC IN power cable (x1)

WATERPROOF RJ45 ASSEMBLY

To prevent the corrosion of the RJ45 connector and to maintain the camera warranty, use the RJ45 waterproof assembly attached to the camera, as shown in the diagram below.

1. Twist off the RJ45 waterproof assembly from the RJ45 connector.
2. Feed the CAT5e/6 cable through the opening in the connector and crimp it using the standard RJ45 connector provided.
3. Plug the crimped CAT5e/6 cable into the RJ45 connector on the camera and twist the waterproof assembly on to re-attach it.

CAMERA PARTS AND DIMENSIONS

1. RJ45 Ethernet PoE Port with waterproof RJ45 connector assembly.
   Insert an Ethernet cable into the port for network connection as well as PoE (Power over Ethernet) power. Use the included waterproof RJ45 connector assembly to maintain the camera warranty and the water-resistant rating.

2. BNC video output connector for public view monitor (PVM) output (CVBS).

3. Screws securing the dome bubble housing to camera module (x4, silver, Torx)

4. IR board

5. Light sensor (do not block or obstruct)

6. Lock screw. Loosen to separate the camera’s mounting base.

7. Reset pinhole. Press for 10 seconds to restore camera settings to factory defaults.

8. CVBS hand-help monitor/DC IN connection port. Use to power the camera and/or fine-tune the camera view during the installation.

9. Zoom Out (Wide), lens adjustment button. Motorized lens can be adjusted remotely through Video Pilot Client (VPC).

10. Zoom In (Tele), lens adjustment button. Motorized lens can be adjusted remotely through Video Pilot Client (VPC).

11. MicroSD Card slot for on-camera video storage (up to 256GB supported, sold separately).

3-AXIS LENS POSITIONING

Important: Do not over-rotate the camera lens assembly beyond the stop point to prevent twisted, disconnected, or broken internal cables/components.

SURFACE INSTALLATION

Start by preparing the mounting surface. Based on installation location and surface type, supplied screws and anchors may not be adequate. Use the (optional) B71 back box for pendant or horizontal wall-mounting and use a 3/4″ NPT pipe or DB60, respectively. Surface installation can be completed without a back box.

Note: After installation, camera must be accessible from the local network (LAN).

To complete a surface mount installation:

1. Attach the supplied mounting template to the mounting surface.
2. Drill 4 holes, as marked on the template, insert supplied anchors into the holes.
3. Use the Torx bit or screwdriver to loosen the set screw on the M71 mounting base and separate the base from the camera.
4. Drill the conduit hole for the camera cable, if routing the cable upwards. If routing the cable sideways, remove the plastic plug on the side of the camera’s mounting base and do not drill the conduit hole.
5. Use the round head machine screws to secure the mounting base to the prepared surface.
6. Feed the camera cable either through the cut conduit hole or through the side cable opening.
7. Re-attach the camera to the mounting base and re-tighten the set screw to secure.
8. Use the security Torx bit or screwdriver (not provided) to loosen four screws securing the dome bubble to M71 camera. Set the dome bubble aside.
9. Adjust the lens assembly for the desired view and re-attach the dome bubble.

Supported mounting options
See the table below for additional mounting options supported by M71 camera. Compatible Mounting Accessories:

B71 – back box for pendant installations DB60 – goose-neck bracket DB60CPM – corner/pole mount kit (use with DB60)

Scan this QR code or visit ftp.i3international.com to view and download AnnexxusConfigurationTool v1.9 (ACT).
Contact our Technical Support team at: 1.877.877.7241 or support@i3international.com if you have any questions or concerns regarding camera installation or if you require software services or support.FTP://ftp.i3international.com

ACTIVATING CAMERA, CHANGING IP ADDRESS in ACT

To activate and secure access to your camera, you must first set the password for the administrative user account (i3admin). IMPORTANT: Your camera will remain inactive and inaccessible until administrative password is set.
Activate your Annexxus M71 camera by setting administrative password:

1. Connect your Annexxus M71 camera to the Gigabit switch.

2. On your i3 NVR, launch i3 Annexxus Configuration Tool (ACT) v.1.9 or higher.
   You can download and install the latest ACT installation package from i3 website: https://i3international.com/download

3. In the model drop-down list, select M71. Security status will say “inactive”.

4. In the Global Camera Settings, click Set Password

5. In the Set password window, enter the new password in the Password and Confirm fields. Follow secure password guidelines. Click OK. The new administrative password will be assigned to the camera and the Security status will change to “active”.
   Change your M71 camera’s default IP Address:
   Note: Your i3 NVR must have a valid IP address (not APIPA)

6. In Annexxus Configuration Tool, select your M71 camera in the list.

7. Uncheck “Default Account” and enter “i3admin” into Username field and the new administrative password (set in Step 6) into Password field.
   Camera’s default IP address: 192.168.0.16. Camera’s default Subnet mask address: 255.255.255.0. Default User name: i3admin

8. Enter the new IP address and Subnet Mask under Device(s) Communication Update and click Update.

9. Wait a few moments for a “Success” message in the Result field.

10. Repeat Steps 7-9 for all detected M71 cameras in the ACT until each camera has a unique IP address.

11. To confirm your camera’s new IP address, click the IE icon next to each camera . In the IE browser, enter administrative Username (i3admin) and (new) Password and click LOGIN. Annexxus camera interface will be displayed in the Internet Explorer window. You should be able to see the camera image on the screen. If you do not see the camera image on the screen, call i3 International technical support team for troubleshooting tips: 1.877.877.7241.

ADD CAMERA TO SRX-Pro PRO SETUP v7

CONFIGURING EDGE Ai in SRX-PRO

SRX-Pro can use M71 camera’s Edge Ai detection capabilities to trigger a variety of alarm actions, such as Email, Audio alarm, or Control activation.

1. In SRX-Pro Setup, go to Cameras tab, and open your M71 camera setup page.
2. Open Ai tab and enable “Edge Ai” option.
3. Camera’s Edge Ai capabilities allow detecting Humans, Automobiles and Other (non-automobile) Vehicles. Select one or more object types and configure the Sensitivity setting for each.
4. Use polygon or directional line tools to draw the detection area on the camera preview window.
5. Name the detection area
6. Configure Alarm conditions: Number of objects and Dwell time (in seconds). Unless the entered alarm conditions are met, no alarm actions will be triggered.
7. Configure one or more alarm actions: Send email, play a Sound file or activate Control output.
8. Configure Alarm schedule (optional). By default, the Alarm schedule is set to 24/7.
9. Click SAVE when done.

CONFIGURING EDGE Ai in i3Ai

By using M71 camera’s Edge Ai detection, i3Ai can deliver Area alarm, Traffic & dwell and Door count analytics data to i3’s CMS without the reliance on the GPU resources. Note: One i3Ai licenses is used for each enabled Edge Ai function (such as Area alarm, Traffic & dwell and Door count. Edge Ai and i3Ai (GPU) features cannot be combined on the same channel.

1. In i3Ai Setup, go to Cameras tab, and open your M71 camera setup page.
2. Click on the Edge Ai tab.
3. Enable “Area alarm”, “Traffic & dwell” and/or “Door count”. Note, each option will use one i3Ai license.
4. Add Area, Line or Door, depending on your chosen function.
5. Use the polygon, rectangle or the directional line to draw the detection area on the camera’s preview window.
6. Name the detection area.
7. Name the Alarm Area, Line or Door tracker.
8. Configure Alarm conditions: Object count and Duration (in seconds). Unless the entered alarm conditions are met, no alarm actions will be triggered.
9. Camera’s Edge Ai capabilities allow detecting Humans, Automobiles and Other (nonauto mobile) Vehicles. Select one or more object types in Object detection drop-down menu.
10. Configure one or more alarm actions: play a Sound file or activate Control output (via UIO8/ UIO8v2).
11. Configure Alarm schedule (optional). By default, the Alarm schedule is set to All days.
12. Click DONE and then SAVE when done.

1.866.840.0004
www.i3international.com

References

• i3 International FTP Login Page
• Ai Smart Video & Cloud Solutions | i3 International
• Download - i3 International

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>