i3 INTERNATIONAL M79 6MP Infrared Outdoor IP 360-degree Fisheye Camera User Manual

i3 INTERNATIONAL M79 6MP Infrared Outdoor IP 360-degree Fisheye Camera

Thank you for purchasing i3 International’s M79 Fisheye IP dome camera.
M79 is equipped with a fisheye 1.07mm @ F2.5 lens and digital WDR, and supports h.265 codec compression.
Note: h.265 codec is supported by SRX-Pro v7 and above only. For backwards compatibility, change the codec to h.264 in the camera’s web settings > Config > Image > Video/Audio > Video Compression.

SAFETY

When installing your M79 camera be sure to avoid:

• excessive heat, such as direct sunlight or heating appliances
• contaminants such as dust and smoke
• strong magnetic fields
• moisture and humidity
• areas with mechanical vibrations
• fluorescent lamps or objects that reflect light and unstable light sources
• temperatures below -30° C (-22° F) and above 50° C (122° F).

To avoid electrical shock and to preserve the product warranty, DO NOT disassemble the camera. Refer servicing to qualified personnel only.

POWER SUPPLY

This camera accepts PoE power.
Ensure the supplied voltage meets the power consumption requirements of this camera (6W) before powering the camera on. Incorrect voltage may cause irreparable damage to the video camera and will effectively void the camera warranty.

CLEANING

• For maximum optical clarity, the camera dome or lens must remain clean.
  Use a soft, dry cloth to remove finger prints or dust from the dome cover.

• Use a blower to remove dust from the lens.

• Do not use volatile solvents such as alcohol, benzene, or thinners, as they may damage the surface finishes.

PACKAGE CONTENTS

Ensure that the items received match those listed on the order form and the packing slip. In addition to this manual and a fully assembled camera, the dome camera packing box includes:

A. Surface Mount template x1
B. Round Head Screw (Tapping Type) x3
C. Plastic Anchor x3
D. Standard RJ45 Connector x2

WATERPROOF RJ45 ASSEMBLY

To prevent the corrosion of the RJ45 connector and to maintain the camera warranty, use the RJ45 waterproof assembly attached to the camera, as shown in the diagram below.

1. Twist off the RJ45 waterproof assembly from the RJ45 connector.
2. Feed the CAT5e/6 cable through the opening in the connector and crimp it using the standard RJ45 connector provided.
3. Plug the crimped CAT5e/6 cable into the RJ45 connector on the camera and twist the waterproof assembly on to re-attach it.

Scan this QR code or visit ftp.i3international.com to view and download AnnexxusConfigurationTool v1.9 (ACT).

Contact our Technical Support team at: 1.877.877.7241 or support@i3international.com if you have any questions or concerns regarding camera installation or if you require software services or support.

|
---|---

CAMERA PARTS AND DEFINITIONS

1. Magnetic tinted plexiglass cover ring. Lift off using the notch.

2. RJ45 Ethernet PoE Port with waterproof RJ45 connector assembly.
   Insert an Ethernet cable into the port for network connection as well as PoE (Power over Ethernet) power. To maintain water-resistant rating in outdoor installations, make sure to use the included waterproof RJ45 Connector assembly.

3. Rubber plug for the side cable opening. Included with B79 back box (optional).
   Install when not routing the cable through the side opening (E.g. Pendant mount installations)

4. MicroSD Card slot for on-camera video storage (up to 128GB supported, sold separately).

5. Reset pinhole. Press for 10 seconds to restore camera settings to factory defaults.

6. Grounding threaded screw hole.

7. Mounting holes (x3)

8. Light sensor (do not block or obstruct) Microphone

9. IR LED lights, 65ft/20m (x6)

SURFACE INSTALLATION

Start by preparing the mounting surface. Based on installation location and surface type, supplied screws and anchors may not be adequate.
For pendant or horizontal wall-mounting, purchase the back box (i3 part numbers: B79) and use a 3/4” NPT pipe or DB60, respectively. Surface installation can be completed without a back box.

Note: After installing the camera, your network camera must be accessible from your local network (LAN).

To complete a surface mount installation:

1. Attach the supplied mounting template to the mounting surface.
2. Drill 3 holes, as marked on the template, insert 3 supplied anchors into the holes
3. Drill the conduit hole for the camera cable, if routing the cable upwards, and cover the cable exit hole with the rubber plug (included w/ the optional B79 back box). If routing the cable sideways, through the cable exit opening, do not drill the conduit hole.
4. Lift the magnetic cover ring off of the camera using the small notch (Fig. 4).
5. Feed the camera cable through the cut conduit hole or through the side cable opening.
6. Use the tapping screws to secure the camera to the prepared mounting surface. (Fig. 5)
7. Re-attach the magnetic cover ring. (Fig. 5)
   

MOUNTING OPTIONS

Compatible Mounting Accessories:
B79 – back box for pendant installations
DB60 – goose-neck bracket
DB60CPM – corner/pole mount kit (use with DB60)

ACTIVATE CAMERA IN ACT

Camera’s default IP address: 192.168.0.16.
Camera’s default Subnet mask address: 255.255.255.0.
Default User name: i3admin

IMPORTANT: Before adding your camera to SRX-Pro, set the administrative password and unique camera IP. Your camera will remain inactive and inaccessible until administrative password is set.

Setting administrative password:

1. Connect your Annexxus M79 camera to the Gigabit switch.

2. Launch i3 Annexxus Configuration Tool (ACT) v.1.9 or higher.
   Download and install the latest ACT installation and GiPi package from i3 website, if needed: https://i3international.com/download

3. In the model drop-down list, select M79.
   
   Security status will say “inactive”.

4. In the Global Camera Settings, click
   Set Password

5. In the Set password window, enter the new password in the Password and Confirm fields. Follow secure password guidelines. Click OK.
   
   The new administrative password will be assigned to the camera and the Security status will change to “active”.

SET CAMERA IP IN ACT

Note: Your i3 Server must have a valid IP address (not APIPA)
Set your camera’s unique IP address:

1. In Annexxus Configuration Tool, select your M79 camera in the list.

2. Uncheck “Default Account” and enter “ i3admin ” into Username field and the new administrative password into the Password field.

3. Enter the new IP address and Subnet Mask and click Update.
   

4. Wait a few moments for a “Success” message in the Result field.

5. Repeat Steps 1-3 for all detected M79 cameras in the ACT until each camera has a unique IP address.

6. To confirm your camera’s new IP address, click the IE icon in ACT.
   In the IE browser, enter administrative Username (i3admin) and (new) Password and click LOGIN. The camera web interface will be displayed in the Internet Explorer window. Download and run the plug-in, if prompted.
   If you are unable to see live video on the screen, call i3 International technical support team for troubleshooting tips: 1.877.877.7241

CHANGE CAMERA MODE

M79 Fisheye camera supports two display modes:

• Mode 1 (default): Fisheye + Panorama + 3x ePTZ
• Mode 2: Fisheye + 4x ePTZ

Switching to Mode 2 (optional):

1. In the camera’s web interface, click on the Config > Fisheye Parameters option.
2. Click on the Stream Mode drop-down and select “Fisheye or 4 PTZ”
3. Click Save , then click OK in the confirmation window. The camera will reboot.
   

CHANGE COMPRESSION

M79 is shipped pre-set to h.265 codec, which requires SRX-Pro v7 and above. If using SRX-Pro v6, you must change the compression to h.264 first.

1. In the camera’s web interface, click on the Config > Video/Audio option.
2. Select “IP Channel 1” in Channel ID drop-down menu.
3. Set compression to H264 in Video drop-down menu for all streams and click Save. Click OK in the confirmation window.
4. Repeat Steps 2-3 for IP Channels 2-5.
   

ADD CAMERA TO SRX-Pro PRO SETUP v7

1. Launch the SRX-Pro Setup from the Desktop or from the SRX-Pro Monitor.
   

2. In the IE browser, click Continue to this website.
   

3. Enter your administrator Username and Password and click LOGIN

4. Click on the Add tile.

5. If using SRX-Pro v.7.1, find your M79 camera in the list of UNASSIGNED CAMERAS. You may need to click REFRESH.
   If using SRX-Pro v.7.2 and above, click SEARCH and wait until your M79 camera is discovered.

6. Select one or more M79 cameras with the same login credentials and click LOGIN

7. Enter camera’s Username and the Password (configured in the previous section) and click SAVE
   Login status for your device must now show the green check mark .
   Note: Devices with “Login failed” status will not be added.

8. Click ADD . Your IP devices have been added to i3 SRX-Pro Setup and are recording based on Sensor + Motion schedule.

Change resolution and frame rate for each camera in the List section of the i3 SRX-Pro Setup.

i3 INTERNATIONAL INC.

Documents / Resources

| i3 INTERNATIONAL M79 6MP Infrared Outdoor IP 360-degree Fisheye Camera [pdf] User Manual
M79, 6MP Infrared Outdoor IP 360-degree Fisheye Camera, M79 6MP Infrared Outdoor IP 360-degree Fisheye Camera, Infrared Outdoor IP 360-degree Fisheye Camera, Outdoor IP 360-degree Fisheye Camera, IP 360-degree Fisheye Camera, Fisheye Camera, Camera
---|---
| i3 INTERNATIONAL M79 6MP Infrared Outdoor IP 360-degree Fisheye Camera [pdf] User Manual
M79, 6MP Infrared Outdoor IP 360-degree Fisheye Camera, IP 360-degree Fisheye Camera, 6MP Infrared Outdoor Fisheye Camera, Fisheye Camera, Camera

References

• i3 International FTP Login Page
• Ai Smart Video & Cloud Solutions | i3 International
• Download - i3 International

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>