MONSTER PUSAT Wave ANC Bluetooth Headset User Manual
- June 5, 2024
- Monster
Table of Contents
MONSTER PUSAT Wave ANC Bluetooth Headset
Product Parameters
- Bluetooth version: V5.1
- Support protocol: A20P V1.3.1 AVRCP V1.6 HFPV1.7.1 HSP V1.2
- ANC frequency range: 20-500HZ
- ANC noise reduction value: -22t3db
- Support Audio Codes: aptX, aptX-HD, aptX-l|, SBC, and AAC
- Bluetooth transmission distance: 1Om
- Impedance: 320+15%
- Speaker sensitivity in Bluetooth state: 101t3db
- Speaker frequency range: 20Hz-20000Hz
- Bluetooth frequency range: 2.402GHz-2.480GHz
- Charging port: TYPE-C
- Battery specification: 3.7V 800mAh
- Charging time: 3 hours
- Charging voltage: 5V
- Bluetooth life time (maximum volume): 60 hours
- Standby time(connected): 60 hours
- Noise cancelling battery life: 66 hours
- Bluetooth+noise cancelling battery life: 35 hours
- Ear cover material practice: PU imitation protein
- Product size: 2015.575 cm
- Net weight of the headset: 210g
Items Included
- 1x Bluetooth headset
- 1x TYPE-C charging cable
- 1xAux-in cable
- 1x User’s Manual
- 1x Carrying Case
- 1x Flight Adapter
Button Description
- ANC: ANC Switch
-
I On/off Switch, Play/Pause Music, Answer or Reject Calls, Voice assistant.
- Long press for Next song/short press reduce volume.
- Long press for Previous song /short press increase volume.
Bluetooth Function Description
-
Pairing Operation:
- Initial pairing: Turn on the Bluetooth headset. After you have heard the “Power on, Pairing” voice, the device will automatically switch to Bluetooth Mode, the LED indicator quickly flashes in alternating blue and red colors. ‘Turn on Bluetooth ‘search function of your smart device and select the device, “Pusat Wave ANC” from the list; no password is required. After successful pairing. you will hear the voice that states the device is connected and the LED indicator permanently lights in blue color. “
- Subsequent pairing: Turn off the Bluetooth function of the smart device that you have previously connected and you will hear the voice fhat your device was disconnected; in case the headset does not search for and connect to the last Connected smart device within 3 seconds, then it will automatically switch to pairing mode. The LED indicator quickly flashes in alternating blue and red colors.’ Turn on Bluetooth search function of another smart device and select the device,’ “Pusat Wave ANC” from the list; no password is required. ‘After successful pairing, you will hear the voice that states the device is connected ‘and the LED indicator permanently lights in blue color.
- ‘Re-pairing after power oft: When the headset is turned off and turned on again, ”it will automatically pair with the last connected smart device within 3 seconds.
-
Answer Calls :
Short pressIlwhen calls’ coming. -
Hang up phone calls:
Short pressIafter calling. -
Reject Calls:
Long press -
Voice assistant:
Double-clickI -
Music Play:
Short pressI|after connected with the smart device.
ANC Mode
Long press the ANC key, when the LED light turn on and stay green, the ANC
mode is on. ANC switch is independent switch. It needs to be turned on or off
independently.
‘Line-in Mode
When the headset is on, insert the Line-in cable, the Headset will shut down
‘automatically. Then the headset can only be used in wired mode.
LED Indicator Light Status
- Charge Status
- Red LED always on. When fully charged, LED indicator light turns off.
- ‘Power on Status
- Blue LED indicator light turns on.
- Power off Statuss
- LED indicator light turns off
- Pairing Status
- Blue and Red LED indicator lights rapidly alternating flash.
- Standby Status
- Blue LED indicator light turns on.
- Connected Status
- Blue LED indicator light turns on.
- Using Status
- Bluetooth Mode, Blue LED indicator light flashes slowly ‘AUX-in Mode, the headset automatically turns off, LED light goes out.
Note
If no pairing connection after the Bluetooth headset enters the pairing mode, please turn off the headset as for power saving.’ Do not perform other operations when searching Bluetooth to prevent the program error. Please select the appropriate volume in use to prevent damage to your ears. Please note that a good environment while using the Bluetooth headset can avoid damage to the headphone. Please charge the headset after a long time of none- use. Qualcomm aptX isa product of Qualcomm Technologies, Inc. and/or its subsidiaries. Qualcomm is a trademark of Qualcomm Incorporated, registered in the United States and other countries. aptX is a trademark of Qualcomm Technologies International, Ltd., registered in the United States and other countries.