anko 10m Smart Wi-Fi LED Strip Light Remote Control User Manual
- June 9, 2024
- Anko
Table of Contents
10m Smart Wi-Fi LED Strip Light Remote Control
User Manual
10m Smart Wi-Fi LED Strip Light Remote Control
43033010
GOOGLE IS A TRADEMARK OF GOOGLE LLC.
AMAZON, ALEXA AND ALL RELATED LOGOS ARE TRADEMARKS OF AMAZON.COM, INC. OR ITS
AFFILIATES
Please take a minute to read the below information on setting up this device.
The smart strip light can work with both Amazon Alexa and Google Assistant.
After the smart strip light has been installed it will need to be paired with
an APP “Tuya Smart” downloadable from Google Play or the Apple store.
Once the Tuya Smart APP is installed it will then need to be linked with
either Amazon Alexa or Google Assistant account to activate the voice control
function. This user manual consists of three parts. Part one is fundamental
set-up, part two and three are alternative device set ups.
If you use Amazon Alexa for voice control, please follow instructions on part
one and two. If you use Google Assistant for voice control, please skip part
two, follow the instructions on part one and three.
Part One: Pairing the smart strip light to “Tuya Smart” App
Part Two: Controlling the smart strip light with Amazon Alexa
Part Three: Controlling smart strip light with Google Assistant
Specification
Input: 220V-240V,50/6011Z (AC adapter XY36LE-120300VH-AW)
Output: d.c.12V 3A
Dimension: 5M x 2pcs
INSTALLATION
- Unroll the strip light before use.
- Connect to the APP properly before installation.
- For standalone use only. Do not connect with others strip lights.
- Luminaires not suitable for covering with thermally insulating material.
- Do not block the controller with metal objects.
- There’s a built-in microphone inside the controller, please place your music playing device near the controller for better results.
- The light source of this luminaire is not replaceable;when the light source reaches its end of life the whole luminaire shall be replaced.
- When breakage or damage to lamps occurs, the chain must not be used/energized but disposed of safely.
- For indoor use only.
- Before adhering strip lights, clean the surface of the area you will be placing the lights on. It is recommended to apply your strip lights on smooth stable surfaces.
It should not be placed on rough, textured or painted wall surfaces or any surfaces that can bend or move.
Product Instructions
1. Cleaning the installation surface.| 2. Sticking to the installation
surface.
3. Plugging into the socket.| 4. One press the button to power ON/OFF the
lights with the lights powered on. Press and hold the button for about 6
seconds to enter the configuration mode.
Part One
How to pair the smart strip light to Tuya Smart App?
Install the Tuya Smart to control the smart strip light.
Please download and install the app by:
-
Scanning below QR code OR Search “Tuya Smart” in App Store or Google Play. Create an account on Tuya Smart and login.https://smartapp.tuya.com/tuyasmart
Note: You will need to enter these account details for Alexa or Google Assistant App pairing later.
-
Add the smart strip light to Tuya Smart App
-
The smart Wi-Fi devices only supports 2.4 GHz Only . Make sure your mobile device connected to your home 2.4 Ghz WiFi network. Please refer to your WiFi router setup guide.
-
Tap “+” button on top right corner to add device,then tap “strip lights (BULE+Wi-Fi) ” to enter.
-
Enter your Wi-Fi SSID name and Wi-Fi password in then tap “Next”.
-
Enable your mobile device Bluetooth connection for easy setup mode.
-
Press and hold the middle button of the controller for 6 seconds, the strip light will fast flash in red color this will then enter Quick Connection Mode. Please make sure the smart strip light is standby. (The strip light in red color and flash is 2 times per seconds) .
Manual Control by 3 Buttons
-
Tap “next” button and wait till it is successfully connected. Give a name to the device.
• A simple name is recommended for easier voice recognition with Alexa or Google Assistant.
• The name given to the device will be the same for voice control on Alexa or Google Assistant. For example, the device is named “Smart LED Strip Light 10M ” on this user manual.
• The named device will be shown on the app homepage. Now you can control the smart strip light with Tuya smart on the setting page.
How to Control the smart strip light by Tuya Smart App
Part Two- How to control the smart strip light with Amazon Alexa.
Please make sure that your Alexa app is connected to Echo, and both work well
under your WIFI network.
Step A: Log in your Alexa App, tap top left corner, and tap “Skills and
Games”
Step B: Type “Tuya Smart”, find “Tuya Smart” from the search result, and tap it to Enable the skill.
Step C: Enter your Tuya
Smart App account and password. Tap ” Link Now “, then Tuya Smart will linked
successfully.
Step D: When the named smart strip light is pared to Alexa from Tuya
Smart, it will show on the device page (see the “Smart LED Strip Light 0,1 ”
example)
Step E: Now you can control the smart strip light with Alexa App on the
setting page.
Step F: You can also voice control the smart strip light with Alexa by
giving voice commands: “Alexa, turn on “device name”, “Alexa, set `device
name’ to ‘number’. Device name is the one you give to the smart strip light.
The device is named “Smart LED Strip Light loM ” in this user guide. For
example, “Alexa, turn on ‘Smart LED Strip Light ioM ”
Part Three-How to control the smart strip light with Google Assistant.
Step A: Login Google Assistant App, tap “Home Control” on the right side
bar page.
Step B: Tap “+”button on the bottom right to enter next page.
Step C: Find “Tuya Smart” from side bar list.
Step D: Enter your “Tuya Smart” App account and password to bind Tuya Smart account to Google Assistant.
Step E: You can assign the devices of different room. You could voice control it by giving voice commands: “Hey Google, turn on ‘device name’, “Hey Google, set ‘device name’ to ‘number’. Device name is the one you give to the smart strip light. The smart strip light is named “Smart LED Strip Light toM ” in this user guide. For example, “Hey Google, turn on “Smart LED Strip Light 10M “.
Remote control function
The dynamic mode is correspond with the scene light in APP, total seven kinds of light modes
Pls note: speed +, speed-, will be used when the light is on the dynamic
mode and the light is in color change function.
THIS PRODUCT CONTAINS BUTTON CELL BATTERIES SCAN THE QR CODE FOR MORE
INFORMATION
http://productsafety.gov.au/products
/electronics-technology/button-
batteries
WARNING: Button cell Batteries are Hazardous (new or used). Keep away
from Children. Button Cell Batteries can cause severe or fatal injuries in 2
hours or less if they are swallowed or placed inside any part of the body. If
you suspect your child has swallowed or inserted a button cell battery, call
the 24-hour poisons information centre in Australia on 131126 or in New
Zealand 0800 764 766 or contact your country emergency dept. Used batteries
must be disposed of in the garbage or a battery recycle facility.
CAUTION: Do not ingest battery—Chemical burn hazard.
The remote control supplied with this product contains a coin/button cell
battery. If the coin/button cell battery is swallowed, it can cause severe
internal bums in just 2 hours and can lead to death.
Keep new and used batteries away from children.
If the battery compartment does not close securely, stop using the product and
keep it away from children.
If you think batteries might have been swallowed or placed inside any part of
the body, seek immediate medical attention.
12 Month Warranty
Thank you for your purchase from Kmart.
Kmart Australia Ltd warrants your new product to be free from defects in
materials and workmanship for the period stated above, from the date of
purchase, provided that the product is used in accordance with accompanying
recommendations or instructions where provided. This warranty is in addition
to your rights under the Australian Consumer Law.
Kmart will provide you with your choice of a refund, repair or exchange (where
possible) for this product if it becomes defective within the warranty period.
Kmart will bear the reasonable expense of claiming the warranty. This warranty
will no longer apply where the defect is a result of alteration, accident,
misuse, abuse or neglect.
Please retain your receipt as proof of purchase and contact our Customer
Service Centre on 1800 124 125 (Australia) or 0800 945 995 (New Zealand) or
alternatively, via Customer Help at Kmart.com.au for
any difficulties with your product. Warranty claims and claims for expense
incurred in returning this product can be addressed to our Customer Service
Centre at 690 Springvale Rd, Mulgrave Vic 3170.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
For New Zealand customers, this warranty is in addition to statutory rights
observed under New Zealand legislation.