twelvesouth AirFly Pro Transmitter for Wireless Headphones User Guide

twelvesouth AirFly Pro Transmitter for Wireless Headphones

Specifications

• Product: AirFly Pro
• Modes: Transmit Mode (TX), Receive Mode (RX)
• Connectivity: Bluetooth
• Compatibility: Works with AirPods, wireless headphones, smartphones, tablets, and devices with standard headphone jacks
• Charging: Wireless charging or standard charging case

Product Usage Instructions

Selecting AirFly Pro Mode
To begin, select either Transmit or Receive Mode based on your audio source and destination.

Transmit Mode (TX)
Transmit Mode is used to send audio from a wired headphone jack to your AirPods or wireless headphones. Plug AirFly Pro into the headphone jack of the source device.

Receive Mode (RX)
Receive Mode is used to wirelessly connect your phone to an AUX-IN port. Pair your phone with AirFly Pro and connect AirFly Pro to the AUX-IN port of a stereo device.

Pairing AirFly Pro with AirPods (Transmit Mode)

1. Place AirPods inside the charging case and open the lid.
2. Press and hold the button on the back of the Charging Case until the light flashes white.
3. Turn off Bluetooth on connected devices.
4. Press and hold the Power Button on AirFly Pro to enter pairing mode.
5. Once connected, the light on the charging case will turn green.
6. Plug AirFly Pro into the headphone jack of the source device.

Pairing AirFly Pro with Wireless Headphones (Transmit Mode)

1. Put your headphones into Bluetooth Pairing Mode.
2. Turn off Bluetooth on connected devices.
3. Press and hold the Power Button on AirFly Pro to enter pairing mode.
4. Once connected, plug AirFly Pro into the headphone jack of the source device.

Using AirFly Pro with an AUX-IN Port (Receive Mode)
To use Receive Mode, pair your phone with AirFly Pro and connect AirFly Pro to the AUX-IN port of a stereo device for wireless audio transmission.

Tips & Tricks

• If AirFly Pro does not enter pairing mode, press the Reset Button to reset to factory settings.
• AirFly Pro will remember your paired devices for easy re-connection in the future.

Charging
Charge AirFly Pro using a wireless charging case or a standard charging case for uninterrupted use.

Turning AirFly Pro On & Off
To turn on/off AirFly Pro, press and hold the Power Button for a few seconds until the status light indicates the device state.

Status Light Guide:
Refer to the status light guide to understand different indications such as pairing mode, connected status, and power state.

Frequently Asked Questions (FAQ):

Q: How do I reset AirFly Pro to factory settings?
A: If AirFly Pro does not enter pairing mode, press the Reset Button on the right side to reset it to factory settings.

To Begin, Select Transmit or Receive Mode

Transmit Mode : to connect AirPods or wireless headphones to any headphone jack

Transmit Mode (TX) is used to send audio from a wired headphone jack, such as an airplane TV or treadmill at the gym, to your AirPods or wireless headphones.

Receive Mode: to wirelessly connect phone to AUX-IN
Receive Mode (RX) is used to receive Bluetooth audio from a device (such as a smartphone or tablet) and send it to the AUX-IN port of a connected stereo (such as in a car, boat, etc).

Pairing AirFly Pro with AirPods

(Transmit Mode)

1. To enter Pairing Mode on AirPods, ÿrst place AirPods inside charging case. With the lid open, press and hold the button on the back of the Charging Case until the light flashes white.

2. Turn o° Bluetooth on the devices that were connected to your AirPods.
   To enter pairing mode, press and hold the Power Button for ° seconds to turn on AirFly Pro. AirFly flashes amber and white to indicate that it is in pairing mode. * If AirFly Pro does not flash amber and white, press the Reset Button on the right side to reset to factory settings.

3. Once successfully connected, the light on your charging case will turn green, and AirFly Pro will illuminate in white and remain on for ˙˜ seconds. This can take up to ˇ˘ seconds for initial pairing, but AirFly Pro will remember your AirPods when re-connecting in the future.

4. Plug AirFly Pro into any device with a standard headphone jack to listen to audio wirelessly.

Pairing AirFly Pro with Wireless Headphones

(Transmit Mode)

1. Put your headphones into Bluetooth Pairing Mode (refer to your headphone’s owner’s manual for more details).

2. Turn o° Bluetooth on the devices that were connected to your headphones.
   To enter pairing mode, press and hold the Power Button for ° seconds to turn on AirFly Pro. AirFly flashes amber and white to indicate that it is in pairing mode. * If AirFly Pro does not flash amber and white, press the Reset button on the right side to reset to factory settings.

3. Once successfully connected, AirFly Pro will illuminate in white and remain on for ˙˜ seconds. This can take up to 90 seconds for initial pairing, but AirFly Pro will remember your headphones when re-connecting in the future.

4. Plug AirFly Pro into any device with a standard headphone jack to listen to audio wirelessly.

Pairing with a Second Set of Wireless Headphones
With one set of headphones paired and active, you can then pair a second set of headphones to AirFly Pro. Double press the Power Button to enter Pairing Mode (Note: AirFly must already be on to pair.)

Once successfully connected,* AirFly Pro will illuminate in white and remain on for 10  seconds.

Reconnecting AirPods / Headphones to iPhone
Once paired, AirFly Pro will remember your AirPods / Headphones and switch to them when the unit is turned on. To switch back to using your AirPods / Headphones with your iPhone, first turn oFF AirFly Pro.
On your iPhone, open Bluetooth Settings, and select your headphones from the list. Status will change from Not Connected to Connected once headphones are successfully paired with your iPhone.

Using AirFly Pro with an AUX-IN Port
(Receive Mode)
Toggle AirFly Pro to Receive Mode (RX). Press and hold the Power Button to turn on AirFly (if it is not already powered on), and AirFly will begin to blink amber and white once in Pairing Mode.

• With AirFly Pro in Pairing Mode, open up the Bluetooth settings on your smartphone.
• Select AirFly Pro from “other devices”  to complete pairing. 
• Once your phone is connected, plug AirFly Pro into the AUX-IN port of the desired source. 

Tips & Tricks

1. If only one AirPod seems to be playing audio, turn AirFly Pro and and back on. This will re-sync AirFly Pro and should reconnect both AirPods.
2. If you’re having trouble pairing your headphones, make sure that AirFly Pro is switched to Transmit (TX) mode.
3. If you want to pair a new set of headphones to AirFly Pro, or clear the pairing list to factory settings, reset AirFly by pressing and holding the Reset button on the side of AirFly for ° seconds. Once reset, AirFly will blink amber 4  times, and then will go into Pairing Mode.

Charging AirFly Pro

• To recharge, simply plug the included USB-C to USB-A charging cable into AirFly Pro, and then into any powered USB port. AirFly Pro is fully charged within 2  hours.
• The internal battery of AirFly Pro lasts over 25  hours. We recommend fully charging AirFly Pro before using it for the first time. If your AirFly Pro is low on power, it will flash amber 3  times to alert you that it will need to be charged soon.
• While charging, the AirFly Pro will illuminate in amber and stay on. Once fully charged, the amber light will turn off.

Turning AirFly Pro On & Off

• To turn on AirFly Pro, hold down the Power Button for up to 5  seconds until AirFly Pro lights up.
• To turn off AirFly Pro, hold down the Power Button for 5 seconds.
• AirFly Pro will blink amber twice and then power off.

Status Light Guide

• Power On White LED flashes twice
• Pairing Mode White & Amber LED flashes alternately
• Unconnected Standby Mode White LED flashes twice every 5  seconds
• Connected Standby Mode Solid White LED
• Low Power Amber LED flashes 3  times
• Charging Solid Amber
• Fully Charged Amber LED turns off

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISED Statement
This device complies contains license-exempt transmitter that comply with Innovation Science and Economic Development Canada’s license-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference; and
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Safety Statement

• Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion;
• Leaving a battery in an extremely high temperature surrounding environment that can result in an explosion or the leakage of flammable liquid or gas;
• A battery subjected to extremely low air pressure that may result in an explosion or the leakage

NBTC Statement
This telecommunication equipment conforms to the requirements of the National Telecommunications Commission.

RED
Hereby, Twelve South, LLC, declare that the radio equipment type, Model name AirFly Pro, is in compliance with Directive 2014/53/EU. The full test of EU declaration of conformity is available at our website: http://www.twelvesouth.com

RF Exposure Statement
Caution: To maintain the compliance with RF exposure guidelines, place the unit at least 20cm from nearby person.

Have questions?

Visit twelvesouth.com or contact support@twelvesouth.com © 2024 Twelve South, LLC. All rights reserved. 1503 King St. Charleston, SC 29405 – USA

twelvesouth.com/recycle
Points de collecte sur www.quefairedemesdechets.fr

References

• Twelve South - Apple Accessories designed to enhance and inspire
• Recycle
• Twelve South - Apple Accessories designed to enhance and inspire

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>