Bailey 145685 Electronic Transformer Light Control Installation Guide
- June 10, 2024
- Bailey
Table of Contents
Bailey 145685 Electronic Transformer Light Control
Before installation please read the specifications to make sure that this product is suitable for the operating environment.
- This dimmable electronic transformer is compatible with 12V halogen and LED lamps!
- Dimmable with most leading/trailing edge dimmers.
- Transformer must be installed above insulation.
Installation
- Primary voltage range
- Frequency
- Input current
- Secondary voltage
- Output current (full load)
- Power range
- Output frequency
- Efficiency
- Power factor
- Input capacitance
- Ambient temperature (ta)
- Max. case temperature (tc)
- Dimming
- Dimensions L x W x H
- Weight
- Primary terminal
- Input wire cross section
- Secondary termina
- Output wire cross section
- Secondary cable length (min-max)
- Housing materia
- Safety class
- Overload protection
- Short ciruit protection
Wiring scheme
Warning – Caution
- Risk of electric shock. Disconnect power before installation, servicing and removal.
- All safety instruction must be followed to avoid a risk of injury or property damage.
- Wet applications require an IP rated fixture.
- Installation should be done by a qualified professional.
- Install transformer in places with good air flow and away from heat sources.
- Dimmer should be installed on power input wire leading to transformer.
- If flickering or noise occurs it means the transformer is not compatible with used LED lamp and/or LED dimmer.
Customer Support
Bailey Electric & Electronics bv
Everdenberg 21 4902TT Oosterhout The Netherlands
+31 (0)162 52 2446 | www.bailey.nl
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>