tracer Splash S Wireless Speaker Instruction Manual

June 10, 2024
Tracer

tracer logo Splash S BT TWS
Splash S Wireless Speaker
Instruction Manual

Splash S Wireless Speaker

tracer Splash S Wireless Speaker

Introduction

Thank you for using our company’s products, in order to enable you to operate the speaker as easy as possible. Please read this manual carefully before you begin to use it. The Speaker is a fashion portable wireless bluetooth speaker with water proodesign, Support bluetooth 5.1 protocol, support for smartphones, tablets, notebooks that with bluetooth audio equipment, allowing you to completely getrid of a wire harness restraint, freely enjoy music, and without biuetooth moble phones, notebook computers, P3, MP4 and other audio input equipment.

Points for attention

  • Do not hit or crush it seriously.
  • Do not contact benzene, diluent and other chemicals.
  • Do not use near by strong magnetic field or electic field.
  • Avoid direct rays or heating appliances.
  • Do not disassemble, repair or modify.
  • Do not listen at large volume for long periods of time, so as not to injure the hearing
  • Do not clean the speaker with water and don’t immerse the speaker in the water.
  • When using at low voltage, it may cause distortion of sound and please charge itin time.
  • Bluetooth is compatible with common smart phones and tablets, but depending on the device or application you use, may not be able to support a particular feature.

Buttons information with Interface:

  1. Long press Power Offfon, short press switch modes to Bluetooth, TF card, Aux, FM radio

  2. Next song /volume down, Short press to next song, long press to down volume

  3. Pause / Play / Hands free/TWS function KEY.
    1. Short press to pause/ tell, pause/ play
    2. When incoming call, short press answer/hang up long press reject
    3. Double-click the key connect to TWS

  4. Previous song/ volume up, Short press to previous song, long press to up volume:

  5. Auxin

  6. Microphone

  7. TF card port

  8. DC 5V Type-C Charge port

  9. Charging LED

Bluetooth mode

  1. Bluetooth version: Bluetooth 5.1, supports HSPHFRAZDP protocol, with English prompt voice, and biuetooth device name Splash S
  2. Press switch button (2 seconds).on or off. After opening, speaker makes a prompt voice, the blue light flashes quickly, and the speaker goes into bluetooth mode:
  3. The blue light flashes by quick into the matching state and the phone searches for the name of the Spiash S device to connect. If you need the password, enter it (0000), when the connection is successful the blue light is always bright and speaker indicate a successful sound. The blue light flashes slowly during the music playing. Once the paired phone turns on bluetooth and then automatically reconnects the speakers.

AUX in mode

  1. Insert AUX in automatically into AUX in mode and the blue light flashing by siowly.

TF card

  1. Once speaker has inserted the TF card with automatically switched to music mode and the blue light flashing by slowly.

Charging

  1. Plug the USB cable into the speaker connect to the 5V charger or computer to charge the speaker( by Type-C)
  2. When charging, the “charging” red light flashes on quickly when it is full the light is off.

How to set-up TWS functior:
Power on two same speakers at the same time. And make sure the two same speakers are in bluetooth mode.
Connect the speaker with your audio device. Press and hold Play/Pause button on both speakers simultaneously to enable the TWS function. You will hear indication sound “Dong’. It means TWS function was successfully enabled. To cancel or enable TWS function again, simply press and hold Play/Pause button.
FM Radio mode:

  1. Inadio mode, first plug in the charging line (antenna), short press to “on/off” button, can switch to FM Modes.
  2. Short press “Play/Pause” bottom automatic station search and stored automatically.
  3. Short press the Volume up or Volume down, long press to next track and long press to previous track.

Note:
Please make sure that the speaker Bluetooth is not connected to anything while playing music via the audio cable
Others

  1. The default volume of the speaker is 2/3 of the total volume. To protect battery life and speakers work, so the software Settings when the battery voltage is lower than 3.3 V speakers will automatically detect the concurrent give out sound prompt alarm, when battery voltage is lower than 3.3 V/ the speaker makes a voice prompt and set up automatic shutdown meantime.
  2. When the speaker stand stil, the speaker will power off automatically if not use the speaker 10 minutes. If need play again needs to power on the speaker again.

Package Includes

  1. Speaker x 1 pcs
  2. Type-C USB Charging Cable x1 pcs
  3. User Manual x 1 pes

List of key functions

Buttons

| | |
1. Long press Power Off/on
2. Short press switch modes to  Bluetooth,TF/Aux and FM radio (when switching mode, needs to be inserted  into the audio line otherwise it will not be valid).| 1. Short press to pause/ play
2. Double click last No to redial, short press pause/ play; When incoming call, short press answer/hang up
3. Double-click the key connect to TWS| Short press to previous song, long press to down volume| Short press to next song, long
press to up volume
Short press to switch mode| Short press to pause/ play| Long press to down volume| Long press to up volume

Specification parameters:

  1. Bluetooth Version: V5.1
  2. Bluetooth Range: 10 meters
  3. Output power: RMS 5W*1PCS
  4. Driver Size: 45 mm
  5. Frequency response:100 Hz-20 KHZ
  6. Builtin battery: 600mA/3.7V
  7. Sensitivity:84+2 dB
  8. Signal to noise ratio: 265 dB
  9. Distortion: 1%
  10. Charge time: 1.5-2 H
  11. Playing time: up to 5 Hours (Medium volume Level)
  12. Product size: 68’68*800mm
  13. Function: BLUETOOTH /TF Card /AUX /Hands-free call and TWS
  14. Charge port: Type-C
  15. Maximum Transmitter Power (E.| R P)<20d8m
  16. The range on which the device operates: 2400 MHz – 2483.5 MHz

**** The symbol of a crossed-out wheeled bin placed on electronic or electrical equipment, its packaging or accompanying documents means that the product may not be thrown out together with other waste. Used equipment may contain substances with toxic and carcinogenic properties, hazardous to human health and life, and poisoning the soil and groundwater. It is the user’s responsibility to hand over the used equipment to a designated collection point for its proper processing. For more information on recycling of electronic and electrical equipment, please contact your local authorities, waste di-sposal services and the place where you purchased this product. The household plays an important role in contributing to the reuse and recovery of secondary raw materials, including recycling, waste equipment. At this stage, attitudes are formed that affect the preservation of the common good, which is a clean natural environment.

tracer logo Producent:
Megabajt Sp. z 0.0., ul. Rydygiera 8, 01-793 Warszawa

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals