addon Q56-2Q56-200GB-AOC15MLZ-AO Active Optical Cable Instructions

addon Q56-2Q56-200GB-AOC15MLZ-AO Active Optical Cable

Features

• Low latency DSP-free electronics-based CDR
• Multi-data rate up to 56.15 Gb/s per lane
• PAM4 modulation
• Single 3.3 V power supply
• Low power consumption: 3.6W on 200G end with all CDRs enabled
• Up to 15m length
• SFF-8665 compliant
• SFF-8636 compliant I2C management interface
• Operating case temperature: 0◦C to 70◦C
• Hot pluggable
• RoHS/REACH compliant
• TUV-certified
• LSZH, Aqua cable

Application

• IEEE 802.3cd 200GBASE SR4
• Datacenter: servers, switches, storages and NIC adapters
• Proprietary HPC interconnections

Product Description

This is an MSA compliant 200GBase-AOC QSFP56 to 2xQSFP56 active optical cable that operates over multi-mode fiber with a maximum reach of 15.0m (49.2ft). At a wavelength of 850nm, it has been programmed, uniquely serialized, and data- traffic and application tested to ensure it is 100% compliant and functional. This active optical cable is TAA (Trade Agreements Act) compliant, and is built to comply with MSA (Multi-Source Agreement) standards. We stand behind the quality of our products and proudly offer a limited lifetime warranty. AddOn’s active optical cables are RoHS compliant and lead-free.
TAA refers to the Trade Agreements Act (19 U.S.C. & 2501-2581), which is intended to foster fair and open international trade. TAA requires that the U.S. Government may acquire only “U.S. – made or designated country end products.”

Absolute Maximum Ratings

Parameter                                                 Symbol Min                          Typ.                         Max. Unit

Supply Voltage| Vin| 0| | 4.0| V
Input Swing| Vin-max| | | 1500| mVpp
Storage Temperature (Ambient)| Tstc| -40| | 85| °C
Relative Humidity| RH| 5| | 85| %

Recommended Operating Specifications

Parameter                                                           Symbol Min                   Typ.                  Max.                 Unit| Notes
---|---
Operating Case Temperature| Top| 0| | 70| °C|
Power Supply Voltage| Vcc| 3.15| 3.30| 3.47| V|
Power Supply Current| 200G End| ICC| | 1100| 1250| mA| 1
100G End| ICC| | 750| | mA| 1
Power Consumption| 200G End| P| | 3.6| 4.0| W| 1
100G End| P| | 2.3| 2.5| W| 1

N otes:

1. Per end, all channel CDRs are enabled.

Electrical Characteristics

Parameter                                                        Symbol Min                    Typ                   Max                   Unit Notes

Data Rate (Per Channel)| BR| | 26.5625| | GBd| 1
Transmitter| | | |
Input Differential Impedance| RIN| | 100| | Ω|
Differential Data Input Swing| VINP-P| 300| | 900| mV|
Receiver| | | |
Output Differential Impedance| ROUT| | 100| | Ω|
Differential Data Output Swing| VOUTP-P| 300| 700| 900| mV|
B it Error Ratio (at 26.5625 GBd)| | | | 2.4×10-4| | 2

N otes:

1. Dual data rate of 25.78125 and 28.07618 Gbaud are available upon request.
2. Pre-FEC Bit Error Ratio with a PRBS 231 – 1 test pattern over a normal operating temperature range.

Active Optical Cable Specifications

Parameter                                        Value Unit                                 Note

Cable Diameter| LSZH: Ø3.0 ± 0.15| mm|
Minimum Bend Radius| 30| mm| Without tension
Length Tolerance| +300 / –0| mm|
Cable Jacket| LSZH, Aqua

Electrical Pin-Out Details

Pin Descriptions

Pin               Logic                   Symbol                Description Notes

1| | GND| Ground| 1
2| CML-I| Tx2n| Transmitter Inverted Data Input|
3| CML-I| Tx2p| Transmitter Non-Inverted Data Input|
4| | GND| Ground| 1
5| CML-I| Tx4n| Transmitter Inverted Data Input|
6| CML-I| Tx4p| Transmitter Non-Inverted Data Input|
7| | GND| Ground| 1
8| LVTTL-I| ModSelL| Module Select|
9| LVTTL-I| ResetL| Module Reset|
10| | Vcc Rx| +3.3V Power supply receiver| 2
11| LVCMOS-I/O| SCL| 2-wire serial interface clock|
12| LVCMOS-I/O| SDA| 2-wire serial interface data|
13| | GND| Ground| 1
14| CML-O| Rx3p| Receiver Non-Inverted Data Output|
15| CML-O| Rx3n| Receiver Inverted Data Output|
16| | GND| Ground| 1
17| CML-O| Rx1p| Receiver Non-Inverted Data Output|
18| CML-O| Rx1n| Receiver Inverted Data Output|
19| | GND| Ground| 1
20| | GND| Ground| 1
21| CML-O| Rx2n| Receiver Inverted Data Output|
22| CML-O| Rx2p| Receiver Non-Inverted Data Output|
23| | GND| Ground| 1
24| CML-O| Rx4n| Receiver Inverted Data Output|
25| CML-O| Rx4p| Receiver Non-Inverted Data Output|
26| | GND| Ground| 1
27| LVTTL-O| ModPrsL| Module Present|
28| LVTTL-O| IntL| Interrupt|
29| | Vcc Tx| +3.3V Power supply transmitter| 2
30| | Vcc 1| +3.3V Power Supply| 2
31| LVTTL-I| LPMode| Low Power Mode|
32| | GND| Ground| 1
33| CML-I| Tx3p| Transmitter Non-Inverted Data Input|
34| CML-I| Tx3n| Transmitter Inverted Data Input|
35| | GND| Ground| 1
---|---|---|---|---
36| CML-I| Tx1p| Transmitter Non-Inverted Data Input|
37| CML-I| Tx1n| Transmitter Inverted Data Input|
38| | GND| Ground| 1

Note :

1. GND is the symbol for signal and supply (power) common for the QSFP module. All are common within the QSFP module and all module voltages are referenced to this potential unless otherwise noted.Connect these directly to the host board signal-common ground plane.
2. Vcc Rx, Vcc1 and Vcc Tx are the receiver and transmitter power supplies and shall be applied concurrently. Vcc Rx, Vcc1 and Vcc Tx may be internally connected within the QSFP transceiver module in any combination. The connector pins are each rated for a maximum current of 500 mA.

Block Diagram

Mechanical Specification

About Addon Networks
In 1999, AddOn Networks entered the market with a single product. Our founders fulfilled a severe shortage for compatible, cost-effective optical transceivers that compete at the same performance levels as leading OEM manufacturers. Adhering to the idea of redefining service and product quality not previously had in the fiber optic networking industry, AddOn invested resources in solution design, production, fulfillment, and global support.

Combining one of the most extensive and stringent testing processes in the industry, an exceptional free tech support center, and a consistent roll-out of innovative technologies, AddOn has continually set industry standards of quality and reliability throughout its history.

Reliability is the cornerstone of any optical fiber network and is in engrained in Addon’s DNA. It has played a key role in nurturing the long-term relationships developed over the years with customers. AddOn remains committed to exceeding industry standards with certifications from ranging from NEBS Level 3 to ISO 9001:2005 with every new development while maintaining the signature reliability of its products.

U.S. Headquarters
Email : sales@addonnetworks.com
Telephone: +1 877.292.1701
Fax: 949.266.9273

Europe Headquarters
Email : salessupportemea@addonnetworks.com
Telephone : +44 1285 842070

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>