tracer 5907512866351 Poweraudio King TWS BT Speakers Instruction Manual

tracer 5907512866351 Poweraudio King TWS BT Speakers

Cautions

• Do not hit or crush it seriously.
• Do not contact benzene, diluent and other chemicals.
• Do not use near by strong magnetic field or electric field.
• Avoid direct rays or heating appliances.
• Do not disassemble, repair or modify.
• Do not listen at large volume for long periods of time, so as not to injure the hearing.
• Do not clean the speaker with water and don’t immerse the speaker in the water. If use the speaker not by the right way and cause any quality problems, not support warranty. Kindly note above!. Please clean the speaker with a slightly damp cloth.
• When using at low voltage, it may cause distortion of sound and please charge it in time.
• Bluetooth is compatible with common smart phones and tablets, but depending on the device or application you use, may not be able to support a particular feature.

To ensure correct operation and avoid damage, please read this user manual carefully before using this product.

PANEL FUNCTION DECLARATION

1. USB/TF/AUX
2. Mic input
3. DC input
4. Power ON/OFF
5. Adjust volume of microphone
6. Echo
7. Adjust volume of whole unit
8. Bass
9. Treble
10. Previous song
11. Play/pause
12. Next song
13. Interchange
14. Light switch
15. Rec

REC FUNCTION DECLARATION

HOW TO USE REC?

Step 1: Make sure the unit is working, put the USB or TF card into the Slot.

Step 2: Turning on the wired or wireless microphone, make sure it is working normally by speaking some words, example “hello”, if the microphone works well, you can start the record.

Step 3: Long Press the button ”REC” then to start recording, you are freely to record what you want. Short Press the button “REC” to play record when you finish the recording.

REMOTE FUNCTION DECLARATION

1. MUTE: Press this button to mute the unit.
2. Press this button to toggle between the various in puts(AUX,USB,SD,FM,BLUETOOTH), Long press this button to turn on/turn off the voice prompt.
3. Press this button to start recording.
4. Press this button to increase the master volume for the unit.
5. Press this button to pause or play the unit when it is on the mode of USB. When it is on the mode of FM,press this button to auto scan all channels. Long press to change language to Chinese/ English for the voice prompt.
6. Press this button to select the previous song/ channel.
7. Press this button to reduce the master volume for the unit.
8. Press this button to repeat one/repeat all.
9. Press this button to play the recording.
10. Press this button to select the next song/channel.
11. Press this button to the EQ mode of Normal,Jazz,Rock,Pop,Classical.
12. 0-9,Key number for selecting the certain songs in the USB/SD/TF Card.

OPERATION OF FM RECEIVING FUNCTION

• PLAY/PAUSE key-pressing: press the key and the radio will scan the local radio station and save it automatically.
• NEXT + key-pressing: press the key and the radio will read the saved radio station and select the next one in ascending order;
• PREV – key-pressing: press the key and the radio will read the saved radio station and select the previous one in descending order;

Note: MODE key is used to switch radio status in order to use radio key- pressing function; if the receiving frequency needs inputting manually, press the numbers on remote control directly to input the frequency of radio station.

BLUETOOTH FUNCTION DECLARATION

Step 1: Press the mode button on front panel to launch the bluetooth application.Then you will see that ‘bluetooth’ logo show on the screen.

Step 2: Slide the ‘bluetooth’ switch to ‘on’.Your others devices with bluetooth function,like smart phone ,computer or others,then it automatically begins scanning for nearby bluetooth devices.

Step 3: When the „TRACER King” appears on your devices, tap to connect it. It will show” Connected” on your device after connected successfully. Depending on which device you are trying to connect the speaker to, it may be necessary to enter a passcode. Enter passcode „0000” if prompted by the device.

Step 4: Tap the entry for bluetooth accessory when it is detected by the smart phone or computer and displayed on the screen.Then it can use bluetooth to operate in conjunction with accessory.

TWS FUNCTION

1. Trun on two speakers at the same time and change to Bluetooth fuction.
2. Long pressing the next button for three seconds with one of the speaker,it will mention “Bluetooth Connected”.
3. After pairing, you can connect with the phone and start to play the music.

INSTRUCTION OF U DISK MP3 ENCODING PLAYING (USB)

When you need to use the built-in MP3 encoding function, please format your U disk (USB for short below) as FAT32 format in computer first and then copy the file in MP3 format in USB. When reading USB, the encoding system will engage in encoding playing according to the generation sequence of MP3 songs file. Therefore, the song which is copied to USB first will be played in priority or vice versa. When the user needs to play according to the specific sequence, they can arrange the copying sequence. If the files copied to USB can not be played, please inspect whether the file format is in MP3 format. If not, please switch to MP3 format in computer and then copy to USB in order to play normally. When copying MP3 file, you shall copy to the catalogue of USB. It is suggested to delete all the unnecessary files and file catalogues in order to reduce the occurrence of reading error when the encoding is played. When the user buys USB, please select the ones with better quality and internal encoding supporting 64MB/128MB/256MB/5 12MB/1GB/2GB/4GB/8GB and other volumes. During the playing process, please make it far away from the places with high temperature, high magnetic field and high frequency interference. In case of crash, please close the power and restart for recovery!

BASIC OPERATION OF WIRED MICROPHONE

• Turn the power switch on microphone to “ON”. Before using wireless microphone, please extend the rod antenna and make it vertically upward, so as to reach a better receiving effect.
• Adjust the microphone volume knob on the audio amplifier and adjust its position according to the sound volume when singing, so as to reach the ideal effect.
• To reach the best singing effect, the distance between mouth and microphone shall be 5-15CM and the best angle is 45degrees.

CHARGING INDICATOR

• Charging: the led light will be in red color
• Full: when full-charging the led light will be in green color.
• Charging time: 5 to 6 hours.
• Working time: 2 to 10 hours.

TECHNICAL SPECIFICATIONS

• Bluetooth version: 5.0
• Frequency range: 2.4-2.48Ghz
• Working distance: up to 15 meters in open space
• Supporting: USB/SD card play
• FM Radio: frequency 87.5 ~1080MHz
• Remote Control: up to 5 meters in open Space
• LED light with on/of Switch
• Output power: 40W
• Distortion: ≤ 1.0%
• Frequency response: 180Hz – 20Khz
• Microphone sensitivity: -40dB
• Working time: Music time up to 10 hours
• Input jack: Aux input ,wired microphone input
• Charging input power: DC 9V (Adapter)
• Charging time: 5 to 6 hours
• Adapter:
  • Input: AC~110-240V, 600mA, 50/60Hz
  • Output: DC 9V, 1.5A

Parameters of the included power supply

The manufacturer’s name| Megabajt Sp. z o.o.
Model identifier| QD-SPQ-03
Input voltage| 100-240V
AC input frequency| 50/60Hz
Output voltage| DC 9,0 V
Output current| 1,5 A
Output power| 13,5 W
Average efficiency during work| 86,11%
Efficiency at low load| 85,63%
No-load power consumption| 0.09W

INSTRUCTION

1. This unit has chargeable battery, when the battery power is finish, kindly plug the switch to electric socket according to input voltage,
2. When the unit is chargin please make sure AC/ DC switch should be on, once change please unplug the socket from electricity safely. You have to charge the battery for 10 to 12 hours for the first use, next time onward you have to recharge the battery for 8 to 10 hours. Battery normal working time is 3 to 10 hours accordings to the volume of speaker.
3. In order to keep battery life longer, kindly charge the battery every time after the battery power is finish, or it will damage the battery if you keep it long time without charge or not using it for long period of time, so kindly use it after regular interval of time.

COMMON SIMPLE FAULTS AND GUIDANCE FOR OPERATION AND REPAIR

Fault

phenomenon

| Simple fault

analysis

| Troubleshooting
---|---|---
Failing to electrify| The power switch is not opened

The electricity quantity of built-in battery is totally consumed

| Open power

switch Use power adaptor to charge the battery

No sound| Failing to input

sound source

| Change signal source
Failing to establish signal line| Reconnect signal line
Main volume is switched to minimum| Properly adjust the volume knob
U disk playing

has no sound

| Inspect U disk

or audio switch

Faults with external signal source| Change signal source
Poor contact or damage of external signal line| Readjust or change signal line

Totally insert the microphone to the jack

External microphone has

no sound

| External microphone is not fully inserted in the jack|
The external microphone switch is not opened| Open the switch of microphone
The volume knob of microphone is off| Properly adjust the

volume knob of

microphone

If there is still fault after the inspection above, please contact the nearest local maintenance department! This unit is high power, so please don’t open it.

Symbol of electronic and electrical equipment waste (WEEE – Waste Electronic and Electrical Equipment)

Using the WEEE symbol means that this product cannot be treated as household waste. By providing appropriate recycling you help to save the natural environment. In order to get more detailed information about the recycling of this product, contact the local authority representative, waste treatment service provider or the store in which the product has been purchased.

Producent: Megabajt Sp. z o.o., ul. Rydygiera 8, 01-793 Warszawa

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>