tracer 2.2S FHD Draco Car Camera 2.2S FHD Instruction Manual

tracer 2.2S FHD Draco Car Camera 2.2S FHD

OVERVIEW

1. Power ON/OFF/OK
2. Mode/Menu
3. Up button
4. Down button
5. Suction cup holder
6. Micro USB socket – power/data
7. TF card slot
8. Reset button
9. Lens
10. Speaker
11. LED screen

Safety instructions

• Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquids.
• Do not operate the unit if it has been exposed to water, moisture or any other liquids to prevent against electric shock, explosion and/or injury to yourself and damage to the unit.
• Do not use the unit if it has been dropped or damaged in any way.
• Repairs to electrical equipment should only be performed by a qualified electri­cian. Improper repairs may place the user at serious risk.
• Do not use the unit with wet hands.
• Do not use this unit for anything other than its intended use.
• Keep the unit out of reach of children. This appliance is not a toy.
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat place, such as sunshine, fire.

Button functions

1. Power ON/OFF/OK
   When the device is in OFF position, press and hold button for 2 sec. to turn ii ON. Camera will start working automatically. To turn OFF, also please press button for 2sec.

2. Recording/camera/player/ – MENU

   • Short press to enter different modes. You may choose recording, camera, play­back.
   • In the recording mode, press OK to start recording, and press OK again to stop recording.
   • In camera mode short press OK to take a photo.
   • In playback mode. When you enter file browsing, short press OK to play the video file and pause the video file.
   • MENU. In the standby mode, short press Menu to enter the main menu function setting table, short press Up or Down to select the option to be set, press OK to confirm. After setting, press Menu shortly to exit the menu setting function. You may set Parking Mode, G-sensor, video recording quality etc.

3. Up/down

   • In the menu settings and playback mode, it is the page up function.
   • In playback mode, press Up to rewind.
   • In the recording mode, press Down button to turn off the recording function. At this time, the microphone at the top left of the screen becomes a prohibition icon, indicating that the recording function has been turned off. Press again to turn on the recording and the icon to turn on recording.

Page down function

  * The page down function is available in the menu settings and playback mode. Function three: fast forward
  * In playback mode, press [Down] to fast forward.

4. Reset button
   In the case that the machine crashes and cannot be turned on and off normally, press and hold the reset button to reset the machine to restart.

5. USB power/data
   USB power/data interface. Is used to connect external power supply to charge battery or provide working power and if needed also is used to connect PC to transmit data.

Installation guide

1. Turn off the car engine.
2. Insert the TF card into the recorder card slot. Please use high-speed TF card (Class10 or higher), the capacity 8-32GB
3. Fix the recorder to the suction cup bracket on the glass of the car.
4. Insert the car charger into the car cigarette lighter.
5. Connect the USB port to the car charger with a charging extension cable. The wiring extension cable can be laid along the edge of the windshield of the car during wiring.
6. Adjust the lens position to ensure that the lens is level with the ground.
7. Start the engine and check that the machine is installed correctly. When the machine is installed correctly, the system work indicator lights up; the machine starts to enter the recording state, and the recording indicator flashes. Please check if the picture on the display is normal.

Function profile

1. Use automatic recording
   When the car engine is started, the recorder automatically starts up and turns on the recording function, the charging indicator lights up, and the recording indicator flashes. Turn off the car engine and the recorder automatically saves the recorded content and shuts down. The recorded image is saved on the TF card. When the TF card is full, the recorder will overwrite the image recorded earlier. The recorded time period can be set in the menu by itself, and the range is 1 minute/ 2 minutes/ 3 minutes.
   movies will be saved in this location ,,DCIMA”.

2. Collision sensor – G-sensor
   Device has the built-in collision sensor (G-sensor). If a collision occurs, the recor­der will lock the recording when the accident occurred and save it as a special image. The lock icon will be displayed in the upper left corner of the display. The locked image will not be covered by the loop.
   The locked recording file name is the beginning of SOS.

3. Date and time settings
   In the standby state, press Menu to enter the system setting menu to set date and clock.
   In order to effectively record the date and time of the forensic accident, please set the correct time before using the machine.

4. Parking monitoring
   When the parking monitoring function is turned on, if the car is slightly vibrated in the off state, the recorder will automatically start recording. If it is in the off state, it will record for 20 seconds and then shut down.

Product specification

Operation method

Video format

| 4 button

MOV

Image Format

Operating temperature

| JPEG

-10°C-60°C

Operatina humiditv

Memory card capacity

| 15-65% RH

Maximum support 32GB class 10

Battery

Horn

| 200mAh

Built in

MIC| Built in
Standard Voltage| DC5V 1.5A

Producent:
Megabajt Sp. z o.o., ul. Rydygiera 8, 01-793 Warszawa

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>