tracer 46935 2.2S FHD Draco Instruction Manual
- June 4, 2024
- Tracer
Table of Contents
tracer 46935 2.2S FHD Draco
INSTRUCTION
- Power ON/OFF/OK
- Mode/Menu
- Up button
- Down button
- Suction cup holder
- Micro USB socket – power/data
- TF card slot
- Reset button
- Lens
- Speaker
- LED screen
Safety instructions
-
Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquids.
-
Do not operate the unit if it has been exposed to water, moisture or any other
liquids to prevent against electric shock, explosion and/or injury to yourself and damage to the unit. -
Do not use the unit if it has been dropped or damaged in any way.
-
Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
-
Do not use the unit with wet hands.
-
Do not use this unit for anything other than its intended use.
-
Keep the unit out of reach of children. This appliance is not a toy.
-
Batteries (battery pack or batteries installed) shall not be exposed to excessive heat place, such as sunshine, fire.
Button functions
Power ON/OFF/OK
- When the device is in OFF position, press and hold the button for 2 sec. to turn it ON. The camera will start working automatically. To turn it OFF, also please press the button for 2sec.
Recording/camera/player/ – MENU
- Short press to enter different modes. You may choose recording, camera, or playback. In the recording mode, press OK to start recording, and press OK again to stop recording.
- In camera mode short press OK to take a photo.
- In playback mode. When you enter file browsing, short press OK to play the video file and pause the video file.
- MENU. In the standby mode, short press Menu to enter the main menu function setting table, short press Up or Down to select the option to be set, and press OK to confirm. After setting, press Menu shortly to exit the menu setting function. You may set Parking Mode, G-sensor, video recording quality etc.
Up/down
- In the menu settings and playback mode, it is the page-up function.
- In playback mode, press Up to rewind.
- In the recording mode, press the Down button to turn off the recording function. At this time, the microphone at the top left of the screen becomes a prohibition icon, indicating that the recording function has been turned off. Press again to turn on the recording and the icon to turn on the recording.
Page down function
- The page-down function is available in the menu settings and playback mode. Function three: fast forward
- In playback mode, press [Down] to fast forward.
Reset button
In the case that the machine crashes and cannot be turned on and off normally,
press and hold the reset button to reset the machine to restart.
USB power/data
USB power/data interface. Is used to connect the external power supply to
charge the battery or provide working power and if needed also is used to
connect PC to transmit data.
Installation guide
- Turn off the car engine.
- Insert the TF card into the recorder card slot. Please use a high-speed TF card (Class10 or higher), a capacity 8-32GB
- Fix the recorder to the suction cup bracket on the glass of the car.
- Insert the car charger into the car cigarette lighter.
- Connect the USB port to the car charger with a charging extension cable. The wiring extension cable can be laid along the edge of the windshield of the car during wiring.
- Adjust the lens position to ensure that the lens is level with the ground.
- Start the engine and check that the machine is installed correctly. When the machine is installed correctly, the system work indicator lights up; the machine starts to enter the recording state, and the recording indicator flashes. Please check if the picture on the display is normal.
Function profile.
Use automatic recording
- When the car engine is started, the recorder automatically starts up and turns on the recording function, the charging indicator lights up, and the recording indicator flashes. Turn off the car engine and the recorder automatically saves the recorded content and shuts down. The recorded image is saved on the TFcard. When the TF card is full, the recorder will overwrite the image recorded earlier. The recorded time period can be set in the menu by itself, and the range is 1 minute / 2 minutes / 3 minutes.
- movies will be saved in this location „DCIMA”.
Collision sensor – G-sensor
The device has a built-in collision sensor (G-sensor). If a collision occurs,
the recorder will lock the recording when the accident occurred and save it as
a special image. The lock icon will be displayed in the upper left corner of
the display. The locked image will not be covered by the loop. The locked
recording file name is the beginning of SOS.
Date and time settings
In the standby state, press Menu to enter the system setting menu to set date
and clock. In order to effectively record the date and time of the forensic
accident, please set the correct time before using the machine.
Parking monitoring
When the parking monitoring function is turned on, if the car is slightly
vibrated in the off state, the recorder will automatically start recording. If
it is in the off state, it will record for 20 seconds and then shut down.
Product specification
- Display 2.2-inch IPS
- Operation method 4 button
- Video format MOV
- Image Format JPEG
- Operating temperature -10°C~60°C
- Operating humidity 15-65% RH
- Memory card capacity Maximum support 32GB class 10
- Battery 200mAh
- Horn Built-in
- MIC Built-in
- Standard Voltage DC5V 1.5A
The symbol of a crossed-out wheeled bin placed on electronic or electrical equipment, its packaging or accompanying documents means that the product may not be thrown out together with other waste. Used equipment may contain substances with toxic and carcinogenic properties, hazardous to human health and life, and poisoning the soil and groundwater. It is the user’s responsibility to hand over the used equipment to a designated collection point for its proper processing. For more information on recycling of electronic and electrical equipment, please contact your local authorities, waste disposal services and the place where you purchased this product. The household plays an important role in contributing to the reuse and recovery of secondary raw materials, including recycling, waste equipment. At this stage, attitudes are formed that affect the preservation of the common good, which is a clean natural environment.
Producent:
Megabajt Sp. z o.o., ul. Rydygiera 8, 01-793 Warszawa
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>