Nikon ZZ50 Digital Camera User Manual

Nikon ZZ50 Digital Camera

Product Usage Instructions

About This Manual

The manual provides detailed operating instructions for the Nikon Z 50 digital camera. It includes symbols and conventions to help you navigate through the information easily.

Camera Settings

The manual assumes default settings are used for explanations. Before using the camera, ensure to read the safety instructions in the manual.

Getting to Know the Camera

1. Parts of the Camera: Familiarize yourself with the camera body, monitor, viewfinder, and the G Button.
   • Camera Body: Learn about the physical components and buttons on the camera.
   • The Monitor and Viewfinder: Understand how to use both the monitor and viewfinder for composing shots.
   • The G Button: Explore the functionality of the G Button on the camera.

FAQs

• Where can I download firmware updates and software for my Nikon Z 50?
  • You can visit the Nikon Download Center at https://downloadcenter.nikonimglib.com/ to download firmware updates, NX Studio, manuals, and other Nikon software.
• What type of memory cards are compatible with the Nikon Z 50?
  • The Nikon Z 50 is compatible with SD, SDHC, and SDXC memory cards. Ensure to use a compatible memory card for optimal performance.

“`

DIGITAL CAMERA
User’s Manual (with Warranty)
· Read this manual thoroughly before using the camera. · To ensure proper use of the camera, be sure to read
“For Your Safety” (page x). · After reading this manual, keep it in a readily accessible
place for future reference. Scan for detailed operating instructions.
En
nikon download center Z 50

Package Contents
Be sure all items listed here were included with your camera.
BF-N1 body cap

Camera

DK-30 rubber eyecup (comes attached to camera)

EN-EL25 rechargeable Li-ion battery with terminal cover MH-32 battery charger (plug adapter supplied in countries or regions where required; shape depends on country of sale) Strap (0 9)

Warranty (printed on the back cover of this manual) User’s Manual UC-E21 USB cable

Memory cards are sold separately. Purchasers of the lens kit option should confirm that the package also includes a lens (manuals for the lens may also be provided).

The Nikon Download Center
A pdf version of this manual is available from the Nikon Download Center, together with an English-language reference manual with detailed operating instructions, which can be downloaded in pdf format or viewed online in html. Visit the Nikon download center to download firmware updates, NX Studio and other Nikon software, and manuals for Nikon products including cameras, NIKKOR lenses, and flash units. https://downloadcenter.nikonimglib.com/
Z 50 Model Name: N1912
ii

About This Manual

Symbols and Conventions
To make it easier to find the information you need, the following symbols and conventions are used:
D This icon marks notes, information that should be read before using this product.
A This icon marks tips, additional information you may find helpful when using this product.
0 This icon marks references to other sections in this manual.
Menu items, options, and messages that appear in the camera displays are shown in bold. Throughout this manual, the display in camera monitor and viewfinder during shooting is referred to as the “shooting display”; in most cases, the illustrations show the monitor. This camera uses SD, SDHC, and SDXC memory cards, referred to throughout this manual as “memory cards”. Throughout this manual, smartphones and tablets are referred to as “smart devices”.
Camera Settings
The explanations in this manual assume that default settings are used.
A For Your Safety Before using the camera for the first time, read the safety instructions in “For Your Safety” (0 x).
Nikon User Support
Visit the site below to register your camera and keep up-to-date with the latest product information. You will find answers to frequently asked questions (FAQs) and can contact us for technical assistance. https://www .europe-nikon.com/support
iii

Menu List

The camera offers the following menus. For a more complete description of individual menu items, refer to the “Menu Guide” chapter in the Reference Manual.

PLAYBACK MENU Delete Playback folder Playback display options Image review After delete Rotate tall Slide show Rating
PHOTO SHOOTING MENU Reset photo shooting menu Storage folder File naming Choose image area Image quality Image size NEF (RAW) recording ISO sensitivity settings White balance Set Picture Control Manage Picture Control Color space

PHOTO SHOOTING MENU Active D-Lighting Long exposure NR High ISO NR Vignette control Diffraction compensation Auto distortion control Flicker reduction shooting Metering Flash control Flash mode Flash compensation Release mode Focus mode AF-area mode Optical VR Auto bracketing Multiple exposure HDR (high dynamic range) Interval timer shooting Time-lapse movie Silent photography

vi

MOVIE SHOOTING MENU Reset movie shooting menu File naming Frame size/frame rate Movie quality Movie file type ISO sensitivity settings White balance Set Picture Control Manage Picture Control Active D-Lighting High ISO NR Vignette control Diffraction compensation Auto distortion control Flicker reduction Metering Release mode (save frame) Focus mode AF-area mode Optical VR Electronic VR Microphone sensitivity Attenuator Frequency response Wind noise reduction

CUSTOM SETTING MENU

Reset custom settings

a Autofocus

a1 AF-C priority selection

a2

Auto-area AF face/eye detection

a3 Focus points used

a4 AF activation

a5 Focus point wrap-around

a6 Focus point options

a7 Low-light AF

a8

Built-in AF-assist illuminator

a9

Manual focus ring in AF mode

b Metering/exposure

b1 EV steps for exposure cntrl

b2

Easy exposure compensation

b3 Center-weighted area

b4

Fine-tune optimal exposure

c Timers/AE lock

c1

Shutter-release button AE-L

c2 Self-timer

c3 Power off delay

vii

CUSTOM SETTING MENU

d Shooting/display

d1 CL mode shooting speed

d2 Max. continuous release

d3 Exposure delay mode

d4 Shutter type

d5

Limit selectable image area

d6 File number sequence

d7 Apply settings to live view

d8 Framing grid display

d9 Peaking highlights

d10

View all in continuous mode

e Bracketing/flash

e1 Flash sync speed

e2 Flash shutter speed

e3 Exposure comp. for flash

e4

Auto c ISO sensitivity control

e5 Bracketing order

CUSTOM SETTING MENU

f Controls

f1 Customize i menu

f2

Custom controls (shooting)

f3

Custom controls (playback)

f4 Customize command dials

f5 Release button to use dial

f6 Reverse indicators

g Movie

g1 Customize i menu

g2 Custom controls

g3 AF speed

g4 AF tracking sensitivity

g5 Highlight display

viii

SETUP MENU Format memory card Save user settings Reset user settings Language Time zone and date Monitor brightness Viewfinder brightness Viewfinder color balance Information display AF fine-tune Image Dust Off ref photo Image comment Copyright information Beep options Touch controls Self-portrait mode HDMI Location data display Airplane mode Connect to smart device Connect to PC Wireless remote (ML-L7) options Conformity marking Energy saving Slot empty release lock Reset all settings Firmware version

RETOUCH MENU NEF (RAW) processing Trim Resize D-Lighting Quick retouch Red-eye correction Straighten Distortion control Perspective control Image overlay Trim movie Side-by-side comparison
MY MENU Add items Remove items Rank items Choose tab Can only be displayed by pressing i and selecting Retouch when a retouched image or original is displayed.

ix

For Your Safety

To prevent damage to property or injury to yourself or to others, read “For Your Safety” in its entirety before using this product. Keep these safety instructions where all those who use this product will read them.
DANGER: Failure to observe the precautions marked with this icon carries a high risk of death or severe injury.
WARNING: Failure to observe the precautions marked with this icon could result in death or severe injury.
CAUTION: Failure to observe the precautions marked with this icon could result in injury or property damage.
WARNING
· Do not use while walking or operating a vehicle. Failure to observe this precaution could result in accidents or other injury.
· Do not disassemble or modify this product. Do not touch internal parts that become exposed as the result of a fall or other accident. Failure to observe these precautions could result in electric shock or other injury.
· Should you notice any abnormalities such as the product producing smoke, heat, or unusual odors, immediately disconnect the battery or power source. Continued operation could result in fire, burns or other injury.
· Keep dry. Do not handle with wet hands. Do not handle the plug with wet hands. Failure to observe these precautions could result in fire or electric shock.
· Do not let your skin remain in prolonged contact with this product while it is on or plugged in. Failure to observe this precaution could result in low- temperature burns.
· Do not use this product in the presence of flammable dust or gas such as propane, gasoline or aerosols. Failure to observe this precaution could result in explosion or fire.
x

· Do not directly view the sun or other bright light source through the lens. Failure to observe this precaution could result in visual impairment.
· Do not aim the flash or AF-assist illuminator at the operator of a motor vehicle. Failure to observe this precaution could result in accidents.
· Keep this product out of reach of children. Failure to observe this precaution could result in injury or product malfunction. In addition, note that small parts constitute a choking hazard. Should a child swallow any part of this product, seek immediate medical attention.
· Do not entangle, wrap or twist the straps around your neck. Failure to observe this precaution could result in accidents.
· Do not use batteries, chargers, AC adapters, or USB cables not specifically designated for use with this product. When using batteries, chargers, AC adapters, and USB cables designated for use with this product, do not: – Damage, modify, forcibly tug or bend the cords or cables, place them under heavy objects, or expose them to heat or flame. – Use travel converters or adapters designed to convert from one voltage to another or with DC-to-AC inverters. Failure to observe these precautions could result in fire or electric shock.
· Do not handle the plug when charging the product or using the AC adapter during thunderstorms. Failure to observe this precaution could result in electric shock.
· Do not handle with bare hands in locations exposed to extremely high or low temperatures. Failure to observe this precaution could result in burns, or frostbite.
CAUTION
· Do not leave the lens pointed at the sun or other strong light sources. Light focused by the lens could cause fire or damage to product’s internal parts. When shooting backlit subjects, keep the sun well out of the frame. Sunlight focused into the camera when the sun is close to the frame could cause fire.
xi

· Turn this product off when its use is prohibited. Disable wireless features when the use of wireless equipment is prohibited. The radio-frequency emissions produced by this product could interfere with equipment onboard aircraft or in hospitals or other medical facilities.
· Remove the battery and disconnect the AC adapter if this product will not be used for an extended period. Failure to observe this precaution could result in fire or product malfunction.
· Do not fire the flash in contact with or in close proximity to the skin or objects. Failure to observe this precaution could result in burns or fire.
· Do not leave the product where it will be exposed to extremely high temperatures, for an extended period such as in an enclosed automobile or in direct sunlight. Failure to observe this precaution could result in fire or product malfunction.
· Do not look directly at the AF-assist illuminator. Failure to observe this precaution could have adverse effects on vision.
· Do not transport cameras or lenses with tripods or similar accessories attached. Failure to observe this precaution could result in injury or product malfunction.
DANGER (Batteries)
· Do not mishandle batteries. Failure to observe the following precautions could result in the batteries leaking, overheating, rupturing, or catching fire: – Use only rechargeable batteries approved for use in this product. – Do not expose batteries to flame or excessive heat. – Do not disassemble. – Do not short-circuit the terminals by touching them to necklaces, hairpins, or other metal objects. – Do not expose batteries or the products in which they are inserted to powerful physical shocks. – Do not step on batteries, pierce them with nails, or strike them with hammers.
xii

· Charge only as indicated. Failure to observe this precaution could result in the batteries leaking, overheating, rupturing, or catching fire.
· If battery liquid comes into contact with the eyes, rinse with plenty of clean water and seek immediate medical attention. Delaying action could result in eye injuries.
· Follow the instructions of airline personnel. Batteries left unattended at high altitudes in an unpressurized environment may leak, overheat, rupture, or catch fire.
WARNING (Batteries)
· Keep batteries out of reach of children. Should a child swallow a battery, seek immediate medical attention.
· Keep batteries out of reach of household pets and other animals. The batteries could leak, overheat, rupture, or catch fire if bitten, chewed, or otherwise damaged by animals.
· Do not immerse batteries in water or expose to rain. Failure to observe this precaution could result in fire or product malfunction. Immediately dry the product with a towel or similar object should it become wet.
· Discontinue use immediately should you notice any changes in the batteries, such as discoloration or deformation. Cease charging EN-EL25 rechargeable batteries if they do not charge in the specified period of time. Failure to observe these precautions could result in the batteries leaking, overheating, rupturing, or catching fire.
· When batteries are no longer needed, insulate the terminals with tape. Overheating, rupture, or fire may result should metal objects come into contact with the terminals.
· If battery liquid comes into contact with a person’s skin or clothing, immediately rinse the affected area with plenty of clean water. Failure to observe this precaution could result in skin irritation.
xiii

Notices

· No part of the manuals included with · Nikon will not be held liable for any

this product may be reproduced,

damages resulting from the use of

transmitted, transcribed, stored in a this product.

retrieval system, or translated into · While every effort has been made to

any language in any form, by any

ensure that the information in these

means, without Nikon’s prior written manuals is accurate and complete,

permission.

we would appreciate it were you to

· Nikon reserves the right to change bring any errors or omissions to the

the appearance and specifications attention of the Nikon

of the hardware and software

representative in your area (address

described in these manuals at any provided separately).

time and without prior notice.

xiv

Notice Concerning Prohibition of Copying or Reproduction Note that simply being in possession of material that has been digitally copied or reproduced by means of a scanner, digital camera, or other device may be punishable by law.

· Items prohibited by law from being copied · Cautions on certain copies and

or reproduced

reproductions

Do not copy or reproduce paper

The government has issued cautions

money, coins, securities,

on copies or reproductions of

government bonds, or local

securities issued by private

government bonds, even if such

companies (shares, bills, checks, gift

copies or reproductions are

certificates, etc.), commuter passes,

stamped “Sample.”

or coupon tickets, except when a

The copying or reproduction of paper money, coins, or securities which are circulated in a foreign country is prohibited.

minimum of necessary copies are to be provided for business use by a company. Also, do not copy or reproduce passports issued by the government, licenses issued by

Unless the prior permission of the public agencies and private groups,

government has been obtained, the ID cards, and tickets, such as passes

copying or reproduction of unused and meal coupons.

postage stamps or post cards issued

by the government is prohibited.

· Comply with copyright notices Under copyright law, photographs

The copying or reproduction of

or recordings of copyrighted works

stamps issued by the government made with the camera cannot be

and of certified documents

used without the permission of the

stipulated by law is prohibited.

copyright holder. Exceptions apply

to personal use, but note that even

personal use may be restricted in

the case of photographs or

recordings of exhibits or live

performances.

xv

Use Only Nikon Brand Electronic Accessories Nikon cameras are designed to the highest standards and include complex electronic circuitry. Only Nikon brand electronic accessories (including lenses, chargers, batteries, charging AC adapters, and flash accessories) certified by Nikon specifically for use with this Nikon digital camera are engineered and proven to operate within the operational and safety requirements of this electronic circuitry.
The use of non-Nikon electronic accessories could damage the camera and may void your Nikon warranty. The use of third-party rechargeable Li-ion batteries not bearing the Nikon holographic seal shown at right could interfere with normal operation of the camera or result in the batteries overheating, igniting, rupturing, or leaking.
For more information about Nikon brand accessories, contact a local authorized Nikon dealer.
D Before Taking Important Pictures
Before taking pictures on important occasions (such as at weddings or before taking the camera on a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable for damages or lost profits that may result from product malfunction.
D Life-Long Learning
As part of Nikon’s “Life-Long Learning” commitment to ongoing product support and education, continually-updated information is available on-line at the following sites: · For users in the U.S.A.: https://www.nikonusa.com/ · For users in Europe: https://www.europe-nikon.com/support/ · For users in Asia, Oceania, the Middle East, and Africa:
https://www.nikon-asia.com/ Visit these sites to keep up-to-date with the latest product information, tips, answers to frequently-asked questions (FAQs), and general advice on digital imaging and photography. Additional information may be available from the Nikon representative in your area. See the following URL for contact information: https://imaging.nikon.com/
xvi

Getting to Know the Camera

Take a few minutes to familiarize yourself with the names and functions of camera controls and displays. You may find it helpful to bookmark this section and refer to it as you read through the rest of the manual.

Parts of the Camera
Refer to this section for the names and locations of camera controls and displays.

Camera Body

4

5

2

3

6

7

8

1

1

9

13 12

11 10

1 Eyelet for camera strap……………….9 8 S button

2 Stereo microphone………………….. 23 9 Main command dial

3 Speaker…………………………………….. 25 10 Photo/movie selector…………18, 22

4 Movie-record button ………………. 22 11 Mode dial

5 Power switch……………………….17, 18 12 Accessory shoe (for optional flash

6 Shutter-release button……………. 18 unit)

7 E button

13 Focal plane mark (E)

Getting to Know the Camera 1

The Camera Body (Continued)

1

2

3

4

8

9

5

10

11

76

12

1 AF-assist illuminator …………………20 6 Lens mounting mark ………………..15

Red-eye reduction lamp

7 Image sensor

Self-timer lamp

8 Connector for external

2 Built-in flash

microphone

3 Flash pop-up control

9 USB connector

4 Cover for microphone connector 10 Charge lamp

5 Cover for USB and HDMI

11 HDMI connector

connectors

12 Body cap……………………………………15

2 Getting to Know the Camera

12 3 4 5

6

7 8
9

17 16 15 14 13 12 11 10

1 Monitor mode button

10 G button…………………………….vi, 7

2 Viewfinder eyepiece

11 O button ………………………………….. 26

3 Viewfinder

12 K button ………………………………… 24

4 Eye sensor

13 i button

5 Diopter adjustment control

14 DISP button

6 A (L) button

15 W button……………………………. 25

7 J button …………………………………….8 16 X button ………………………………….. 25

8 Multi selector ………………………………8 17 Monitor

9 Memory card access lamp ………. 21

D The Monitor
The angle of the monitor can be adjusted as shown.

Touching these parts could damage the product.
Getting to Know the Camera 3

The Camera Body (Continued) 6

7 1

2

8

3

4

9

5

10 11

1 Sub-command dial

7 Lens release button ………………….16

2 Fn1 button

8 CPU contacts

3 Fn2 button

9 Tripod socket

4 Battery-chamber cover latch……11 10 Battery latch ……………………………..11

5 Battery-chamber cover …………….11 11 Memory card slot ……………………..11

6 Lens mount ……………………………….15

Getting to Know the Camera

The Monitor and Viewfinder
At default settings, the following indicators appear in the monitor and viewfinder in photo mode.

Monitor

Viewfinder
21 23 24 3 4 5 6 7 8 10 9

1 23456 7 8

26 25

9 10 26

24

11

23

2

22

12 19

21

13

20 19 18 17 16 15 14

20 1 22 18 17 12 16 15 14 13

1 Shooting mode

12 Exposure indicator

2 Focus point………………………………. 20 Exposure compensation display

3 Release mode 4 Focus mode 5 AF-area mode 6 Active D-Lighting 7 Picture Control 8 White balance 9 Image size 10 Image quality

13 “k” (appears when memory remains for over 1000 exposures) ……………………………… 13
14 Number of exposures remaining ………………………………. 13
15 ISO sensitivity
16 ISO sensitivity indicator Auto ISO sensitivity indicator

11 i icon

Getting to Know the Camera 5

17 Aperture

22 Shutter type

18 Shutter speed

23 “Clock not set” indicator

19 Subject tracking

24 Optical VR indicator

20 Metering

25 Touch shooting

21 Battery indicator ……………………….13 26 AF-area brackets

The following items appear in movie mode.

Monitor

Viewfinder

1

24

1
8 7 6

2 3 4
5

6

78

53

1 Recording indicator ………………….22 Recording disabled …………………..23
2 Frame size and rate/ image quality
3 Time remaining…………………………22 4 File name

5 Release mode (still photography)
6 Sound level 7 Microphone sensitivity 8 Frequency response

6 Getting to Know the Camera

The G Button
Press the G button to view the menus.

1

1 D: Playback menu ……………………vi

2 3

2 C: Photo shooting menu…………vi

4

3 1: Movie shooting menu…………vii

5 6

9 4 A: Custom Settings menu……….vii

7

5 B: Setup menu…………………………… ix

8

6 N: Retouch menu…………………….. ix

7 O/m: My Menu or

recent settings (defaults to

My Menu)………………………………….ix

8 d: Help icon

Current settings

Getting to Know the Camera 7

Using the Menus You can navigate the menus using the multi selector and J
button.

1: Move cursor up

J: Select highlighted item

4: Cancel and return to previous menu

2: Select highlighted item or display sub-menu

3: Move cursor down
1 Highlight the icon for the
current menu. Press 4 to highlight the icon for the current menu.

2 Select a menu.
Press 1 or 3 to select the desired menu.

3 Position the cursor in the
selected menu. Press 2 to position the cursor in the selected menu.
8 Getting to Know the Camera

First Steps
Complete the steps in this chapter before taking pictures for the first time.
Attach the Camera Strap
A strap is supplied with the camera; additional straps are available separately. Attach the strap securely to the camera eyelets.
First Steps 9

Charge the Battery
The battery can be charged using the supplied battery charger. D The Battery and Charger
Read and follow the warnings and cautions in “For Your Safety” (0 x) and “Caring for the Camera and Battery: Cautions” (0 27).
The Battery Charger
Insert the battery and plug the charger in. An exhausted battery will fully charge in about 2 hours and 30 minutes.

In some countries or regions, charger may be supplied with adapter
connected.
The CHARGE lamp will flash while the battery charges.

Battery charging (flashing)

Charging complete (steady)

10 First Steps

Insert the Battery and a Memory Card
Before inserting or removing the battery or memory cards, confirm that the camera power switch is in the OFF position. Insert the battery in the orientation shown, using the battery to keep the orange battery latch pressed to one side. The latch locks the battery in place when the battery is fully inserted. Holding the memory card in the orientation shown, slide it straight into the slot until it clicks into place.
Front
First Steps 11

D Removing the Battery
To remove the battery, turn the camera off and open the battery-chamber cover. Press the battery latch in the direction shown by the arrow to release the battery and then remove the battery by hand.
D Removing Memory Cards
After confirming that the memory card access lamp is off, turn the camera off, open the battery-chamber cover, and press the card in to eject it (q). The card can then be removed by hand (w).
12 First Steps

Battery Level
The battery level is shown in the shooting display while the camera is on.

Monitor

Viewfinder

· The battery level display changes as the battery level diminishes, from L through K and finally to H. When the battery level falls to H, suspend shooting and charge the battery or ready a spare battery.
· If the message “Shutter release disabled. Recharge battery.” is displayed, charge or exchange the battery.

Number of Exposures Remaining
When the camera is on, the shooting display show the number of photographs that can be taken at current settings (values over 1000 are rounded down to the nearest hundred; e.g., values between 1400 and 1499 are shown as 1.4 k).

Monitor

Viewfinder

First Steps 13

D Memory Cards
· Memory cards may be hot after use. Observe due caution when removing memory cards from the camera.
· Turn the power off before inserting or removing memory cards. Do not remove memory cards from the camera, turn the camera off, or remove the battery during formatting or while data are being recorded, deleted, or copied to a computer or other device. Failure to observe these precautions could result in loss of data or in damage to the camera or card.
· Do not touch the card terminals with your fingers or metal objects. · Do not apply force to the card casing. Failure to observe this
precaution could damage the card. · Do not bend, drop, or subject to strong physical shocks. · Do not expose to water, heat, high levels of humidity, or direct
sunlight. · Do not format memory cards in a computer.
D No Memory Card
If no memory card is inserted, a “no memory card” indicator and [­E­] will appear in the shooting display.

A The Write Protect Switch

SD memory cards are equipped

with a write protect switch to

prevent accidental loss of data.

When this switch is in the “lock” position, the memory card cannot

Write-protect switch

be formatted and photos cannot

be deleted or recorded (a warning will be displayed in the monitor if

you attempt to release the shutter). To unlock the memory card, slide

the switch to the “write” position.

14 First Steps

Attach a Lens
The camera can be used with Z mount lenses. Before attaching or removing lenses, confirm that the camera power switch is in the OFF position. Be careful to prevent dust from entering the camera when the lens or body cap is removed, and be sure to remove the lens cap before taking pictures. The lens generally used in this manual for illustrative purposes is a NIKKOR Z DX 16­ 50mm f/3.5­6.3 VR.
Remove the camera body cap

Remove the rear lens cap

G Mounting mark (camera)

Align the mounting marks

Do not touch the image sensor or lens contacts. Mounting mark (lens)

Rotate the lens as shown until it clicks into place
First Steps 15

D F Mount Lenses
Be sure to attach the FTZ mount adapter (available separately) before using F mount lenses. Attempting to attach F mount lenses directly to the camera could damage the lens or image sensor.
D Detaching Lenses
Be sure the camera is off when removing or exchanging lenses. To remove the lens, press and hold the lens release button (q) while turning the lens clockwise (w). After removing the lens, replace the lens caps and camera body cap.
16 First Steps

Turn the Camera On
When you first turn the camera on, you will be prompted to choose a language using the multi selector and J button.

Press G and use the multi selector and J button to set the camera clock. No other operations can be performed until the clock is set.

q

w

Select time zone e

Select date format r

Select daylight saving time option

Set time and date (note that camera uses a 24-hour clock)

First Steps 17

Basic Photography and Playback
This chapter explains the basics of taking and viewing photos.
Taking Photographs (b Mode)
Follow the steps below to take photographs in b (auto) mode, an automatic “point-and-shoot” mode in which the majority of settings are controlled by the camera in response to shooting conditions.
1 Turn the camera on.
The monitor will light.
2 Select photo mode.
Rotate the photo/movie selector to C.
D Lenses with Retractable Barrels
Lenses with retractable barrels must be extended before use. Rotate the lens zoom ring as shown until the lens clicks into the extended position.
18 Basic Photography and Playback

3 Select b mode. Rotate the mode dial to b.
Mode dial
4 Ready the camera.
Hold the handgrip in your right hand and cradle the camera body or lens with your left. Bring your elbows in against the sides of your chest.
Framing photos in the viewfinder

Landscape (wide) orientation Framing photos in the monitor

Portrait (tall) orientation

Landscape (wide) orientation

Portrait (tall) orientation

Basic Photography and Playback 19

5 Frame the photograph.
Frame the shot with your subject in
the AF-area brackets.

AF-area brackets

6 Press the shutter-release button

halfway to focus.

· If the subject is stationary, the focus

point will be displayed in green

when the camera focuses. If the

camera is unable to focus, the AF-

area brackets will flash. If the subject

is in motion, the camera will

continue to adjust focus in response

to changes in the distance to the

Focus point

subject while the shutter-release

button is pressed halfway; focus will not lock.

· The AF-assist illuminator may light to assist the focus

operation if the subject is poorly lit.

D The AF-Assist Illuminator
Do not obstruct the AF-assist illuminator while it is lit.

20 Basic Photography and Playback

Shoot

Smoothly press the shutter-release button the rest of the way down to take the photograph (you can also take a photograph by touching the monitor: touch your subject to focus and lift your finger to release the shutter). The memory card access lamp will light while the photo is recorded to the memory card. Do not eject the memory card or remove the battery until the lamp has gone out and recording is complete.

Memory card access lamp

D The Standby Timer
If no operations are performed for about 30 seconds, the display will dim before the monitor and viewfinder turn off to reduce the drain on the battery. Press the shutterrelease button halfway to reactivate the display. The length of time before the standby timer expires automatically can be selected using Custom Setting c3 (Power off delay) > Standby timer.
Basic Photography and Playback 21

Shooting Movies (b Mode)
b (auto) mode can also be used for simple, “point-and-shoot” movie recording.
1 Turn the camera on.
The monitor will light.

2 Select movie mode.
Rotate the photo/movie selector to 1. Note that the built-in flash and optional flash units cannot be used when the camera is in movie mode.
3 Select b mode. Rotate the mode dial to b.

Mode dial

22 Basic Photography and Playback

4 Start recording.
Press the movie-record button to start recording. While recording is in progress, the camera will display a recording indicator and the time remaining. The camera can be refocused at any time during recording by tapping your subject in the display. Sound is recorded via the built-in microphone; do not cover the microphone during recording.

Movie-record button Recording indicator

5 End recording.
Press the movie-record button again to end recording. The memory card access lamp will light while the camera finishes saving the movie to the memory card. Do not eject the memory card or remove the battery until the lamp has gone out and recording is complete.

Time remaining
Memory card access lamp

D The 0 Icon
A 0 icon indicates that movies cannot be recorded.
Basic Photography and Playback 23

Basic Playback

Photographs and movies can be viewed on the camera.
1 Press the K button.
A picture will appear in the display.

2 View additional pictures.
Press 4 or 2 to view additional pictures. When pictures are displayed in the monitor, you can view other pictures by flicking a finger left or right over the display. To end playback and return to shooting mode, press the shutterrelease button halfway.

Viewing Movies

Movies are indicated by a 1 icon. Tap the on-screen guide or press J to start playback; your current position is shown on the

movie progress bar.

1 icon Length

Current position/total length

Guide
24 Basic Photography and Playback

Movie Volume progress
bar

Guide

The following operations can be performed:

Operation

Description

Pause

Press 3 to pause playback.

Play

Press J to resume playback when playback is paused or during rewind/advance.

Press 4 to rewind, 2 to advance. Speed increases with each press, from 2× to 4× to 8× to 16×; keep the

control pressed to skip to the beginning or end of the

Rewind/advance

movie (the first frame is indicated by a h in the top right corner of the display, the last frame by a i). If

playback is paused, the movie rewinds or advances

one frame at a time; keep the control pressed for

continuous rewind or advance.

Start slow-motion Press 3 while the movie is paused to start slow-

playback motion playback.

Skip 10 s

Rotate the main command dial one stop to skip ahead or back 10 s.

Skip to last or first Rotate the sub-command dial to skip to the last or first

frame

frame.

Adjust volume Tap X to increase volume, W to decrease.

Trim movie

To view movie editing options, pause playback and press the i button.

Exit

Press 1 or K to exit to full-frame playback.

Return to shooting Press the shutter-release button halfway to end

mode

playback.

Basic Photography and Playback 25

Deleting Unwanted Pictures
Press the O button to delete the current picture. Note that pictures cannot be recovered once deleted.
1 Display a picture you wish to delete.
Display a photo or movie you wish to delete as described in “Basic Playback” (0 24).
2 Delete the picture. Press the O button. A confirmation dialog will be displayed; press the O button again to delete the picture and return to playback. To exit without deleting the picture, press K.
A Delete
To delete selected pictures, all pictures taken on selected dates, or all pictures in a chosen location on the memory card, use the Delete option in the playback menu.
26 Basic Photography and Playback

Technical Notes
Caring for the Camera and Battery: Cautions
Do not drop: The product may malfunction if subjected to strong shocks or vibration.
Keep dry: This product is not waterproof, and may malfunction if immersed in water or exposed to high levels of humidity. Rusting of the internal mechanism can cause irreparable damage.
Avoid sudden changes in temperature: Sudden changes in temperature, such as those that occur when entering or leaving a heated building on a cold day, can cause condensation inside the device. To prevent condensation, place the device in a carrying case or plastic bag before exposing it to sudden changes in temperature.
Keep away from strong magnetic fields: Do not use or store this device in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields. Static charges or the magnetic fields produced by equipment such as radio transmitters could interfere with the display, damage data stored on the memory card, or affect the product’s internal circuitry.
Do not leave the lens pointed at the sun: Do not leave the lens pointed at the sun or other strong light source for an extended period. Intense light may cause the image sensor to deteriorate or produce a white blur effect in photographs.
Lasers and other bright light sources: Do not direct lasers or other extremely bright light sources toward the lens, as this could damage the camera’s image sensor.
Turn the product off before removing the battery: Do not remove the battery while the product is on or while images are being recorded or deleted. Forcibly cutting power in these circumstances could result in loss of data or in damage to product memory or internal circuitry.
Technical Notes 27

Cleaning: When cleaning the camera body, use a blower to gently remove dust and lint, then wipe gently with a soft, dry cloth. After using the camera at the beach or seaside, wipe off any sand or salt using a cloth lightly dampened in pure water and then dry the camera thoroughly.

Lenses, viewfinders, and other glass elements are easily damaged. Dust and lint should be gently removed with a blower. When using an aerosol blower, keep the can vertical to prevent discharge of liquid. To remove fingerprints and other stains from glass surfaces, apply a small amount of lens cleaner to a soft cloth and wipe the glass carefully.

Do not touch the image sensor: Under no circumstances should you exert pressure on the image sensor, poke it with cleaning tools, or subject it to powerful air currents from a blower. These actions could scratch or otherwise damage the sensor.
Lens contacts: Keep the lens contacts clean and be careful not to touch them with your fingers or with tools or other objects.

Image sensor

Storage: To prevent mold or mildew, store the camera in a dry, wellventilated area. If the product will not be used for an extended period, remove the battery to prevent leakage and store the camera in a plastic bag containing a desiccant. Do not, however, store the camera case in a plastic bag, as this may cause the material to deteriorate. Note that desiccant gradually loses its capacity to absorb moisture and should be replaced at regular intervals.

To prevent mold or mildew, take the camera out of storage at least once a month. Turn the camera on and release the shutter a few times before putting it away.

Store the battery in a cool, dry place. Replace the terminal cover before putting the battery away.

Technical Notes

Notes on the monitor and viewfinder: These displays are constructed with extremely high precision; at least 99.99% of pixels are effective, with no more than 0.01% being missing or defective. Hence while these displays may contain pixels that are always lit (white, red, blue, or green) or always off (black), this is not a malfunction and has no effect on images recorded with the device.
Images in the monitor may be difficult to see in a bright light. Do not apply pressure to the monitor, as this could cause damage or malfunction. Dust or lint can be removed with a blower. Stains can be removed by wiping lightly with a soft cloth or chamois leather. Should the monitor break, care should be taken to avoid injury from broken glass and to prevent liquid crystal from the monitor touching the skin or entering the eyes and mouth.
Should you feel unwell or experience any of the following symptoms while framing shots in the viewfinder, discontinue use until your condition improves: nausea, eye pain, eye fatigue, dizziness, headache, stiffness in your neck or shoulders, carsickness, or loss of hand-eye coordination. The same applies should you start to feel unwell when watching the shooting display flicker rapidly on and off during burst photography.
Noise in the form of lines may in rare cases appear in pictures that include bright lights or back-lit subjects.
The battery and charger: Batteries may leak or explode if improperly handled. Observe the following precautions when handling batteries and chargers: · Use only batteries approved for use in this equipment. · Do not expose the battery to flame or excessive heat. · Keep the battery terminals clean. · Turn the product off before replacing the battery. · The battery may become hot while in use. Observe caution when
handling the battery immediately after use.
Technical Notes 29

· Remove the battery from the camera or charger when not in use and replace the terminal cover. These devices draw minute amounts of charge even when off and could draw the battery down to the point that it will no longer function. If the battery will not be used for some time, insert it in the camera and run it flat before removing it from the camera for storage. The battery should be stored in a cool location with an ambient temperature of 15 °C to 25 °C (59 °F to 77 °F; avoid hot or extremely cold locations). Repeat this process at least once every six months.
· Turning the camera on or off repeatedly when the battery is fully discharged will shorten battery life. Batteries that have been fully discharged must be charged before use.
· The internal temperature of the battery may rise while the battery is in use. Attempting to charge the battery while the internal temperature is elevated will impair battery performance, and the battery may not charge or charge only partially. Wait for the battery to cool before charging.
· Charge the battery indoors at ambient temperatures of 5 °C to 35 °C (41 °F to 95 °F). Do not use the battery at ambient temperatures below 0 °C (32 °F) or above 40 °C (104 °F); failure to observe this precaution could damage the battery or impair its performance. Capacity may be reduced and charging times increase at battery temperatures from 0 °C (32 °F) to 15 °C (59 °F) and from 45 °C (113 °F) to 60 °C (140 °F). The battery will not charge if its temperature is below 0 °C (32 °F) or above 60 °C (140 °F).
· If the charge lamp flashes quickly (about eight times a second) during charging, confirm that the temperature is in the correct range and then unplug the charger and remove and reinsert the battery. If the problem persists, cease use immediately and take battery and charger to your retailer or a Nikon-authorized service representative.
· Do not move the charger or touch the battery during charging. Failure to observe this precaution could in very rare instances result in the charger showing that charging is complete when the battery is only partially charged. Remove and reinsert the battery to begin charging again.
30 Technical Notes

· Battery capacity may temporarily drop if the battery is charged at low temperatures or used at a temperature below the temperature at which it was charged.
· Continuing to charge the battery after it is fully charged can impair battery performance.
· A marked drop in the time a fully charged battery retains its charge when used at room temperature indicates that it requires replacement. Purchase a new battery.
· Use the charger with compatible batteries only. Unplug when not in use.
· Do not short the charger terminals. Failure to observe this precaution could result in overheating and damage to the charger.
· Charge the battery before use. When taking photographs on important occasions, ready a spare battery and keep it fully charged. Depending on your location, it may be difficult to purchase replacement batteries on short notice. Note that on cold days, the capacity of batteries tends to decrease. Be sure the battery is fully charged before taking photographs outside in cold weather. Keep a spare battery in a warm place and exchange the two as necessary. Once warmed, a cold battery may recover some of its charge.
· Recycle rechargeable batteries in accord with local regulations, being sure to first insulate the terminals with tape.
· Do not use chargers with damage that leaves the interior exposed or that produce unusual sounds when used.
The charging AC adapter: Observe the precautions below when using the charging AC adapter. · Do not move the camera during charging. Failure to observe this
precaution could in very rare instances result in the camera showing that charging is complete when the battery is only partially charged. Disconnect and reconnect the adapter to begin charging again. · Do not short the adapter terminals. Failure to observe this precaution could result in overheating and damage to the adapter. · Unplug the adapter when it is not in use. · Do not use adapters with damage that leaves the interior exposed or that produce unusual sounds when used.
Technical Notes 31

Specifications

Nikon Z 50 Digital Camera

Type Type
Lens mount

Digital camera with support for interchangeable lenses Nikon Z mount

Lens Compatible lenses

· Z mount NIKKOR lenses · F mount NIKKOR lenses with mount adapter;
restrictions may apply

Effective pixels Effective pixels

20.9 million

Image sensor Image sensor Total pixels Dust-Reduction System

23.5 × 15.7 mm CMOS sensor (Nikon DX format) 21.51 million Image Dust Off reference data (requires NX Studio)

Storage Image size (pixels)

· DX (24×16) image area 5568 × 3712 (Large: 20.7 M) 4176 × 2784 (Medium: 11.6 M) 2784 × 1856 (Small: 5.2 M)
· 1 : 1 (16×16) image area 3712 × 3712 (Large: 13.8 M) 2784 × 2784 (Medium: 7.8 M) 1856 × 1856 (Small: 3.4 M)
· 16 : 9 (24×14) image area 5568 × 3128 (Large: 17.4 M) 4176 × 2344 (Medium: 9.8 M) 2784 × 1560 (Small: 4.3 M)
· Photographs taken during movie recording at a frame size of 3840 × 2160: 3840 × 2160
· Photographs taken during movie recording at a frame size of 1920 × 1080: 1920 × 1080

32 Technical Notes

Storage File format
Picture Control System
Media File system Viewfinder Viewfinder
Frame coverage Magnification Eyepoint Diopter adjustment Eye sensor Monitor Monitor

· NEF (RAW): 12 or 14 bit · JPEG: JPEG-Baseline compliant with fine
(approx. 1 : 4), normal (approx. 1 : 8), or basic (approx. 1 : 16) compression · NEF (RAW)+JPEG: Single photograph recorded in both NEF (RAW) and JPEG formats Auto, Standard, Neutral, Vivid, Monochrome, Portrait, Landscape, Flat, Creative Picture Controls (Dream, Morning, Pop, Sunday, Somber, Dramatic, Silence, Bleached, Melancholic, Pure, Denim, Toy, Sepia, Blue, Red, Pink, Charcoal, Graphite, Binary, Carbon); selected Picture Control can be modified; storage for custom Picture Controls SD (Secure Digital) and UHS-I compliant SDHC and SDXC memory cards DCF 2.0, Exif 2.31, PictBridge
0.99-cm/0.39-in. approx. 2360k-dot (XGA) OLED electronic viewfinder with color balance and auto and 7-level manual brightness controls Approx. 100% horizontal and 100% vertical Approx. 1.02× (50 mm lens at infinity, -1.0 m -1) 19.5 mm (-1.0 m -1; from center surface of viewfinder eyepiece lens) -3 ­ +3 m -1 Automatically switches between monitor and viewfinder displays
8-cm/3.2-in., approx. 1040k-dot tilting TFT touch-sensitive LCD with 170° viewing angle, approximately 100% frame coverage, and 11level manual brightness controls

Technical Notes 33

Shutter Type
Speed Flash sync speed

Electronically-controlled vertical-travel focalplane mechanical shutter; electronic frontcurtain shutter; electronic shutter 1/4000 ­ 30 s (choose from step sizes of 1/3 and 1/2 EV), bulb, time X=1/200 s; synchronizes with shutter at 1/200 s or slower; Auto FP High-Speed sync supported

Release Release mode
Approximate maximum frame advance rate (measured under Nikonspecified test conditions) Self-timer

Single frame, low-speed continuous, highspeed continuous, high-speed continuous (extended), self-timer · Low-speed continuous: 1­4 fps · High-speed continuous: 5 fps · High-speed continuous (extended): 11 fps
2 s, 5 s, 10 s, 20 s; 1­9 exposures at intervals of 0.5, 1, 2, or 3 s

Exposure

Metering system

TTL metering using camera image sensor

Metering mode

· Matrix metering

· Center-weighted metering: Weight of 75% given

to 8 mm circle in center of frame; weighting

can instead be based on average of entire

frame

· Spot metering: Meters 3.5 mm circle (about 2.5%

of frame) centered on selected focus point

· Highlight-weighted metering

Range (ISO 100, f/2.0 lens, ­4 ­ +17 EV

20 °C/68 °F)

34 Technical Notes

Exposure

Mode

· b: Auto, P: programmed auto with flexible

program, S: shutter-priority auto, A: aperture-

priority auto, M: manual · Scene modes: k portrait; l landscape; p child;

m sports; n close up; o night portrait; r night

landscape; s party/indoor; t beach/snow;

d sunset; e dusk/dawn; f pet portrait;

g candlelight; j blossom; z autumn colors;

0 food

· Special effect modes: 4 night vision; V super

vivid; T pop; U photo illustration; 5 toy

camera effect; 6 miniature effect; 7 selective

color; 1 silhouette; 2 high key; 3 low key

· U1 and U2: user settings

Exposure compensation ­5 ­ +5 EV (choose from step sizes of 1/3 and 1/2 EV) available in P, S, A, M, h, and q modes

Exposure lock

Luminosity locked at detected value

ISO sensitivity

ISO 100 ­ 51200 (choose from step sizes of 1/3

(Recommended Exposure and 1/2 EV); can also be set to approx. 1 or 2 EV

Index)

(ISO 204800 equivalent) above ISO 51200; auto

ISO sensitivity control available

Active D-Lighting

Can be selected from Auto, Extra high, High,

Normal, Low, or Off

Multiple exposure

Add, average, lighten, darken

Other options

HDR (high dynamic range), photo mode flicker

reduction

Focus

Autofocus

Hybrid phase-detection/contrast AF with AF

assist

Detection range (single- -4 ­ +19 EV

servo AF, photo mode, ISO · Without low-light AF: -2 ­ +19 EV

100, f/2.0 lens, 20 °C/68 °F)

Technical Notes 35

Focus

Lens servo

· Autofocus (AF): Single-servo AF (AF-S);

continuous-servo AF (AF-C); AF mode auto-

switch (AF-A; available only in photo mode);

full-time AF (AF-F; available only in movie

mode); predictive focus tracking

· Manual focus (M): Electronic rangefinder can be

used

Focus points (single-point 209

AF, photo mode, DX image

area)

AF-area mode

Pinpoint, single-point, and dynamic-area AF

(pinpoint and dynamic-area AF available in

photo mode only); wide-area AF (S); wide-area

AF (L); auto-area AF

Focus lock

Focus can be locked by pressing shutter-release

button halfway (single-servo AF) or by pressing

A (L) button

Flash Built-in flash
Charging time Flash control
Flash mode
Flash compensation

Manual pop-up flash raised via flash pop-up control Guide Number: Approx. 7/22, 7/22 with manual flash (m/ft, ISO 100, 20 °C/68 °F) Approx. 3 s TTL: i-TTL flash control; i-TTL balanced fill-flash is used with matrix, center- weighted, and highlight-weighted metering, standard i-TTL fill-flash with spot metering Fill flash, red-eye reduction, slow sync, slow sync + red-eye, rear- curtain sync, auto, auto + red-eye reduction, auto slow sync, auto slow sync + red-eye, flash off ­3 ­ +1 EV (choose from step sizes of 1/3 and 1/2 EV) available in P, S, A, M, and h modes

36 Technical Notes

Flash Flash-ready indicator
Accessory shoe
Nikon Creative Lighting System (CLS)
White balance White balance
Bracketing Bracketing types Movie Metering system Metering mode Frame size (pixels) and frame rate

Lights when built-in flash or optional flash unit is fully charged; flashes as underexposure warning after flash is fired at full output ISO 518 hot-shoe with sync and data contacts and safety lock i-TTL flash control, optical Advanced Wireless Lighting, FV lock, Color Information Communication, Auto FP High-Speed Sync
Auto (3 types), natural light auto, direct sunlight, cloudy, shade, incandescent, fluorescent (7 types), flash, choose color temperature (2500 K­10,000 K), preset manual (up to 6 values can be stored), all except choose color temperature with fine-tuning
Exposure, white balance, and ADL
TTL metering using camera image sensor Matrix, center-weighted, or highlight- weighted · 3840 × 2160 (4K UHD); 30p (progressive), 25p,
24p · 1920 × 1080; 120p, 100p, 60p, 50p, 30p, 25p,
24p · 1920×1080 (slow-motion); 30p ×4, 25p ×4,
24p ×5 Actual frame rates for 120p, 100p, 60p, 50p, 30p, 25p, and 24p are 119.88, 100, 59.94, 50, 29.97, 25, and 23.976 fps respectively; quality selection available except at sizes of 3840 × 2160, 1920 × 1080 120p/100p, and 1920 × 1080 slow-motion, in which case quality is fixed at m (high)

Technical Notes 37

Movie

File format

MOV, MP4

Video compression

H.264/MPEG-4 Advanced Video Coding

Audio recording format Linear PCM, AAC

Audio recording device Built-in stereo or external microphone with

attenuator option; sensitivity adjustable

Exposure compensation ­3 ­ +3 EV (choose from step sizes of 1/3 and 1/2 EV) available in P, S, A, M, h, and q modes

ISO sensitivity

· M: Manual selection (ISO 100 to 25600; choose

(Recommended Exposure from step sizes of 1/3 and 1/2 EV); auto ISO

Index)

sensitivity control (ISO 100 to 25600) available

with selectable upper limit

· P, S, A: Auto ISO sensitivity control (ISO 100 to

25600. with selectable upper limit

· b, h, q (excluding 4): Auto ISO sensitivity

control (ISO 100 to 25600)

· 4: Auto ISO sensitivity control (ISO 100 to Hi 4)

Active D-Lighting

Can be selected from Same as photo settings,

Extra high, High, Normal, Low, or Off

Other options

Time-lapse movies, electronic vibration

reduction

Playback Playback

Full-frame and thumbnail (4, 9, or 72 images) playback with playback zoom, playback zoom cropping, movie playback, photo and/or movie slide shows, histogram display, highlights, photo information, location data display, auto image rotation, and picture rating

Interface USB
HDMI output Audio input

Hi-Speed USB with Micro-B connector; connection to built-in USB port is recommended Type D HDMI connector Stereo mini-pin jack (3.5 mm diameter; plug- in power supported)

38 Technical Notes

Wi-Fi/Bluetooth Wi-Fi
Bluetooth Range (line of sight)

· Standards: – IEEE 802.11b/g/n (Africa, Asia, Oceania, and the following European countries: Albania, Armenia, Georgia, Kyrgyzstan, Moldova, and Tajikistan) – IEEE 802.11b/g/n/a/ac (other European countries, Uzbekistan, U.S.A., Canada, Mexico) – IEEE 802.11b/g/n/a (other countries in the Americas)
· Operating frequency: – 2412­2462 MHz (channel 11) (Africa, Asia, Oceania, and the following European countries: Albania, Armenia, Georgia, Kyrgyzstan, Moldova, and Tajikistan) – 2412­2462 MHz (channel 11) and 5180­ 5320 MHz (other European countries, Uzbekistan) – 2412­2462 MHz (channel 11) and 5180­ 5825 MHz (U.S.A., Canada, Mexico) – 2412­2462 MHz (channel 11) and 5180­ 5805 MHz (other countries in the Americas)
· Maximum output power (EIRP): 2.4 GHz band: 6.9 dBm 5 GHz band: 10.2 dBm
· Authentication: Open system, WPA2-PSK
· Communication protocols: Bluetooth Specification Version 4.2
· Operating frequency: Bluetooth: 2402­2480 MHz Bluetooth Low Energy: 2402­2480 MHz
· Maximum output power (EIRP): Bluetooth: 1.4 dBm Bluetooth Low Energy: ­0.1 dBm
Approximately 10 m (32 ft) without interference; range may vary with signal strength and presence or absence of obstacles

Technical Notes 39

Power source Battery Charging AC adapter

One EN-EL25 rechargeable Li-ion battery EH-73P charging AC adapter

Tripod socket Tripod socket

1/4 in. (ISO 1222)

Dimensions/weight Dimensions (W × H × D) Weight

Approx. 126.5 × 93.5 × 60 mm (5 × 3.7 × 2.4 in.) Approx. 450 g (15.9 oz.) with battery and memory card but without body cap; approx. 395 g/14 oz. (camera body only)

Operating environment Temperature Humidity

0 °C­40 °C (+32 °F­104 °F) 85% or less (no condensation)

· Unless otherwise stated, all measurements are performed in conformity with Camera and Imaging Products Association (CIPA) standards or guidelines.
· All figures are for a camera with a fully-charged battery. · The sample images displayed on the camera and the images and illustrations in the manuals
are for expository purposes only. · Nikon reserves the right to change the appearance and specifications of the hardware and
software described in this manual at any time and without prior notice. Nikon will not be held liable for damages that may result from any mistakes that this manual may contain.

40 Technical Notes

MH-32 Battery Charger

Rated input Rated output Supported batteries Charging time
Operating temperature Dimensions (W × H × D)
Weight

AC 100­240 V, 50/60 Hz, 0.21 A DC 8.4 V/1.12 A (MAX) Nikon EN-EL25 rechargeable Li-ion batteries Approx. 2 hours and 30 minutes at an ambient temperature of 25 °C (77 °F) when no charge remains 0 °C­40 °C (+32 °F­104 °F) Approx. 67 × 94 × 28 mm (2.7 × 3.8 × 1.2 in.), excluding plug adapter Approx. 99 g (3.5 oz), excluding plug adapter

The symbols on this product represent the following: m AC, p DC, q Class II equipment (The construction of the product is double-insulated.)

EN-EL25 Rechargeable Li-ion Battery

Type Rated capacity Operating temperature Dimensions (W × H × D) Weight

Rechargeable lithium-ion battery 7.6 V/1120 mAh 0 °C­40 °C (+32 °F­104 °F) Approx. 34 × 50.5 × 18 mm (1.4 × 2.0 × 0.8 in.) Approx. 53 g (1.9 oz), excluding terminal cover

Nikon reserves the right to change the appearance and specifications of the hardware and software described in this manual at any time and without prior notice. Nikon will not be held liable for damages that may result from any mistakes that this manual may contain.

Technical Notes 41

A Disposing of Data Storage Devices
Please note that deleting images or formatting memory cards or other data storage devices does not completely erase the original image data. Deleted files can sometimes be recovered from discarded storage devices using commercially available software, potentially resulting in the malicious use of personal image data. Ensuring the privacy of such data is the user’s responsibility.
Before discarding a data storage device or transferring ownership to another person, erase all data using commercial deletion software, or format the device and then completely refill it with images containing no private information (for example, pictures of empty sky). Care should be taken to avoid injury when physically destroying data storage devices.
Before discarding the camera or transferring ownership to another person, you should also use the Reset all settings option in the camera setup menu to delete network settings and other personal information.
A Supported Standards
· DCF Version 2.0: The Design Rule for Camera File System (DCF) is a standard widely used in the digital camera industry to ensure compatibility among different makes of camera.
· Exif version 2.31: The camera supports Exif (Exchangeable Image File Format for Digital Still Cameras) version 2.31, a standard in which information stored with photographs is used for optimal color reproduction when the images are output on Exif-compliant printers.
· PictBridge: A standard developed through cooperation with the digital camera and printer industries, allowing photographs to be output directly to a printer without first transferring them to a computer.
· HDMI: High-Definition Multimedia Interface is a standard for multimedia interfaces used in consumer electronics and AV devices capable of transmitting audiovisual data and control signals to HDMIcompliant devices via a single cable connection.
42 Technical Notes

Approved Memory Cards
The camera supports SD, SDHC, and SDXC memory cards, including SDHC and SDXC cards compliant with UHS-I. Cards rated UHS Speed Class 3 or better are recommended for movie recording and playback; using slower cards may result in recording or playback being interrupted. When choosing cards for use in card readers, be sure they are compatible with the device. Contact the manufacturer for information on features, operation, and limitations on use.
Technical Notes 43

Battery Endurance
The approximate length of footage or number of shots that can be recorded with a fully-charged EN-EL25 battery varies with the monitor mode. 1 The figures for photographs 2 are as follows: · Viewfinder only: 280 shots · Monitor only: 320 shots
The figures for movies 3 are: · Viewfinder only: 75 minutes · Monitor only: 75 minutes
Actions such as the following can reduce battery endurance: · Keeping the shutter-release button pressed halfway · Repeated autofocus operations · Taking NEF (RAW) photographs · Slow shutter speeds · Using camera Wi-Fi (wireless LAN) and Bluetooth features · Using the camera with optional accessories connected · Repeatedly zooming in and out · Taking pictures at low ambient temperatures
To ensure that you get the most from rechargeable Nikon EN-EL25 batteries: · Keep the battery contacts clean. Soiled contacts can reduce battery
performance. · Use batteries immediately after charging. Batteries will lose their
charge if left unused.
1 Endurance varies with the condition of the battery, the temperature, the interval between shots, and the length of time menus are displayed.
2 CIPA standard. Measured at 23 °C/73.4 °F (±2 °C/3.6 °F) with a NIKKOR Z DX 16­50mm f/3.5­ 6.3 VR lens under the following test conditions: one photograph taken at default settings once every 30 s.
3 Measured at 23 °C/73.4 °F (±2 °C/3.6 °F) with the camera at default settings and a NIKKOR Z DX 16­50mm f/3.5­6.3 VR lens under conditions specified by the Camera and Imaging Products Association (CIPA). Individual movies can be up to 29 minutes 59 seconds in length; recording may end before these limits are reached if the camera temperature rises.
44 Technical Notes

NIKKOR Z DX 16­50mm f/3.5­6.3 VR Lens
Note that lens kits may not be available in some countries or regions.

Using the Lens

Parts of the Lens: Names and Functions

1

23 4 567

8

9

Note: The rear cap included with the lens that comes with the lens kit may differ from that shown, in which case it can be removed without performing Step q.
Technical Notes 45

1 Lens hood* 2 Zoom ring 3 Focal length scale 4 Focal length mark 5 Control ring

6 Lens mounting mark 7 CPU contacts 8 Front lens cap 9 Rear lens cap * Available separately.

Specifications

Mount Focal length Maximum aperture Lens construction
Angle of view Focal length scale Focusing system Vibration reduction Minimum focus distance (measured from focal plane)
Maximum reproduction ratio Diaphragm blades Aperture range
Filter-attachment size Dimensions
Weight

Nikon Z mount 16 ­ 50 mm f/3.5 ­ 6.3 9 elements in 7 groups (including 1 ED element and 4 aspherical elements) 83°­31° 30′ (DX image area) Graduated in millimeters (16, 24, 35, 50) Internal focusing system Lens shift using voice coil motors (VCMs) · 16 mm zoom position: 0.25 m (0.82 ft) · 24 mm zoom position: 0.2 m (0.66 ft) · 35 mm zoom position: 0.23 m (0.76 ft) · 50 mm zoom position: 0.3 m (0.99 ft) 0.2×
7 (rounded diaphragm opening) · 16 mm zoom position: f/3.5 ­ 22 · 50 mm zoom position: f/6.3 ­ 40 46 mm (P = 0.75 mm) Approx. 70 mm/2.8 in. maximum diameter × 32 mm/1.3 in. (distance from camera lens mount flange when lens is retracted) Approx. 135 g (4.8 oz)

Nikon reserves the right to change the appearance, specifications, and performance of this product at any time and without prior notice.

46 Technical Notes

NIKKOR Z DX 50­250mm f/4.5­6.3 VR Lens
Note that lens kits may not be available in some countries or regions.

Using the Lens

Parts of the Lens: Names and Functions

12

4 5 6 7 8 9 10

3

11

12

Note: The rear cap included with the lens that comes with the lens kit may differ from that shown, in which case it can be removed without performing Step q.
Technical Notes 47

1 Lens hood* 2 Lens hood lock mark 3 Lens hood alignment mark 4 Lens hood mounting mark 5 Zoom ring 6 Focal length scale

7 Focal length mark 8 Control ring 9 Lens mounting mark 10 CPU contacts 11 Front lens cap 12 Rear lens cap * Available separately.

48 Technical Notes

Specifications

Mount Focal length Maximum aperture Lens construction
Angle of view Focal length scale
Focusing system Vibration reduction Minimum focus distance (measured from focal plane)
Maximum reproduction ratio Diaphragm blades Aperture range
Filter-attachment size Dimensions
Weight

Nikon Z mount 50 ­ 250 mm f/4.5 ­ 6.3 16 elements in 12 groups (including 1 ED element) 31° 30’­6° 30′ (DX image area) Graduated in millimeters (50, 70, 100, 135, 200, 250) Internal focusing system Lens shift using voice coil motors (VCMs) · 50 mm zoom position: 0.5 m (1.64 ft) · 70 mm zoom position: 0.52 m (1.71 ft) · 100 mm zoom position: 0.58 m (1.91 ft) · 135 mm zoom position: 0.65 m (2.14 ft) · 200 mm zoom position: 0.83 m (2.73 ft) · 250 mm zoom position: 1.0 m (3.29 ft) 0.23×
7 (rounded diaphragm opening) · 50 mm zoom position: f/4.5 ­ 22 · 250 mm zoom position: f/6.3 ­ 32 62 mm (P = 0.75 mm) Approx. 74 mm/3 in. maximum diameter × 110 mm/4.4 in. (distance from camera lens mount flange when lens is retracted) Approx. 405 g (14.3 oz)

Nikon reserves the right to change the appearance, specifications, and performance of this product at any time and without prior notice.

Technical Notes 49

Notices

Notices for Customers in the U.S.A.

The Battery Charger

IMPORTANT SAFETY INSTRUCTIONS–SAVE THESE INSTRUCTIONS DANGER–TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS
For connection to a supply not in the U.S.A., use an attachment plug adapter of the proper configuration for the power outlet if needed. This power unit is intended to be correctly oriented in a vertical or floor mount position.

Federal Communications Commission (FCC) Radio Frequency Interference Statement

This equipment has been tested and

found to comply with the limits for a

Class B digital device, pursuant to Part 15

of the FCC rules. These limits are

designed to provide reasonable protection against harmful interference CAUTIONS

in a residential installation. This

Modifications

equipment generates, uses, and can The FCC requires the user to be

radiate radio frequency energy and, if notified that any changes or

not installed and used in accordance modifications made to this device that

with the instructions, may cause harmful are not expressly approved by Nikon

interference to radio communications. Corporation may void the user’s

However, there is no guarantee that authority to operate the equipment.

interference will not occur in a particular Interface Cables

installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try

Use the interface cables sold or provided by Nikon for your equipment. Using other interface cables may exceed the limits of Class B Part 15 of the FCC rules.

to correct the interference by one or Nikon Inc., 1300 Walt Whitman Road,

more of the following measures:

Melville, New York 11747-3064, U.S.A.

· Reorient or relocate the receiving Tel.: 631-547-4200

antenna.

· Increase the separation between the

equipment and receiver.

· Connect the equipment into an

outlet on a circuit different from that

to which the receiver is connected.

· Consult the dealer or an experienced

radio/television technician for help.

50 Technical Notes

Notice for Customers in Canada CAN ICES-3 B / NMB-3 B
Notices for Customers in Europe

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

This symbol indicates

This symbol on the

that electrical and

battery indicates that the

electronic equipment is

battery is to be collected

to be collected

separately.

separately.

The following apply only

The following apply only

to users in European

to users in European countries:

countries:

· This product is designated for

· All batteries, whether marked with

separate collection at an

this symbol or not, are designated

appropriate collection point. Do not for separate collection at an

dispose of as household waste.

appropriate collection point. Do not

· Separate collection and recycling dispose of as household waste.

helps conserve natural resources · For more information, contact the

and prevent negative consequences retailer or the local authorities in

for human health and the

charge of waste management.

environment that might result from

incorrect disposal.

· For more information, contact the

retailer or the local authorities in

charge of waste management.

Bluetooth and Wi-Fi (Wireless LAN)
This product is controlled by the United States Export Administration Regulations (EAR). The permission of the United States government is not required for export to countries other than the following, which as of this writing are subject to embargo or special controls: Cuba, Iran, North Korea, Sudan, and Syria (list subject to change).
The use of wireless devices may be prohibited in some countries or regions. Contact a Nikon-authorized service representative before using the wireless features of this product outside the country of purchase.
The Bluetooth transmitter in this device operates in the 2.4 GHz band.
Technical Notes 51

Notice for Customers in the U.S.A. and Canada This device complies with part 15 of FCC Rules and Innovation, Science and Economic Development Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC WARNING The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Nikon Corporation may void the user’s authority to operate the equipment.
Compliance with FCC requirement 15.407(c) Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure.
Frequency Tolerance: ±20 ppm
FCC Radio Frequency Interference Statement Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: · Reorient or relocate the receiving antenna. · Increase the separation between the equipment and receiver. · Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected. · Consult the dealer or an experienced radio/TV technician for help.
52 Technical Notes

Co-location This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A. Tel.: 631-547-4200
FCC/ISED RF Exposure Statement The available scientific evidence does not show that any health problems are associated with using low power wireless devices. There is no proof, however, that these low power wireless devices are absolutely safe. Low power Wireless devices emit low levels of radio frequency energy (RF) in the microwave range while being used. Whereas high levels of RF can produce health effects (by heating tissue), exposure of low-level RF that does not produce heating effects causes no known adverse health effects. Many studies of low-level RF exposures have not found any biological effects. Some studies have suggested that some biological effects might occur, but such findings have not been confirmed by additional research. This product has been tested and found to comply with FCC/ISED radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines and RSS-102 of the ISED radio frequency (RF) Exposure rules. Please refer to the SAR test report that was uploaded to FCC website.
Compliance with RSS-247 Issue 2 §6.4 Data transmission is always initiated by software, which is the passed down through the MAC, through the digital and analog baseband, and finally to the RF chip. Several special packets are initiated by the MAC. These are the only ways the digital baseband portion will turn on the RF transmitter, which it then turns off at the end of the packet. Therefore, the transmitter will be on only while one of the aforementioned packets is being transmitted. In other words, this device automatically discontinue transmission in case of either absence of information to transmit or operational failure.
Notice for Customers in Canada For indoor use only (5150-5350MHz).
Notice for Customers in Europe and in Countries Complying with the Radio Equipment Directive Hereby, Nikon Corporation declares that the radio equipment type Z 50 is in compliance with Directive 2014/53/EU.
The full texts of the EU declarations of conformity are available at the following internet addresses: https://imaging.nikon.com/support/pdf/DoC_N1912.pdf
For this radio equipment, 5150­5350 MHz band is restricted to indoor operations only. This restriction on putting into service or of the requirement for authorization of use applies in AT, BE, BG, CY, CZ, DK, EE, FI, FR, DE, EL, MK, IE, IT, LV, LT, LU, MT, NL, PL, PT, RO, SK, LI, HU, SI, ES, SE, UK (NI), IS, ME, NO, CH, TR, HR and RS.
Technical Notes 53

Notice for Customers in the UK

Hereby, Nikon Corporation declares that the radio equipment type Z 50 is in compliance with Radio Equipment Regulations 2017.

The full text of the UKCA declaration of conformity is available at the following internet address: https://imaging.nikon.com/support/pdf/UKCA_DoC_N1912.pdf

For this radio equipment, 5150­5350 MHz band is restricted to indoor operations only.

Wi-Fi · Operating frequency:
– 2412­2462 MHz (channel 11) and 5180­5320 MHz
· Maximum output power (EIRP): – 2.4 GHz band: 6.9 dBm – 5 GHz band: 10.2 dBm

Bluetooth · Operating frequency:
– Bluetooth: 2402­2480 MHz – Bluetooth Low Energy:
2402­2480 MHz · Maximum output power (EIRP):
– Bluetooth: 1.4 dBm – Bluetooth Low Energy: ­0.1 dBm

Notice for Customers in Singapore

Trade Name: Model: Z 50

This device complies with radio-frequency regulations. The content of certification labels not affixed to the device is given below.
Complies with IMDA Standards DA103423
Notice for Customers in Nigeria

Connection and use of this communications equipment is permitted by the Nigerian Communications Commission

Security
Although one of the benefits of this product is that it allows others to freely connect for the wireless exchange of data anywhere within its range, the following may occur if security is not enabled: · Data theft: Malicious third-parties may intercept wireless transmissions to
steal user IDs, passwords, and other personal information. · Unauthorized access: Unauthorized users may gain access to the network
and alter data or perform other malicious actions. Note that due to the design of wireless networks, specialized attacks may allow unauthorized access even when security is enabled. · Unsecured networks: Connecting to open networks may result in unauthorized access. Use secure networks only.

54 Technical Notes

A Conformity Marking
The standards with which the camera complies can be viewed using the Conformity marking option in the setup menu.
A Certificates
Technical Notes 55

Trademarks and Licenses

A Trademark Information
IOS is a trademark or registered trademark of Cisco Systems, Inc., in the United States and/or other countries and is used under license. Windows is either a registered trademark or a trademark of Microsoft Corporation in the United States and/or other countries. Mac, macOS, OS X, Apple®, App Store®, the Apple logos, iPhone®, iPad®, and iPod touch® are trademarks of Apple Inc. registered in the U.S. and/or other countries. Android, Google Play and the Google Play logo are trademarks of Google LLC. The Android robot is reproduced or modified from work created and shared by Google and used according to terms described in the Creative Commons 3.0 Attribution License. PictBridge is a trademark of the Camera and Imaging Products Association (CIPA). The SD, SDHC, and SDXC logos are trademarks of the SD-3C, LLC. HDMI, the HDMI logo and High- Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing, LLC.
Wi-Fi and the Wi-Fi logo are trademarks or registered trademarks of the Wi-Fi Alliance. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Nikon Corporation is under license.
All other trade names mentioned in this manual or the other documentation provided with your Nikon product are trademarks or registered trademarks of their respective holders. Use of the Made for Apple badge means that an accessory has been designed to connect specifically to the Apple products identified in the badge, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with an Apple product may affect wireless performance.
56 Technical Notes

A FreeType License (FreeType2)
Portions of this software are copyright © 2012 The FreeType Project (https://www.freetype.org). All rights reserved.
A MIT License (HarfBuzz)
Portions of this software are copyright © 2018 The HarfBuzz Project (https://www.freedesktop.org/wiki/Software/HarfBuzz). All rights reserved.
A AVC Patent Portfolio License
THIS PRODUCT IS LICENSED UNDER THE AVC PATENT PORTFOLIO LICENSE FOR THE PERSONAL AND NON-COMMERCIAL USE OF A CONSUMER TO (i) ENCODE VIDEO IN COMPLIANCE WITH THE AVC STANDARD (“AVC VIDEO”) AND/OR (ii) DECODE AVC VIDEO THAT WAS ENCODED BY A CONSUMER ENGAGED IN A PERSONAL AND NONCOMMERCIAL ACTIVITY AND/OR WAS OBTAINED FROM A VIDEO PROVIDER LICENSED TO PROVIDE AVC VIDEO. NO LICENSE IS GRANTED OR SHALL BE IMPLIED FOR ANY OTHER USE. ADDITIONAL INFORMATION MAY BE OBTAINED FROM MPEG LA, L.L.C. SEE https://www.mpegla.com
Technical Notes 57

A Unicode® Character Database License (Unicode® Character Database)
This software incorporates Unicode® Character Database open-source code. The license for this open-source code is given below.
COPYRIGHT AND PERMISSION NOTICE
Copyright © 1991-2019 Unicode, Inc. All rights reserved. Distributed under the Terms of Use in https://www.unicode.org/copyright.html.
Permission is hereby granted, free of charge, to any person obtaining a copy of the Unicode data files and any associated documentation (the “Data Files”) or Unicode software and any associated documentation (the “Software”) to deal in the Data Files or Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, and/or sell copies of the Data Files or Software, and to permit persons to whom the Data Files or Software are furnished to do so, provided that either (a) this copyright and permission notice appear with all copies of the
Data Files or Software, or (b) this copyright and permission notice appear in associated
Documentation.
THE DATA FILES AND SOFTWARE ARE PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR HOLDERS INCLUDED IN THIS NOTICE BE LIABLE FOR ANY CLAIM, OR ANY SPECIAL INDIRECT OR CONSEQUENTIAL DAMAGES, OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE DATA FILES OR SOFTWARE.
Except as contained in this notice, the name of a copyright holder shall not be used in advertising or otherwise to promote the sale, use or other dealings in these Data Files or Software without prior written authorization of the copyright holder.
58 Technical Notes

Technical Notes 59

60 Technical Notes

Warranty Terms – Nikon Europe Service Warranty
Dear Nikon Customer, We thank you for your purchasing this Nikon product. Should your Nikon product require warranty service, please contact the dealer from whom it was purchased or a member of our authorized service network within the sales territory of Nikon Europe B.V. (e.g. Europe/Russia/others). See details under: https://www.europe-nikon.com/support
In order to avoid any unnecessary inconvenience, we advise you to read the user manuals carefully before contacting the dealer or our authorized service network.
Your Nikon equipment is guaranteed against any manufacturing defects for one full year from the date of original purchase. If during this period of guarantee the product proves defective due to improper material or workmanship, our authorized service network within the sales territory of Nikon Europe B.V. will, without charge for labor and parts, repair the product in the terms and conditions set as below. Nikon reserves the right (at its sole discretion) to replace or repair the product.
1. This warranty is only provided upon presentation of the completed warranty card and original invoice or purchase receipt indicating the date of purchase, product type and dealer’s name, together with the product. Nikon reserves the right to refuse free-of-charge warranty service if the above documents cannot be presented or if the information contained in it is incomplete or illegible.
Technical Notes 61

2. This warranty will not cover: · necessary maintenance and repair or replacement of parts due to normal wear and tear. · modifications to upgrade the product from its normal purpose as described in user manuals, without the prior written consent of Nikon. · transport costs and all risks of transport relating directly or indirectly to the warranty of the products. · any damage resulting from modifications or adjustments which may be made to the product, without the prior written consent of Nikon, in order to comply with local or national technical standards in force in any other country than the ones for which the product was originally designed and/or manufactured.
3. The warranty will not be applicable in the case of: · damage caused by misuse including but not limited to failure to use the product for its normal purpose or according to the user instructions on the proper use and maintenance, and to installation or use of the product inconsistent with the safety standards in force in the country where it is used. · damage caused by accidents including but not limited to lightning, water, fire, misuse or neglect. · defacing, illegibility or removal of the model or serial number on the product. · damage resulting from repairs or adjustments which have been conducted by unauthorized service organizations or persons. · defects in any system into which the product is incorporated or with which it is used.
62 Technical Notes

4. This service warranty does not affect the consumer’s statutory rights under applicable national laws in force, nor the consumer’s right against the dealer arising from their sales/ purchase contract.
Notice: An overview of all authorized Nikon Service Stations can be found online by following this Link (URL = https://www.europe-nikon.com/service/).
Technical Notes 63

SAMPLE Nikon Z 50
No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION.
AMA16997 Printed in Europe
SB3F04(11) 6MOA3611-04

References

• index.html
• Nikon Consumer
• Nikon | Service
• Nikon | Support
• Nikon | Support
• GitHub - harfbuzz/harfbuzz: HarfBuzz text shaping engine
• The FreeType Project
• Nikon Asia - Explore the World of Imaging Technology | Nikon Asia
• Nikon | Shop & Explore Cameras, Lenses, and Accessories
• Unicode Terms of Use

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>