audiority VST2 Electric Matter Flanger Filter Matrix Pedal User Manual
- June 5, 2024
- audiority
Table of Contents
Electric Matter
(VST2, VST3, AU, AAX)
produced by Luca Capozzi (Audiority Srls), April 2022
Current Manual version: v1.1
The Electric Matter is a faithful simulation of the Electro-Harmonix® Deluxe
Electric MistressTM, a late 70’s BBD flanger and filter matrix pedal. This
flanger, featuring a Reticon SAD1024 BBD chip, has been used by countless
artists for either subtle, to make leads dreamy and divine, or more prominent
to emulate Leslie rotors. Compared to the classic version, the Deluxe models
feature a different LFO and VCO circuit, leading to a wider range of settings.
Our Electric Matter goes further by fixing the tone sucking and volume drop
often related to these hardware units.
Please, read carefully both product specifications and system requirements
before purchasing any Audiority product.
*All product names used in this website (www.audiority.com) are trademarks of their respective owners, which are in no way associated or affiliated with Audiority. These trademarks of other manufacturers are used solely to identify the products of those manufacturers whose tones and sounds were studied during Audiority’s sound model development. Electric Mistress, Deluxe Electric Mistress and Electro-Harmonix are registered trademarks of New Sensor Corp.
Electric Matter
produced by Audiority, April 2022.
Credits
Code & DSP: Luca Capozzi (Audiority Srls), April 2022 GUI Design: Luca Capozzi
Published by Audiority Srls
Copyright © 2022 Audiority Srls All rights reserved.
Specifications
- BBD Analog Flanger simulation
- Color, Range and Rate controls
- Filter Matrix mode
- Tempo Sync – Stereo Spread
- Through-Zero Mode
- Pre and Post effect gain
- Mix control
- Resizable interface
System Requirements PC
- Windows 7 64bit or later
- Intel i5 or equivalent
- 2 GB RAM
- Screen resolution: 1024×768
- VST2, VST3, AU 64-bit host
- PT11 or higher, AAX 64-bit host
MAC (Intel)
- OSX 10.8 or later
- Intel i5 or equivalent
- 2 GB RAM
- Screen resolution: 1024×768
- VST2, VST3, AU 64-bit host
- PT11 or higher, AAX 64-bit host
MAC (Silicon)
- macOS 11.0 or later
- M1 or higher
- 2 GB RAM
- Screen resolution: 1024×768
- VST2, VST3, AU 64-bit host
- PT11 or higher, AAX 64-bit host
FILE LOCATIONS
Mac
All presets, license, IR files and settings are located in:
/Users/Shared/Audiority/
AAX and VST plugins will be placed in their own Audiority sub-folder located
in:
AAX: /Library/Application Support/Avid/Audio/Plug-Ins/Audiority
VST: /Library/Audio/Plug-Ins/VST/Audiority
VST3: /Library/Audio/Plug-Ins/VST3/Audiority
PC
All presets, licenses, IR files, and settings are located to C:
UsersPublicPublic DocumentsAudiority
AAX and VST plugins will be placed in their own Audiority sub-folder, usually
located in:
AAX: C:Program FilesAvidAudioPlug-InsAudiority
VST: {Your VST Path}Audiority
VST3: {Your VST3 Path}Audiority
PLUGIN ACTIVATION
Once you install and open the plugin for the first time, it will be in Demo
Mode until a license file is loaded.
In Demo Mode, the plugin will output 3 seconds of silence every minute.
You can activate the plugin either OFFLINE or ONLINE.
OFFLINE ACTIVATION
If you purchased the plugin from our site, you should have received an email
to download the installers and the license file. Save the license file you got
with your purchase email (or via our User Area) anywhere on your computer.
Then, to activate the plugin, click on the Audiority logo and select
“Register”. The Registration window will pop up allowing you to load the
license file you got while purchasing the plugin by clicking the “Load
License” button. Alternatively, you can drag and drop the license file on the
registration window.
NOTE: If you purchased the plugin from one of our dealers, please check
the “USER AREA AND REDEEM CODES” section below.
ONLINE ACTIVATION
If you are registered to our User Area, then you can activate the plugin
online.
Insert your Username (or email address), your password and click the “Login” button. The license file will be automatically delivered in your computer and the plugin will be activated.
USER AREA AND REDEEM CODES
If you purchased from one of our dealers, then you should have received an
email with a redeem code. This code is required to deposit a license in your
User Area account and let you download the license file or activate the plugin
online.
If you don’t have a User Area account yet, please follow these steps:
-
Go to https://www.audiority.com/register and fill out the signup form.
-
Once registered, log in to your account by clicking the User Area section of our site. Click the REDEEM section of your account and paste the code you received via email from our dealer.
-
After submitting the code, a license will be deposited in your account and will be shown in “MY PLUGINS” section of your User Area.
-
Now you can click “License File” and save the license anywhere on your computer and ready to be loaded through the plugin registration window. You can also skip this part and activate your plugin online (see previous section of this manual).
USER PATHS SETTING
By selecting “Settings” from the logo menu, you can change the path for
Presets, License and IR folders.
You can also disable our Newsfeed from here.
Note: Please do not move the Settings folder from its default location.
Plugin Parameters
TOOLBAR
The Toolbar allows you to manage the plugin presets, register the plugin and
set some global parameters.
By clicking the AUDIORITY logo, in the top left corner of the Toolbar, you’ll
be able to visit our website and social profiles, register the plugin, change
the interface size and customize the paths for license and preset files.
The HQ button will enable oversampling, useful to reduce aliasing when the
signal saturates. Use the Randomize and Reset buttons to experiment with
random presets or restore it to its saved version. Press CTRL+DOUBLE CLICK on
any knob to manually assign a new value.
PARAMETERS
COLOR | Adjusts the intensity of the flanger effect |
---|---|
RANGE | Adjusts the lower limit of the flanger sweep |
RATE | Controls the speed of the flange modulation. This is disabled when |
FILTER MATRIX is enabled
FILTER MATRIX| When enabled, the modulation is disconnected from the
circuit, freezing the flanger and creating a
matrix of filters. Use the RANGE knob to change the filter position and COLOR
to set the depth of filtering
GLOBAL CONTROLS (Footer)
TZ| Sets Through-Zero Mode, where the dry signal is time aligned with
the flanged one. It provides a different
flanger color.
---|---
SYNC| Syncs the modulation speed to the host
INPUT / OUTPUT| Pre/Post effect gain
MIX| Dry/wet signal mixer
SPREAD| Widen the stereo image by phase-shifting the right channel LFO.
Won’t have any effect when the plugin is
on a mono track.
RESIZING CONTROLS (Audiority logo menu)
Small / Default / Big Size| Reduce, reset or increase the size of the
plugin interface.
---|---
Resizing Corner| You can resize it from the bottom right corner of the
GUI
RIGHT-CLICK OPTIONS: Each one of the knobs can be locked so it won’t change
its value.
This is very useful when you load the plugin on an AUX/SEND channel. To lock a
knob, simply RIGHT CLICK it and select LOCK PARAMETER.
CHANGELOG
v1.1 (Apr 2022)
- NEW: Stereo Spread parameters
- NEW: Through-Zero Mode
v 1.0 (Apr 2022)
- Original release
Audiority Srls – EULA (End-User License Agreement)
The software that accompanies this license is supplied under a license
agreement. By installing this software you are agreeing to the Audiority
License Agreement. If you do not agree with these terms, do not install the
software. If you haven’t downloaded a license file (or used a redeem code),
you may obtain a refund within 14 days through the dealer where you purchased
the software, or if purchased at any of Audiority online stores, by contacting
support@audiority.com. The terms of this
license agreement are as follows:
By installing the software, you confirm your acceptance of the Audiority Srls
End User License Agreement.
This is a non-exclusive, single-user License.
This End User License Agreement (“Agreement”) is between Audiority Srls and
you.
IMPORTANT – PLEASE READ THIS LICENSE AGREEMENT CAREFULLY BEFORE
INSTALLING THIS SOFTWARE.
By using the Audiority Srls Software you accept these terms. The Audiority Srls Software may be distributed with software or components from third- parties (“Third-Party Software”). Use of Third-Party Software is also subject to the terms of this EULA.
-
Limited Use License.
The Software is licensed, not sold, by Audiority or its Third-Party Software suppliers (“Suppliers”) to the original end-user for use only on the terms set forth in the Agreement. If and only if your Software is purchased through an Audiority Authorized Dealer or Distributor, Audiority, as Licensor, grants you, as an end-user Licensee, a non-exclusive license to use the Software (which includes computer software, updates, and any bug fixes subsequently delivered and associated media, printed materials and “online” or electronic documentation). -
Title.
The Software is owned by Audiority or its Suppliers as applicable and is protected by copyright laws and international treaty provisions, as well as other intellectual property laws and treaties. Audiority (or its Suppliers, as applicable) retains title to and ownership of the Software and all copies, as well as any rights not specifically granted. This Agreement only gives you certain rights to use the Software and related documentation, which may be revoked if you do not follow these terms. -
Limited Rights to Install and Use the Software.
(i) Permitted use and restrictions.
You may install the Software into the memory of no more than three computers for your internal business use or your own personal enjoyment but may not redistribute or electronically transfer the Software to someone else’s computer or operate it in a time-sharing or service bureau operation.
(ii) Reverse engineering and copying limitations.
You may make one copy of the Software for backup purposes only (and replacement backup copies in the event of loss of or damage to a backup copy), provided you include all copyright notices contained on the original media on the backup copy. You may not modify, translate, adapt, reverse engineer, decompile, create other works from, or disassemble the Software or any portions thereof (except and to the extent that applicable law expressly permits reverse engineering, decompilation or disassembly).
(iii) Technical limitations.
The Software may include technological measures that are designed to prevent or detect unlicensed use of the Software. Circumvention of these technological measures is prohibited, except and only to the extent that applicable law expressly permits, despite this limitation. Any attempt to circumvent technical limitations may render the Software or certain features unusable or unstable, and may prevent you from updating or upgrading the Software.
(iv) No reconfiguration.
The Software is licensed for installation and use only in the manner it was provided to you, as configured by an automated installation program provided with the Software, or as described in Audiority’s Documentation. You may not separate the components contained in the Software or otherwise reconfigure the Software to circumvent technical limitations on the use of the Software or to otherwise exceed the scope of your license. -
Export and Renting Restrictions.
You may not export, convey, rent, sublicense, or otherwise distribute the Software or any rights therein to any person or entity. -
License Transfer.
Except if otherwise stated within this EULA, Licensee may resell the software to a third party or transfer the software permanently if the licensee purchased the Software from any Audiority store or from any Audiority Dealer. Audiority reserves all rights to deny any requests for the transfer of this license, and may institute transfer fees and policies as it sees fit at the time of any request for the transfer of this license if the Licensee purchased the license from another Licensee. By transferring a license, the third party agrees in writing with this EULA and Licensee ceases all use of the software, completely removes all installed copies of the software from its computer and – if the software was not purchased via download – deletes or transfers the original data storage to the third party (if Licensee is not obliged to longer storage by law). NFR (not for resale) copies, including freeware products, free bonus products, and giveaway copies, cannot be resold. Following the respective request from Licensee via its email address registered with Audiority, and payment of the Transfer Fee, the license file of the Product will be transferred by Audiority to the third party, and at the same time the registration of Licensee for the software purchased will be deleted. The current and updated Transfer Fee can be found at this address https://www.audiority.com/faq/#1509113035751-cec03c9c-5c77 -
Excluded Products.
Audiority and its Suppliers give NO warranty for Software free of charge, including Software designated as “demo”, “limited release,” “pre-release,” “loan,” “beta” or “test.” This Software is provided “AS IS.” -
Limitation of Liability.
AUDIORITY AND ITS SUPPLIERS SHALL HAVE NO LIABILITY TO YOU WHETHER IN CONTRACT, TORT, NEGLIGENCE OR PRODUCTS LIABILITY, FOR ANY CLAIM, LOSS, OR DAMAGE, INCLUDING BUT NOT LIMITED TO LOST PROFITS, LOSS OF USE, BUSINESS INTERRUPTION, LOST DATA, OR LOST FILES, OR FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND OR NATURE WHATSOEVER ARISING OUT OF OR IN CONNECTION WITH THE USE OF OR INABILITY TO USE THE SOFTWARE OR DOCUMENTATION, OR THE PERFORMANCE OR OPERATION OF THE SOFTWARE, EVEN IF AUTHORITY OR ITS SUPPLIERS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE EXCLUSION OR LIMITATION MAY NOT APPLY TO YOU. IN NO EVENT SHALL THE AUTHORITY’S TOTAL LIABILITY TO YOU FOR ALL DAMAGES, LOSSES, AND CAUSES OF ACTION WHETHER IN CONTRACT, TORT (INCLUDING NEGLIGENCE), OR OTHERWISE EXCEED THE AMOUNT PAID BY YOU FOR THE SOFTWARE. -
Termination.
To the extent permitted by law, and without prejudice to any other rights Audiority may have, Audiority may terminate your license if you materially breach these terms and conditions. -
Third-Party Software and Information.
This EULA governs any Third-Party Software distributed by Audiority. Audiority may include information about third-party products and services, including links to Web sites run by others. Audiority is not responsible for and does not endorse or sponsor, this third-party information. -
Miscellaneous.
This Agreement constitutes the entire agreement between the parties with respect to the use of the Software and Documentation and supersedes all prior or contemporaneous understandings or agreements, written or oral, regarding such subject matter. No amendment to or modification of this Agreement will be binding unless in writing and signed by a duly authorized representative of Audiority.
Should you have any questions concerning this Agreement, please contact Audiority Srls at info@audiority.com
Copyright ©2010-2022 Audiority Srls. All rights reserved.
Last updated on May 19th, 2021
Thank You
We wanna thank you for buying Audiority Electric Matter plugin.
We hope you will enjoy it as much as we did.
If you have any question, concerns, technical issues or even for just say
‘Hello’, get in touch with us at:
info@audiority.com or checkout our site at
www.audiority.com
Cheers, Luca Follow us on:
Facebook
Twitter
SoundCloud
YouTube
Instagram
Official Facebook Support:
Audiority Audiophiles
Audiority User Area: (registration is required to access the UA and
download installers and license files)
Audiority User Area
Copyright © 2022 – Audiority Srls – All rights reserved.
Documents / Resources
|
audiority VST2 Electric Matter Flanger Filter Matrix
Pedal
[pdf] User Manual
VST2, Electric Matter Flanger Filter Matrix Pedal, Flanger Filter Matrix
Pedal, Electric Matter, VST2, Matrix Pedal
---|---
References
- Stream Audiority music | Listen to songs, albums, playlists for free on SoundCloud
- Audiority - Professional Audio Plugins VST, AAX, AU, CLAP
- Audiority - Professional Audio Plugins VST, AAX, AU, CLAP
- User Area - Audiority
- FAQ - Audiority
- Register - Audiority
- Audiority Srls (@audioritysound) • Instagram photos and videos
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>