IPX5 Tracer MaxTube TWS User Manual

IPX5 Tracer MaxTube TWS

Product Information

Specifications:

• Model: Tracer MaxTube TWS
• Ports: RESET Port, USB Port, Type-C Charging Jack, AUX Port
• Buttons: Backward/Volume Down, Forward/Volume Up, Play/Pause, Mode Button, Power Button
• Additional: Mic. Hole

Product Usage Instructions

Bluetooth Mode:

• Power Button: Long-press for Power On/Off. Activate Bluetooth on your mobile phone and pair with the Tracer MaxTube speaker.
• Mode Button: Short-press to switch playing modes, Long-press to pair or disconnect TWS.
• Play/Pause: Short-press to play or pause, Long-press to turn on/off the LED light on the side. Quickly double-press to activate voice assistant function.
• Backward/Volume Down: Short-press for volume down, Long-press for the last song.
• Forward/Volume Up: Short-press for volume up, Long-press for the next song.

USB Mode:

AUX-IN Mode:

Reset Functionality:
If the speaker does not turn off or respond, you can short-press the RESET button in the RESET Port with a small round pin to power off the device. Long- press the Volume Down button to power off the device and clear all Bluetooth & TWS connection memory, restoring factory settings.

Frequently Asked Questions (FAQ):

Q: How do I pair my mobile phone with the Tracer MaxTube speaker in Bluetooth mode?
A: To pair your mobile phone, ensure Bluetooth is activated on your phone, then long-press the Power Button on the speaker to turn it on. Once the speaker is on, search for available devices on your phone and select “Tracer MaxTube” to pair.

Q: What should I do if the speaker is unresponsive?
A: If the speaker does not respond, you can try resetting it by short-pressing the RESET button in the RESET Port using a small round pin. If that doesn’t work, contact customer support for further assistance.

Cautions:

• Do not hit or crush it seriously.
• Do not contact benzene, diluent and other chemicals.
• Do not use near by strong magnetic field or electric field.
• Avoid direct rays or heating appliances.
• Do not disassemble, repair or modify.
• Do not listen at large volume for long periods of time, so as not to injure the hearing.
• Do not clean the speaker with water and don’t immerse the speaker in the water. If use the speaker not by the right way and cause any quality problems, not support warranty. Kindly note above! Please clean the speaker with a slightly damp cloth.
• When using at low voltage, it may cause distortion of sound and please charge it in time.
• Bluetooth is compatible with common smart phones and tablets, but depending on the device or application you use, may not be able to support a particular feature.
  To ensure correct operation and avoid damage, please read this user manual carefully before using this product.

Features

• 2.0CH portable Bluetooth speaker
• Water-resistant IPX5, perfect for beach, poolside, boat and more outdoor activities
• With A2DP Bluetooth, wireless stream music from any Bluetooth-enabled device
• TWS function, achieve true wireless playing with double-enhanced stereo sound
• Hands-free Mic for easy picking up the call
• USB support
• Line-in function, suitable for PC, MID, TV and other audio devices
• Built-in lithium rechargeable battery 2000mAh

Specifications

• Bluetooth version: V5.3
• Speaker Size: 2 inch*2
• RMS power output: 5W*2=10W, 3Ω
• Peak power output: 10W*2=20W, 3Ω
• Battery Capacity: 3.7V, 2000mAh
• Frequency Response: 80HZ-16KHZ
• Bluetooth connecting range: 10m
• Product size: 240(L)92(W)92(H)MM
• The minimum charging power is 0.5W
• The max charging power is 5W

Package Contents

• 1xPortable Bluetooth Speaker
• 1xLanyard
• 1xType-C Charging cable
• 1xUser manual

Product Details

1. RESET Port
2. USB Port
3. Type-C Charging Jack
4. AUX Port
5. Backward/Volume Down
6. Forward/Volume Up
7. Play/Pause
8. Mode Button
9. Power Button
10. Mic. Hole

Bluetooth Mode:

• Power Button : Long-press for Power On/Off.
  Activate Bluetooth of mobile phone and pair with the speaker Tracer MaxTube.

• Mode Button M: Short-press to switch playing modes, Long-press to pair or disconnect TWS.

• Play/Pause : Short-press to play or pause, Long-press to turn on/off the LED light on side, quickly double-press to activate voice assistant function.

• Backward/Volume Down -: Short-press for volume down, Long-press for last song.

• Forward/Volume Up +: Short-press for volume up, Long-press for next song.

TWS Mode:
Turn on 2 identical speakers, both under BT mode.
Select one speaker and Long-press Mode button M to pair TWS, the speaker will make a tone to start to pair, and there will be a prompt tone again after paired successfully.
Connect the paired speaker with your phone via Bluetooth and play wirelessly.
Long-press Mode button M again to disconnect TWS.

• Mode Button M: Long-press to pair or disconnect TWS, Short-press to switch playing modes.
• Play/Pause : Short-press to play or pause, Long-press to turn on/off the LED light on side.
• Backward/Volume Down -: Short-press for volume down, Long-press for last song.
• Forward/Volume Up +t: Short-press for volume up, Long-press for next song.

USB Mode:

• Power Button : Long-press for Power On/Off.
• Mode Button M: Short-press to switch the playing modes.
• Play/Pause : Short-press to play or pause, Long-press to turn on/off the LED light on side.
• Backward/Volume Down -: Short-press for volume down, Long-press for last song.
• Forward/Volume Up +: Short-press for volume up, Long-press for next song.

Notes: Under any playing mode, when you insert a USB disk to the speaker, it will switch to play the USB disk.

AUX-IN Mode:

• Power Button : Long-press for Power On/Off.
• Mode Button M: Short-press to switch the playing modes.
• Play/Pause : Short-press to mute the speaker, Long-press to turn on/off the LED light on side.
• Volume Down -: Short-press for volume down, Long-press no function.
• Volume Up +: Short-press for volume up, Long-press no function.

Notes: When using an external device, all functions can be controlled by the external device.

Hands-free call:

• Under Bluetooth connection status, if there is an incoming call, user can short-press Play/Pause button to accept the call or long-press Play/Pause button to reject the call.
• During the call, user can long-press Play/Pause button to switch to talking on the phone.
• Short-press Play/Pause button to end the call.

Reset Functionality:
If the speaker does not turn off or respond, user can short-press the RESET button in RESET Port with a small round pin to power off device.

Long-press button Volume Down -, device will power off. Meanwhile it will clear all Bluetooth & TWS connection memory, and restore factory setting.

How to charge:

• Charge time should be around 3 hours.
• The unit does not have power bank function, it is forbidden to charge other device via this unit or to connect other device via the USB port.
• To protect the battery, please do not use the speaker while it is charging.

Charger not included
The charging voltage of the headphone case is DC 5V.
The power provided by the charger must be between the minimum 0.5 W required by the radio device and the maximum 5W to achieve the maximum charging speed.

Producent:
Megabajt Sp. z o.o., ul. Rydygiera 8, 01-793 Warszawa

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>