Tracer 2.2S FHD Pavo Car Camera Instructions

Tracer 2.2S FHD Pavo Car Camera

OVERVIEW

1| OK: turns ON/OFF camera, and confirms the selected option in the menu, starts recording/stops recording in video mode, takes a snapshot in photo mode, pause or start in playback mode.
---|---
2| Up: Used for navigating menu options, short press UP to turn on or turn off audio recording
3| Down: Used for navigating menu options
4| Mode/Menu: long press to switch modes, short press to enter menu.

Mode: select video recording/snapshot/playback

Menu: can be used to set video quality, photo quality, Video time, Motion detection, G-sensor, Date, etc.

5| TF Card Slot: insert a micro SD card to be able to record and save videos.
6| Reset: insert a pin if the device freezes to reboot it.
7| USB Port: connect a USB cable or car charger plug here.
8| Rear camera: can be used to record the rear window view, rear camera is optional in accessories.
9| Camera lens
10| Loudspeaker
11| Bracket: use suction bracket to install camera on car front window
12| Working indicator light
13| LCD

Safety instructions

• Keep the unit away from heat sources, direct sunlight, humidity, water and any other liquids.
• Do not operate the unit if it has been exposed to water, moisture or any other liquids to prevent against electric shock, explosion and/or injury to yourself and damage to the unit.
• Do not use the unit if it has been dropped or damaged in any way.
• Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
• Do not use the unit with wet hands.
• Do not use this unit for anything other than its intended use.
• Keep the unit out of reach of children. This appliance is not a toy.
• Batteries (battery pack or batteries installed) shall not be exposed to excessive heat place, such as sunshine, fire.

Installation guide

1. Turn off the car engine.
2. Insert the TF card into the recorder card slot. Please use high-speed TF card (Class10 or higher), the capacity 8-32GB
3. Fix the recorder to the suction cup bracket on the glass of the car.
4. Insert the car charger into the car cigarette lighter.
5. Connect the USB port to the car charger with a charging extension cable. The wiring extension cable can be laid along the edge of the windshield of the car during wiring.
6. Adjust the lens position to ensure that the lens is level with the ground.
7. Start the engine and check that the machine is installed correctly. When the machine is installed correctly, the system work indicator lights up; the machine starts to enter the recording state, and the recording indicator flashes. Please check if the picture on the display is normal.

Function introduction

1. Motion Detect: in standby, detect object is moving front of camera, camera will record video automatically, press OK button to stop and turn off the function
2. Loop recording: to select video time in 1/2/3/5 minutes, it will delete the first file automatically to keep recording
3. G-sensor: in video recording mode, when sudden changes occur in tilt or acceleration, the current video file will be locked automatically, it will not be deleted by loop recording function.
4. Parking mode: turn on Parking mode in menu, in standby mode, once camera detect any impact, it will turn on automatically and record video.

Product specification

DISPOSAL

The symbol of a crossed-out wheeled bin placed on electronic or electrical equipment, its packaging or accompanying documents means that the product may not be thrown out together with other waste. Used equipment may contain substances with toxic and carcinogenic properties, hazardous to human health and life, and poisoning the soil and groundwater. It is the user’s responsibility to hand over the used equipment to a designated collection point for its proper processing. For more information on recycling of electronic and electrical equipment, please contact your local authorities, waste disposal services and the place where you purchased this product. The household plays an important role in contributing to the reuse and recovery of secondary raw materials, including recycling, waste equipment. At this stage, attitudes are formed that affect the preservation of the common good, which is a clean natural environment.

Producent: Megabajt Sp. z o.o., ul. Rydygiera 8, 01-793 Warszawa

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>