MICHELIN DW201 Connected Driving Data Assistant Instruction Manual

MICHELIN DW201 Connected Driving Data Assistant

JUST RECEIVED THE DEVICE?

In just few steps, you will be ready to share with us your driving data and experience the BETTER DRIVING COMMUNITY

YOU WILL NEED

• Your vehicle ;
• Your device Dwilen II ;
• The plug extension ;
• Supplied stickers and cleaning wipe ;
• This operating manual ;
• Your mobile phone ;
• Supplied login and password
• 10 minutes, not more!

FIND YOUR OBD PLUG ON VEHICULE

Look up in your car for your OBD plug (also known as diagnostic plug). You may find it in one on the highlighted area below. Some vehicle requires a platic part to be removed in order to make this OBD plug visible. You can of course put back your platic part after device installation:

FOUND IT ?
YES !
Keep in mind the plug location. You will need to plug your device on it at step 3.
NO !
You may find photos and specific indications for your vehicle
on the following website : www.outilsobdfacile.fr/emplacement-prise- connecteur-obd.php

INSTALL YOUR DEVICE WITH THE APPLICATION

Download
« Better Driving Community »
on your mobile phone in your application store:

Enter your login/password and follow pairing wizard inside the application. Make sure your Bluetooth is enabled.

NEED SUPPORT ?
Feel free to contact our support team through integrated help section in the mobile application.

END OF INSTALLATION

• Open, if any, the OBD plug casing.

• Find a sleek surface next to the OBD plug. You can for example stick the device on the back of the OBD plug case, if remaining space allows it.
  DO NOT STICK THE DEVICE ON A DOOR OR ON THE MOVING PART OF YOUR GLOVEBOX, AS IT WILL PREVENT DEVICE FROM CORRECTLY RECORD YOUR DRIVING DATA

• Clean the sleek surface with provided cleaning wipe. And put the supplied sticker on it when alcohol from cleaning wipe has completely dry.

• When asked by the mobile application, plug the extension an device.
  

• If installation succeeds then you can finalize the installation by sticking your device on the prepared sticker.

• Be sure to firmly press on device for 10 seconds at least in order to

• Close, if any, the OBD case with caution.

ALL SET ?

The device light is bright blue : installation success!
Drive a few trips to get first informations and personal advices directly in your mobile application.

FAQ

HOW DOES IT WORKS ?

IS IT POSSIBLE TO USE THE DEVICE ALONGSIDE OTHER BLUETOOTH DEVICES AT THE SAME TIME ?
Yes, you can use hands-free device or any other Bluetooth devices while connected to Dwilen II device.

IS IT POSSIBLE TO TAKE A BREAK FROM USING THE EQUIPMENT OR STOP IT COMPLETELY ?
Yes, at any time you may stop recording trip data, stop upload of trip on our servers and/or remove data from mobile though Parameters menu of your application. Might you want to stop completely, please contact our support in order return back free of charge your device.

CAN THERE BE MORE THAN ONE DRIVER FOR THE SAME VEHICLE ?
Yes , but driving scores will not be personalised. They will be linked to the device and therefore to the vehicle.

WHAT IF I CHANGE MY VEHICLE ?
It is of course possible. Please contact our support in order to edit your profile informations.

PRECAUTIONS FOR USE

Do not expose to water or submerge the device in liquid.
Do not leave the device near a naked flame.
Do not take the device apart or open it up.
Do not drop the device.
Do not plug device other than your OBD plug.
If the device is no longer working, please contact our support service to have it

This equipment complies with the requirements for CE marking for use in a vehicle and respects all the European conditions and regulations applicable, in particular those relating to safety, user health, electro-mechanical compatibility and reducing environmental harm. More information on website : https://ddi.michelin.com/ce/

Waste Electrical and Electronic Equipment (WEEE) Directive
The waste bin on wheels symbol indicates that this product should not be treated as domestic waste. In accordance with European Directive 2012/19/EU relating to waste electrical and electronic equipment (WEEE), this electrical product should never be discarded as unsorted municipal waste. Please recycle this product by returning it to its point of sale, or to your local recycling collection point. By acting in this way you are contributing to protecting the environment

TECHNICAL SPECIFICATIONS

Direct current (IEC60417

The symbol indicates that the equipment is designed for direct current only; to identify the right power sources.

FCC ID: FI5-DW201 / IC: 5056A-DW201 / Model: Dwilen 2.14 / PMN: Dwilen 2 Changes or modifications not expressly approved by MICHELIN could void the user’s authority to operate the equipment.

FCC Part 15 compliance statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on, the user is encouraged to try to correct interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Licence-Exempt Radio Apparatus (ISED)

This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

1. This device may not cause interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency (RF) Exposure Compliance of Radiocommunication for mobile Apparatus

To satisfy FCC and ISED RF Exposure requirements for mobile devices, a separation distance of 20 cm or more should be maintained between the antenna of this device and persons during operation. To ensure compliance, operation at closer than this distance is not recommended. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

References

• Norme CE Boitiers connectés - Driving Data To Intelligence
• Quelle prise diagnostic OBD pour votre voiture? Trouvez facilement la votre!
• Norme CE Boitiers connectés - Driving Data To Intelligence

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>