FORTIN Muzzle Pedal User Manual
- June 11, 2024
- FORTIN
Table of Contents
BLACKED OUT
EDITION
Muzzle Pedal
All the same features as the original Zuul but blacked-out!
The mini Zuul ‘s threshold knob also controls the dynamics of the gate
circuit. Perfect for guitar, bass or any signal source because of the high
quality studio specifications.
Use in front of an amplifier or in a series effects loop. Dual colour LED for
visual feedback gating action: Green = Open, Orange = Closed, Off = Bypass
The KEY input signal can be directly from your guitar (r.e. split from Roach
or Spliff) or other signal source which lets you go from clean to high gain
without changing the Threshold knob. This powerful feature lets you control
the gate with a different signal than what flows through the input/output
jacks of the ZUUL .
To ensure you get the absolute best out of your new pedal, we strongly
recommend you take some time just playing with it to get to know the controls
and how they react. Yes, that is right, we want you to play with it as much as
possible
BYPASS – True bypass footwitch.
GATE – Adjusts how much level is required to open the noise gate and
allow a signal to pass through.
KEY – Only applicable for 3CM and 4CM
- Plug your guitar directly into this so the Zuur can trigger directly from your guitar without being affected by earlier placed boosts or dirt pedals.
- The Zuur functions normally as a gate without the use of the Key Input 2CM (cable method) but for the very best response, we recommend using the Key In via 3CM (using the Roach of Spliff) or 4CM.
- A splitter cable will be needed to separate the in/out of the Zuul’Key.
Plug this into the rest of your pedal board chain (for 3CM and 4CM).
GROUND LIFT SWITCH – Use this switch to eliminate possible noise
created by ground loops when using the KEY in 3CM or 4CM.
ZUUL’ IN – To amp effects (3CM and 4CM) / Instrumnet in (2CM)
ZUUL’ OUT – To time based effects (modulations, reverbs, delays
etc) in 3CM and 4CM / Out to next unit in chain (2CM).
POWER – 9-12vDC center pin negative (fully regulated) external
adapter/power supply only. Power draw 40mA
WARRANTY For the full and up-to-date information about the Fortin
warranty, please visit our website –
www.fortinamps.com. You can also email us at
info@fortinamps.com.