AFX MOTORSPORTS SKI088-B A-Arm Guards Instruction Manual
- June 11, 2024
- AFX MOTORSPORTS
Table of Contents
AFX MOTORSPORTS SKI088-B A-Arm Guards
Product Information
A-Arm Guards for Polaris RZR S 900 2015-2019
The A-Arm Guards are designed for off-road use only and are compatible with Polaris RZR S 900 models from 2015-2019. The package includes two A-Arm guards, hardware, and an installation manual. The guards are made of durable material to provide protection to the front suspensions of the vehicle.
Product Usage Instructions
- Ensure all screws are tight before installation.
- Place the two A-Arm guards at the front of the vehicle’s bottom suspension as shown in the image.
- Using the included hardware, insert four 1/4 x 1 1/2 screws along with nuts and shims through the front of the A-Arm guards and four 1/4 x 1 screws through the bottom of the suspension on each side. Repeat the process on the other side.
- Use a 3/4 wrench, 7/32 Allen key, and a 9/16 or 14 mm combination wrench to tighten the screws securely.
Note: The A-Arm guards should look like the image provided in the installation manual after installation. A liability statement is also included in the manual.
THANK YOU
FOR PURCHASING AT AFX MOTORSPORTS
HOW TO INSTALL
Pieces included:
- (x2) A-Arm guards
Hardware:
(4x) 1/4” x 1” screws
(4x) 1/4” x 1 1/2” screws
(8x) 1/4” Nuts
(8x) 1/4” Flat Washer
Tools needed (Not Included):
- 3/4” Wrench.
- 7/32” Allen Key.
- 9/16” or 14 mm Combination Wrench.
INSTALLATION
- The front suspensions will be placed at the front of the vehicle at the bottom, as shown in the image.
- Place the 1/4″ x 1 1/2 screws along with nut and shim (included in the package) in the front of the A Arm-Guards and the 1/4″ x 1″ screws in the bottom of suspension (as shown in the picture). Repeat in the other side.
- Make sure all screws are tight, your a-arm guards should look like this.
Liability Statement
AF1 Motorsports products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty provided by AF1 Motorsports and is not recommended. AF1 Motorsports products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact AF1 Motorsports to verify that they will work together. Although AF1 Motorsports has thousands of satisfied customers, user should be aware that installing bumpers, rock sliders, spare tire carriers, etc. will change the ride of machine and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No warranty or representation is made as to this product’s ability to protect user from severe injury or death. AF1 Motorsports urges operators and occupants to wear a helmet and appropriate riding gear at all times. By purchasing and installing AF1 Motorsports products, user agrees that should damages occur, AF1 Motorsports will not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges. AF1 Motorsports, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased from AF1 Motorsports. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the product that gave rise to the claim. AF1 Motorsports will warranty only parts provided by AF1 Motorsports. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered by AF1 Motorsports. AF1 Motorsports parts and products are not warrantied if item was not installed properly, misused, or modified.
For technical support, please write us to:
info@afxmotorsports.com or call us at: Ph.
956-242-6521
www.afxmotorsports.com
4610 Modern Lane, Laredo, TX 78041 Ph.
956-242-6521
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>